- 您现在的位置：买卖IC网 > PDF目录20264 > T95R336M035EZSL (Vishay Sprague)CAP TANT 33UF 35V 20% 2824 PDF资料下载
参数资料
| 型号： | T95R336M035EZSL |
| 厂商： | Vishay Sprague |
| 文件页数： | 9/21页 |
| 文件大小： | 0K |
| 描述： | CAP TANT 33UF 35V 20% 2824 |
| 标准包装： | 600 |
| 系列： | TANTAMOUNT® T95 |
| 电容： | 33µF |
| 电压 - 额定： | 35V |
| 容差： | ±20% |
| ESR（等效串联电阻）： | 200 毫欧 |
| 类型： | 保形涂层 |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 2824（7260 公制） |
| 尺寸/尺寸： | 0.283" L x 0.236" W（7.20mm x 6.00mm） |
| 高度 - 座高（最大）： | 0.150"（3.80mm） |
| 制造商尺寸代码： | R |
| 特点： | COTS（高可靠性） |
| 包装： | 带卷 (TR) |
Typical Performance Characteristics
www.vishay.com
CAPACITOR ENVIRONMENTAL CHARACTERISTICS
Vishay Sprague
ITEM
CONDITION
ENVIRONMENTAL CHARACTERISTICS
Humidity tests
At 40 °C/90 % RH 1000 h, no voltage applied. ?
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Not to exceed 150 % of initial ?
+25 °C requirement
Temperature cycles
Moisture resistance
Thermal shock
At -55 °C/+125 °C, 30 min each, for 5 cycles.
MIL-STD-202, method 106 at rated voltage,
42 cycles.
Capacitors are subjected to 5 cycles of the
following: ?
-55 °C (+0 °C, -5 °C) for 30 min, then ?
+25 °C (+10 °C, -5 °C) for 5 min, then ?
+125 °C (+3 °C, -0 °C) for 30 min, then ?
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor ?
Leakage current
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor ?
Leakage current
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor ?
Leakage current
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Initial specified value or less ?
Initial specified value or less
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Initial specified value or less ?
Initial specified value or less
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Initial specified value or less ?
Initial specified value or less
+25 °C (+10 °C, -5 °C) for 5 min
MECHANICAL PERFORMANCE CHARACTERISTICS
TEST CONDITION
CONDITION
POST TEST PERFORMANCE
Shear test
Apply a pressure load of 5 N for 10 s ± 1 s
horizontally to the center of capacitor side body.
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Substrate bend
Vibration
With parts soldered onto substrate test board,
apply force to the test board for a deflection
of 3 mm, for a total of 3 bends at a rate of 1 mm/s.
MIL-STD-202, method 204, condition D, 10 Hz to
2000 Hz, 20 g peak
Capacitance change ?
Dissipation factor ?
Leakage current
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Shock
MIL-STD-202, method 213B shock (specified
pulse), condition I, 100 g peak
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Resistance to solder heat
? Recommended reflow profiles temperatures
and durations are located within the Capacitor
Series Guides
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
? Pb-free and lead-bearing series caps are
backward and forward compatible
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Solderability
MIL-STD-2002, method 208, ANSI/J-STD-002,
test B. Applies only to solder and tin plated
terminations. ?
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
Does not apply to gold terminations.
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Resistance to solvents
MIL-STD-202, method 215
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Flammability
Encapsulent materials meet UL 94 V-0 with an
oxygen index of 32 %.
Revision: 03-Feb-14
3
Document Number: 40088
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
相关PDF资料 |
PDF描述 |
|---|---|
| MC78L12ABPRPG | IC REG LDO 12V .1A TO-92 |
| V375A5C300BL2 | CONVERTER MOD DC/DC 5V 300W |
| GCC13DCAI | CONN EDGECARD 26POS R/A .100 SLD |
| EMA44DRMT | CONN EDGECARD 88POS .125 SQ WW |
| V375A5C300B3 | CONVERTER MOD DC/DC 5V 300W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7863ARZ-10REEL1 | 制造商:AD 制造商全称:Analog Devices 功能描述:Simultaneous Sampling Dual 175 kSPS 14-Bit ADC |
| AD7863ARZ-10REEL7 | 功能描述:IC ADC 14BIT DUAL 2CHAN 28SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| AD7863ARZ-10REEL71 | 制造商:AD 制造商全称:Analog Devices 功能描述:Simultaneous Sampling Dual 175 kSPS 14-Bit ADC |
| AD7863ARZ-2 | 功能描述:IC ADC 14BIT DUAL 2CHAN 28SOIC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
| AD7863ARZ-21 | 制造商:AD 制造商全称:Analog Devices 功能描述:Simultaneous Sampling Dual 175 kSPS 14-Bit ADC |
发布紧急采购，3分钟左右您将得到回复。