- 您现在的位置：买卖IC网 > PDF目录17729 > U2K110CG100FB-T (Taiyo Yuden)CAP ARRAY 2CH 10PF 50V 0504 PDF资料下载
参数资料
| 型号： | U2K110CG100FB-T |
| 厂商： | Taiyo Yuden |
| 文件页数： | 12/16页 |
| 文件大小： | 0K |
| 描述： | CAP ARRAY 2CH 10PF 50V 0504 |
| 标准包装： | 10 |
| 电容： | 10pF |
| 电压 - 额定： | 50V |
| 电介质材料： | 陶瓷 |
| 电容器数量： | 2 |
| 电路类型： | 隔离 |
| 温度系数： | C0G，NP0 |
| 容差： | ±10% |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 0504（1210 公制） |
| 尺寸/尺寸： | 0.054" L x 0.039" W（1.37mm x 1.00mm） |
| 高度 - 座高（最大）： | 0.024"（0.60mm） |
| 包装： | 剪切带 (CT) |
| 其它名称： | 587-1025-1 |
■ RELIABILITY DATA
16. Humidity Loading
Temperature Compensating
（ Class 1 ）
Speci?ed
Value
Standard
High Frequency Type
Appearance: No abnormality
Capacitance change: Within ± 7.5% or ± 0.75pF, whichever is larger.
Q ： C ＜ 30pF ： Q ≧ 100 ＋ 10C/3
C ≧ 30pF ： Q ≧ 200 （ C ： Nominal capacitance ）
Insulation resistance: 500 M Ω min.
Appearance: No abnormality
Capacitance change: C ≦ 2pF ： Within ± 0.4 pF
C ＞ 2pF ： Within ± 0.75 pF （ C ： Nominal capacitance ）
Insulation resistance: 500 M Ω min.
High Permittivity （ Class 2 ） Note 1
【 Test Methods and Remarks 】
Class 1
Appearance: No abnormality
Capacitance change: Within ± 12.5% （ BJ, B7, C6, C7 ）
Within ± 30% （ F ）
Dissipation factor ： 5.0% max. （ BJ, B7, C6, C7 ）
11.0% max. （ F ）
Insulation resistance: 25 M Ωμ F or 500 M Ω , whichever is smaller.
Class 2
Standard
High Frequency Type
All items
Preconditioning
Temperature
Humidity
Duration
Applied voltage
40 ± 2 ℃
None
60 ± 2 ℃
90 to 95 ％ RH
500 ＋ 24/ ー 0 hrs
Rated voltage
Preconditioning
Temperature
Humidity
Duration
Voltage treatment
（ Rated voltage are applied for 1 hour at 40 ℃） Note 3
40 ± 2 ℃
90 to 95 ％ RH
500 ＋ 24/ ー 0 hrs
Charge/discharge current
Recovery
50mA max.
6 to 24 hrs （ Standard condition ） Note 5
Applied voltage
Charge/discharge current
Recovery
Rated voltage
50mA max.
24 ± 2 hrs （ Standard condition ） Note 5
17. High Temperature Loading
Temperature Compensating
（ Class 1 ）
Speci?ed
Value
Standard
High Frequency Type
Appearance: No abnormality
Capacitance change: Within ± 3% or ± 0.3pF, whichever is larger.
Q ： C ＜ 10pF ： Q ≧ 200 ＋ 10C
10 ≦ C ＜ 30pF ： Q ≧ 275 ＋ 2.5C
C ≧ 30pF ： Q ≧ 350 （ C ： Nominal capacitance ）
Insulation resistance: 1000 M Ω min.
Appearance: No abnormality
Capacitance change: Within ± 3% or ± 0.3pF, whichever is larger.
Insulation resistance: 1000 M Ω min.
High Permittivity （ Class 2 ） Note 1
【 Test Methods and Remarks 】
Class 1
Appearance: No abnormality
Capacitance change: Within ± 12.5% （ BJ, B7, C6, C7 ）
Within ± 30% （ F ）
（
Dissipation factor ： 5.0% max. BJ, B7, C6, C7 ）
11.0% max. （ F ）
Insulation resistance: 50 M Ωμ F or 1000 M Ω , whichever is smaller.
Class 2
Standard
High Frequency Type
BJ, F
C6
B7, C7
Preconditioning
Temperature
Duration
Applied voltage
Charge/discharge current
Recovery
None
125 ± 3 ℃
1000 ＋ 48/ ー 0 hrs
Rated voltage × 2
50mA max.
6 to 24hr （ Standard condition ） Note 5
Preconditioning
Temperature
Duration
Applied voltage
Charge/discharge current
Recovery
Voltage treatment （ Twice the rated voltage shall be
applied for 1 hour at 85 ℃ , 105 ℃ or 125 ℃） Note 3, 4
85 ± 2 ℃ 105 ± 3 ℃ 125 ± 3 ℃
1000 ＋ 48/ ー 0 hrs
Rated voltage × 2 Note 4
50mA max.
24 ± 2 hrs （ Standard condition ） Note 5
Note 1
Note 2
Note 3
Note 4
Note 5
The ?gures indicate typical speci?cations. Please refer to individual speci?cations in detail.
Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150 ＋ 0/ － 10 ℃ for an hour and kept at room temperature for 24 ± 2hours.
Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage speci?ed in the test conditions, and
kept at room temperature for 24 ± 2hours.
150% of rated voltage is applicable to some items. Please refer to their speci?cations for further information.
Standard condition: Temperature: 5 to 35 ℃ , Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condi-
tion.
Temperature: 20 ± 2 ℃ , Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise speci?ed, all the tests are conducted under the "standard condition".
＊ This catalog contains the typical speci ?cation only due to the limitation of space. When you consider the purchase of our products, please check our speci ?cation.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc_reli_e-01
12
mlcc_reli-R4
相关PDF资料 |
PDF描述 |
|---|---|
| 3361P-1-202G | TRIMMER 2K OHM 0.5W SMD |
| LD6806F/36P,115 | IC REG LDO 200MA 3.6V 6XSON |
| LD6806F/33P,115 | IC REG LDO 200MA 3.3V 6XSON |
| 3361P-1-102G | TRIMMER 1K OHM 0.5W SMD |
| LD6806F/30P,115 | IC REG LDO 200MA 3.0V 6XSON |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7846BPZ | 功能描述:IC DAC 16BIT LC2MOS VOUT 28PLCC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:1 系列:- 设置时间:4.5µs 位数:12 数据接口:串行，SPI? 转换器数目:1 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOICN 包装:剪切带 (CT) 输出数目和类型:1 电压，单极；1 电压，双极 采样率（每秒）:* 其它名称:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND |
| AD7846BQ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:16-Bit Digital-to-Analog Converter |
| AD7846JN | 功能描述:IC DAC 16BIT LC2MOS VOUT 28-DIP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1,000 系列:- 设置时间:1µs 位数:8 数据接口:串行 转换器数目:8 电压电源:双 ± 功率耗散（最大）:941mW 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC W 包装:带卷 (TR) 输出数目和类型:8 电压，单极 采样率（每秒）:* |
| AD7846JNZ | 功能描述:IC DAC 16BIT LC2MOS VOUT 28-DIP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:1 系列:- 设置时间:4.5µs 位数:12 数据接口:串行，SPI? 转换器数目:1 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SOICN 包装:剪切带 (CT) 输出数目和类型:1 电压，单极；1 电压，双极 采样率（每秒）:* 其它名称:MCP4921T-E/SNCTMCP4921T-E/SNRCTMCP4921T-E/SNRCT-ND |
| AD7846JNZ | 制造商:Analog Devices 功能描述:IC 12-BIT DAC |
发布紧急采购，3分钟左右您将得到回复。