- 您现在的位置：买卖IC网 > PDF目录19334 > MAX6698UE34+ (Maxim Integrated)IC TEMP MONITOR 7CH 16-TSSOP PDF资料下载
参数资料
| 型号： | MAX6698UE34+ |
| 厂商： | Maxim Integrated |
| 文件页数： | 16/24页 |
| 文件大小： | 321K |
| 描述： | IC TEMP MONITOR 7CH 16-TSSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 96 |
| 功能： | 温度监控系统（传感器） |
| 传感器类型： | 内部和外部 |
| 感应温度： | -40°C ~ 125°C |
| 精确度： | ±3.5°C 本地（最大），±3°C 远程（最大） |
| 拓扑： | ADC，缓冲器，多路复用器，寄存器库 |
| 输出类型： | 2 线串行，I²C?/SMBUS? |
| 输出警报： | 是 |
| 输出风扇： | 是 |
| 电源电压： | 3 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 16-TSSOP |
| 包装： | 管件 |
7-Channel Precision Remote-Diode, Thermistor,
and Local Temperature Monitor
16 ______________________________________________________________________________________
VREF supplies a reference voltage (1V nominal) to bias
the thermistor/REXT_ voltage-divider. The voltage
across REXT is measured by the MAX6698s ADC,
resulting in a voltage that is directly proportional to tem-
perature. The data in the thermistor registers gives the
voltage across REXT as a fraction of the reference volt-
age (1LSB = 0.5% of VREF).
Because thermistors have nonlinear temperature-resis-
tance functions, and because different thermistors have
different functions, it is important to understand the
relationship between temperature, REXT, and the volt-
age across REXT for a given thermistor. Table 13
shows temperature vs. the thermistor channel data for a
Betatherm 10k3A1 thermistor and REXT=1600&.
Thermal Mass and Self-Heating
When sensing local temperature, the MAX6698 mea-
sures the temperature of the printed-circuit board
(PCB) to which it is soldered. The leads provide a good
thermal path between the PCB traces and the die. As
with all IC temperature sensors, thermal conductivity
between the die and the ambient air is poor by compar-
ison, making air temperature measurements impracti-
cal. Because the thermal mass of the PCB is far greater
than that of the MAX6698, the device follows tempera-
ture changes on the PCB with little or no perceivable
delay. When measuring the temperature of a CPU or
other IC with an on-chip sense junction, thermal mass
has virtually no effect; the measured temperature of the
junction tracks the actual temperature within a conver-
sion cycle.
When measuring temperature with discrete remote tran-
sistors, the best thermal response times are obtained
with transistors in small packages (i.e., SOT23 or
SC70). Take care to account for thermal gradients
between the heat source and the sensor, and ensure
that stray air currents across the sensor package do
not interfere with measurement accuracy. Self-heating
does not significantly affect measurement accuracy.
Remote-sensor self-heating due to the diode current
source is negligible.
ADC Noise Filtering
The integrating ADC has good noise rejection for low-
frequency signals such as power-supply hum. In envi-
ronments with significant high-frequency EMI, connect
an external 2200pF capacitor between DXP_ and
DXN_. Larger capacitor values can be used for added
filtering, but do not exceed 3300pF because it can
introduce errors due to the rise time of the switched
current source. High-frequency noise reduction is
needed for high-accuracy remote measurements.
Noise can be reduced with careful PCB layout as dis-
cussed in the PCB Layout section.
PCB Layout
Follow these guidelines to reduce the measurement
error when measuring remote temperature:
1) Place the MAX6698 as close as is practical to the
remote diode. In noisy environments, such as a
computer motherboard, this distance can be 4in to
8in (typ). This length can be increased if the worst
noise sources are avoided. Noise sources include
CRTs, clock generators, memory buses, and PCI
buses.
2) Do not route the DXP-DXN lines next to the deflec-
tion coils of a CRT. Also, do not route the traces
across fast digital signals, which can easily intro-
duce +30癈 error, even with good filtering.
MANUFACTURER
MODEL NO.
Central Semiconductor (USA)
CMPT3904
Rohm Semiconductor (USA)
SST3904
Samsung (Korea)
KST3904-TF
Siemens (Germany)
SMBT3904
Zetex (England)
FMMT3904CT-ND
Table 11. Remote-Sensors Transistor
Manufacturers
Note: Discrete transistors must be diode connected (base
shorted to collector).
PART
SMBus SLAVE ID PIN-PA KA E
MAX6698EE34
0011 010
16 QSOP
MAX6698EE38
0011 100
16 QSOP
MAX6698EE99
1001 100
16 QSOP
MAX6698EE9C
1001 110
16 QSOP
MAX6698UE34
0011 010
16 TSSOP
MAX6698UE38
0011 100
16 TSSOP
MAX6698UE99
1001 100
16 TSSOP
MAX6698UE9C
1001 110
16 TSSOP
Table 12. Slave Address
Table 12 lists the MAX6698 slave addresses.
Slave Addresses
相关PDF资料 |
PDF描述 |
|---|---|
| RSM40DRSN | CONN EDGECARD 80POS DIP .156 SLD |
| TAJE107M010RNJ | CAP TANT 100UF 10V 20% 2917 |
| THJD336K020RJN | CAP TANT 33UF 20V 10% 2917 |
| GEM24DSES-S243 | CONN EDGECARD 48POS .156 EYELET |
| VI-2TK-CW-F4 | CONVERTER MOD DC/DC 40V 100W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5254BRU10 | 功能描述:IC DGTL POT QUAD 10K I2C 20TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| AD5254BRU100 | 功能描述:IC DGTL POT QUAD 100K 20-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| AD5254BRU100-RL7 | 功能描述:IC DGTL POT QUAD 100K 20-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| AD5254BRU10-RL7 | 功能描述:IC DGTL POT QUAD 10K 20-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| AD5254BRU1-RL7 | 功能描述:IC DGTL POT QUAD 1K 20-TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。