- 您现在的位置：买卖IC网 > PDF目录6158 > CSR0603FKR500 (Stackpole Electronics Inc)RES 0.5 OHM 1/8W 1% 0603 SMD PDF资料下载
参数资料
| 型号： | CSR0603FKR500 |
| 厂商： | Stackpole Electronics Inc |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | RES 0.5 OHM 1/8W 1% 0603 SMD |
| 产品变化通告： | Global Part Number Change 9/Aug/2010 |
| 产品目录绘图： | CSR, CSRN Series Footprint CSR, CSRN Series |
| 标准包装： | 1 |
| 系列： | CSR |
| 电阻（欧姆）： | 0.5 |
| 功率（瓦特）： | 0.125W，1/8W |
| 复合体： | 厚膜 |
| 特点： | 电流检测 |
| 温度系数： | ±300ppm/°C |
| 容差： | ±1% |
| 封装/外壳： | 0603（1608 公制） |
| 尺寸/尺寸： | 0.063" L x 0.032" W（1.60mm x 0.80mm） |
| 高度： | 0.022"（0.55mm） |
| 端子数： | 2 |
| 包装： | 标准包装 |
| 产品目录页面： | 2288 (CN2011-ZH PDF) |
| 其它名称： | CSR0603FKR500DKR CSR1/80.5FIDKR CSR1/80.5FIDKR-ND |
CSR/CSRN Series
Thick Film Current Sensing Resistor
Stackpole Electronics, Inc.
Resistive Product Solutions
Performance Characteristics
Test
High Temperature Exposure
Test Specification
MIL-STD-202 Method 108
Test Conditions
1000 hrs. @ T=155°C. Unpowered. Measurement
at 24 ± 4 hours after test conclusion.
Test Limits
1% Tol: (±1.0% +0.05 )
2%, 5% Tol:(±1.5% +0.10 )
Typical
≤ 0.5%
1000 Cycles (-55°C to +125°C) Measurement at
Temperature Cycling
JESD22 Method JA-104
24 ± 4 hours after test conclusion.
30 min maximum dwell time at each temperature
1% Tol: (±0.5% +0.05 )
2%, 5% Tol:(±1.5% +0.10 )
≤ 0.5%
extreme. 1 min. maximum transition time.
Biased Humidity
Operational Life
External Visual
MIL-STD-202 Method 103
MIL-STD-202 Method 108
MIL-STD 883 Method 2009
1000 hours 85°C/85% RH. Note: Specified conditions:
10% of operating power. Measurement at 24 ± 4
hours after test conclusion.
Condition D Steady State T A =125°C at rated power.
Measurement at 24 ± 4 hours after test conclusion.
Electrical test not required. Inspect device
construction, marking and workmanship
1% Tol: (±1.00% +0.10 )
2%, 5% Tol:(±2.00% +0.10 )
1% Tol: (±1.00% +0.10 )
2%, 5% Tol:(±2.00% +0.10 )
--
≤ 0.5%
≤ 0.5%
Pass
Verify physical dimensions to the applicable device
Physical Dimensions
JESD22 Method JB-100
detail specification. Note: User(s) and Suppliers spec.
--
Pass
Electrical test not required.
Resistance to Solvents
Mechanical Shock
MIL-STD 202 Method 215
MIL-STD 202 Method 213
Note: Aqueous wash chemical - OKEM Clean or
equivalent. Do not use banned solvents.
Figure 1 of Method 213. Condition C.
Marking unsmeared
1% Tol: (±0.25% +0.05 )
2%, 5% Tol:(±1.00% +0.05 )
Pass
≤ 0.5%
5 g's for 20 min., 12 cycles each of 3 orientations.
Vibration
MIL-STD 202 Method 204
Note: Use 8"X5" PCB 0.031" thick 7 secure points on
one long side and 2 secure points at corners of
opposite sides. Parts mounted within 2" from any
1% Tol: (±0.50% +0.05 )
2%, 5% Tol:(±1.00% +0.05 )
≤ 0.5%
secure point. Test from 10 - 2000 Hz.
Resistance to Soldering Heat
MIL-STD 202 Method 210
Condition B no pre-heat of samples. Note: Single
wave solder - Procedure 2 for SMD.
1% Tol: (±0.50% +0.05 )
2%, 5% Tol:(±1.00% +0.05 )
≤ 0.5%
With the electrometer in direct contact with the
discharge tip, verify the voltage setting at levels
ESD
AEC-Q200-002
of ±500 V, ±1kV, ±2kV, ±4kV, ±8kV.
--
Pass
The electrometer reading shall be within ±10%
for voltages from 500 V to ≤ 8 kV.
Electrical test not required. Magnification 50X.
Conditions:
Solderability
J-STD-002
SMD:
a) Method B, 4 hrs @ 155°C dry heat @ 235°C.
> 95% Coverage
Pass
b) Method B @ 215°C category 3.
c) Method D category 3 @ 260°C.
Parametrically test per lot and sample size
Electrical Characterization
User Spec
requirements, summary to show Min, Max, Mean and
Standard Deviation at room as well as Min and Max
--
Pass
operating temperatures.
Flammability
Board Flex
Terminal Strength (SMD)
Flame Retardance
UL-94
AEC-Q200-005
AEC-Q200-006
AEC-Q200-001
V-0 or V-1 are acceptable.
Electrical test not required.
60 second minimum holding time.
No ignition of tissue or scorching
of pine board.
1% Tol: (±1.00% +0.05 )
2%, 5% Tol:(±1.00% +0.05 )
None broken
No flame
Pass
≤ 0.5%
Pass
Pass
Operating Temperature Range: -55oC to +155oC
Rev Date: 11/05/2012
This specification may be changed at any time without prior notice
Please confirm technical specifications before you order and/or use.
4
www.seielect.com
marketing@seielect.com
相关PDF资料 |
PDF描述 |
|---|---|
| 68685-317LF | CONN RCPT 17POS .100" SNG ROW |
| 963122-2000-AR-PT | CONN SOCKET SGL 22POS GOLD SMD |
| 956226-2700-AR-PR | CONN SOCKET 26POS 2MM VERT SMD |
| TSW-102-17-T-S | CONN HEADER 2POS .100" SNGL TIN |
| TSW-102-14-T-S | CONN HEADER 2POS .100" SNGL TIN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| A3PE3000L-1FG896M | 制造商:Microsemi Corporation 功能描述:FPGA PROASIC3EL FAMILY 3M GATES 130NM (CMOS) TECHNOLOGY 1.2 - Trays 制造商:Microsemi Corporation 功能描述:IC FPGA 620 I/O 896FBGA |
| A3PE3000L-1FGG144M | 制造商:ACTEL 制造商全称:Actel Corporation 功能描述:Military ProASIC3/EL Low-Power Flash FPGAs |
| A3PE3000L-1FGG324 | 功能描述:IC FPGA 1KB FLASH 3M 324-FBGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - FPGA（现场可编程门阵列） 系列:ProASIC3EL 产品培训模块:Three Reasons to Use FPGA's in Industrial Designs Cyclone IV FPGA Family Overview 特色产品:Cyclone? IV FPGAs 标准包装:60 系列:CYCLONE® IV GX LAB/CLB数:9360 逻辑元件/单元数:149760 RAM 位总计:6635520 输入/输出数:270 门数:- 电源电压:1.16 V ~ 1.24 V 安装类型:表面贴装 工作温度:0°C ~ 85°C 封装/外壳:484-BGA 供应商设备封装:484-FBGA（23x23） |
| A3PE3000L-1FGG324I | 功能描述:IC FPGA 1KB FLASH 3M 324-FBGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - FPGA（现场可编程门阵列） 系列:ProASIC3EL 标准包装:1 系列:ProASICPLUS LAB/CLB数:- 逻辑元件/单元数:- RAM 位总计:129024 输入/输出数:248 门数:600000 电源电压:2.3 V ~ 2.7 V 安装类型:表面贴装 工作温度:- 封装/外壳:352-BFCQFP，带拉杆 供应商设备封装:352-CQFP（75x75） |
| A3PE3000L-1FGG484 | 功能描述:IC FPGA 1KB FLASH 3M 484-FBGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - FPGA（现场可编程门阵列） 系列:ProASIC3EL 产品培训模块:Three Reasons to Use FPGA's in Industrial Designs Cyclone IV FPGA Family Overview 特色产品:Cyclone? IV FPGAs 标准包装:60 系列:CYCLONE® IV GX LAB/CLB数:9360 逻辑元件/单元数:149760 RAM 位总计:6635520 输入/输出数:270 门数:- 电源电压:1.16 V ~ 1.24 V 安装类型:表面贴装 工作温度:0°C ~ 85°C 封装/外壳:484-BGA 供应商设备封装:484-FBGA（23x23） |
发布紧急采购，3分钟左右您将得到回复。