- 您现在的位置：买卖IC网 > PDF目录20876 > LTC3490ES8#TRPBF (Linear Technology)IC LED DRIVER PHOTO FLASH 8-SOIC PDF资料下载
参数资料
| 型号： | LTC3490ES8#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 6/12页 |
| 文件大小： | 0K |
| 描述： | IC LED DRIVER PHOTO FLASH 8-SOIC |
| 标准包装： | 2,500 |
| 恒定电流： | 是 |
| 拓扑： | PWM，升压（升压） |
| 输出数： | 1 |
| 内部驱动器： | 是 |
| 类型 - 主要： | 闪灯/白光 |
| 类型 - 次要： | 白色 LED |
| 频率： | 1MHz ~ 1.6MHz |
| 电源电压： | 1 V ~ 3.2 V |
| 输出电压： | 2.8 V ~ 4 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
| 工作温度： | -40°C ~ 85°C |
LTC3490
OPERATIO
I LED = 500 ? ? CTRL – 0 . 2 ? mA
TheLTC3490isahighefficiency,constantcurrentsource
for 1W high intensity white LEDs. These high intensity
LEDs require a fixed current of 350mA with a voltage
compliance of 2.8V to 4V.
The LTC3490 operates with 1 or 2 NiMH or alkaline cells.
It functions as a boost converter with a current sense re-
sistor providing the control feedback. If the battery voltage
is greater than the required LED compliance, it will cycle
off periodically to maintain the correct average current. It
features a low voltage start-up circuit that will start with an
input voltage of only 1V. Once the drive voltage exceeds
2.3V, the circuit operates from the drive voltage.
All of the loop compensation is internal; only the main filter
capacitor is needed for stable operation.
Dimming Function
During normal operation with the CTRL/SHDN pin con-
nected to V IN , the LED drive current is controlled at
350mA. The drive current can be reduced by changing the
voltage on the CTRL/SHDN pin.
For V IN ? 0.2 < V CTRL < V IN ? 0.9, the LED current is
to the battery voltage. The LED drive current is given by the
formula:
? V ?
? V IN ?
When V CTRL > V IN ? 0.9, the LED drive current is clamped
at 350mA.
Open-Circuit Protection
Since this is a boost converter attempting to drive a cur-
rent into the load, an open or high impedance load will cause
the regulator loop to increase the output voltage in an ef-
fort to achieve regulation. To protect the device, maximum
output voltage is limited to 4.7V under all conditions.
Undervoltage Sense and Protection
The undervoltage lockout prevents excessive inductor
peak current and protects the batteries from deep dis-
charging which can damage them. The low-battery indica-
tor allows the end user to be made aware that the batteries
are nearing the end of their useful life.
proportional to V CTRL /V IN . This allows a simple potenti-
ometer from V IN to control the current without sensitivity
3490fa
6
相关PDF资料 |
PDF描述 |
|---|---|
| NDL2412SC | CONV DC/DC 2W 24VIN 12VOUT SIP |
| LTC3220IPF#TRPBF | IC LED DRVR QVGA DISPLAY 28UTQFN |
| P51-3000-S-Z-D-4.5V-000-000 | SENSOR 3000PSI 1/4-18NPT .5-4.5V |
| REC5-2405DRWZ/H2/A/SMD/CTRL | CONV DC/DC 5W 9-36VIN +/-05VOUT |
| GEC13DREI | CONN EDGECARD 26POS .100 EYELET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7765 | 制造商:AD 制造商全称:Analog Devices 功能描述:24-Bit, 8.5 mW, 109 dB, 128/64/32 kSPS ADCs |
| AD7765_07 | 制造商:AD 制造商全称:Analog Devices 功能描述:24-Bit, 156 kSPS, 112 dB ヒ-ツ ADC with On-Chip Buffers and Serial Interface |
| AD7765BRUZ | 功能描述:IC ADC 24BIT S/D 156KSPS 28TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 其它有关文件:TSA1204 View All Specifications 标准包装:1 系列:- 位数:12 采样率（每秒）:20M 数据接口:并联 转换器数目:2 功率耗散（最大）:155mW 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP（7x7） 包装:Digi-Reel® 输入数目和类型:4 个单端，单极；2 个差分，单极 产品目录页面:1156 (CN2011-ZH PDF) 其它名称:497-5435-6 |
| AD7765BRUZ-REEL7 | 功能描述:IC ADC 24BIT S/D 156KSPS 28TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| AD7766 | 制造商:AD 制造商全称:Analog Devices 功能描述:24-Bit, 8.5 mW, 109 dB, 128/64/32 kSPS ADCs |
发布紧急采购，3分钟左右您将得到回复。