参数资料
型号: 73S1210F-68IMR/F/P
厂商: Maxim Integrated Products
文件页数: 41/126页
文件大小: 0K
描述: IC SMART CARD READER PROG 68-QFN
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
系列: 73S12xx
核心处理器: 80515
芯体尺寸: 8-位
速度: 24MHz
连通性: I²C,智能卡,UART/USART
外围设备: LED,POR,WDT
输入/输出数: 8
程序存储器容量: 32KB(32K x 8)
程序存储器类型: 闪存
RAM 容量: 2K x 8
电压 - 电源 (Vcc/Vdd): 2.7 V ~ 6.5 V
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 68-VFQFN 裸露焊盘
包装: 带卷 (TR)
DS_1210F_001
73S1210F Data Sheet
Rev. 1.4
21
Program Status Word (PSW):
Table 9: PSW Register
MSB
LSB
CV
AC
F0
RS1
RS
OV
P
Bit
Symbol
Function
PSW.7
CV
Carry flag.
PSW.6
AC
Auxiliary Carry flag for BCD operations.
PSW.5
F0
General purpose Flag 0 available for user.
PSW.4
RS1
Register bank select control bits. The contents of RS1 and RS0 select the
working register bank:
RS1/RS0
Bank Selected
Location
00
Bank 0
(0x00 – 0x07)
01
Bank 1
(0x08 – 0x0F)
10
Bank 2
(0x10 – 0x17)
11
Bank 3
(0x18 – 0x1F)
PSW.3
RS0
PSW.2
OV
Overflow flag.
PSW.1
F1
General purpose Flag 1 available for user.
PSW.0
P
Parity flag, affected by hardware to indicate odd / even number of “one” bits
in the Accumulator, i.e. even parity.
Stack Pointer: The stack pointer (SP) is a 1-byte register initialized to 0x07 after reset. This register is
incremented before PUSH and CALL instructions, causing the stack to begin at location 0x08.
Data Pointer: The data pointer (DPTR) is 2 bytes wide. The lower part is DPL, and the highest is DPH.
It can be loaded as a 2-byte register (MOV DPTR,#data16) or as two registers (e.g. MOV DPL,#data8). It
is generally used to access external code or data space (e.g. MOVC A,@A+DPTR or MOVX A,@DPTR
respectively).
Program Counter: The program counter (PC) is 2 bytes wide initialized to 0x0000 after reset. This
register is incremented during the fetching operation code or when operating on data from program
memory. Note: The program counter is not mapped to the SFR area.
Port Registers: The I/O ports are controlled by Special Function Register USR70. The contents of the
SFR can be observed on corresponding pins on the chip. Writing a 1 to any of the ports (see Table 10)
causes the corresponding pin to be at high level (3.3V), and writing a 0 causes the corresponding pin to
be held at low level (GND). The data direction register UDIR70 define individual pins as input or output
pins (see the User (USR) Ports section for details).
Table 10: Port Registers
Register
SFR
Address
R/W
Description
USR70
0x90
R/W
Register for User port bit 7:0 read and write operations (pins USR0…
USR7).
UDIR70
0x91
R/W
Data direction register for User port bits 0:7. Setting a bit to 0 means
that the corresponding pin is an output.
相关PDF资料
PDF描述
73S1215F-68IMR/F/P IC SMART CARD READER PROG 68-QFN
73S1217F-68IMR/F/P IC SMART CARD READER PROG 68-QFN
73S1217F-68MR/F/PE IC SOC SMART CARD READER 68QFN
73S8010C-ILR/F IC SMART CARD INTERFACE 28-SOIC
73S8010R-ILR/F IC SMART CARD INTERFACE 28-SOIC
相关代理商/技术参数
参数描述
73S1210F-68M/F/PB 制造商:Maxim Integrated Products 功能描述:- Trays
73S1210F-68M/F/PG 功能描述:8位微控制器 -MCU RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
73S1210F-68M/F/PH 功能描述:8位微控制器 -MCU RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
73S1210F-68M/F/PJ 制造商:Maxim Integrated Products 功能描述:SCR+PPAD/SRL INTFC/PWR MGT-3.11CODE - Rail/Tube
73S1210F-68MR/F/PG 功能描述:8位微控制器 -MCU RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT