参数资料
型号: AD7922ARMZ-REEL
厂商: Analog Devices Inc
文件页数: 1/32页
文件大小: 0K
描述: IC ADC DUAL 12BIT 2CH 8MSOP
标准包装: 3,000
位数: 12
采样率(每秒): 1M
数据接口: DSP,MICROWIRE?,QSPI?,串行,SPI?
转换器数目: 1
功率耗散(最大): 20mW
电压电源: 单电源
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 8-TSSOP,8-MSOP(0.118",3.00mm 宽)
供应商设备封装: 8-MSOP
包装: 带卷 (TR)
输入数目和类型: 2 个单端,单极
配用: EVAL-AD7922CBZ-ND - BOARD EVAL FOR AD7922
2-Channel, 2.35 V to 5.25 V,
1 MSPS, 10-/12-Bit ADCs
AD7912/AD7922
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
2004 Analog Devices, Inc. All rights reserved.
FEATURES
Fast throughput rate: 1 MSPS
Specified for VDD of 2.35 V to 5.25 V
Low power:
4.8 mW typ at 1 MSPS with 3 V supplies
15.5mW typ at 1 MSPS with 5 V supplies
Wide input bandwidth:
71 dB minimum SNR at 100 kHz input frequency
Flexible power/serial clock speed management
No pipeline delays
High speed serial interface:
SPI/QSPI/MICROWIRE/DSP compatible
Standby mode: 1 A maximum
Daisy-chain mode
8-lead TSOT package
8-lead MSOP package
APPLICATIONS
Battery-powered systems:
Personal digital assistants
Medical instruments
Mobile communications
Instrumentation and control systems
Data acquisition systems
High speed modems
Optical sensors
GENERAL DESCRIPTION
The AD7912/AD79221 are 10-bit and 12-bit, high speed, low
power, 2-channel successive approximation ADCs, respectively.
The parts operate from a single 2.35 V to 5.25 V power supply
and feature throughput rates of up to 1 MSPS. The parts contain
a low noise, wide bandwidth track-and-hold amplifier, which
can handle input frequencies in excess of 6 MHz.
The conversion process and data acquisition are controlled
using CS and the serial clock, allowing the devices to interface
with microprocessors or DSPs. The conversion rate is
determined by the SCLK signal. The input signal is sampled on
the falling edge of CS and the conversion is also initiated at this
point. The channel to be converted is selected through the DIN
pin, and the mode of operation is controlled by CS. The serial
data stream from the DOUT pin has a channel identifier bit and
mode identifier bit, which provide information about the
converted channel and the current mode of operation.
FUNCTIONAL BLOCK DIAGRAM
04351-0-001
T/H
CONTROL LOGIC
10-/12-BIT
SUCCESSIVE
APPROXIMATION
ADC
GND
VDD
AD7912/AD7922
VIN0
VIN1
SCLK
DOUT
CS
DIN
MUX
Figure 1.
Several AD7912/AD7922 can be connected together in a daisy
chain. The AD7912/AD7922 feature a daisy-chain mode that
allows the user to read the conversion results from the ADCs
contained in the chain. The AD7912/AD7922 use advanced
design techniques to achieve very low power dissipation at high
throughput rates. The reference for the part is taken internally
from VDD, thereby allowing the widest dynamic input range to
the ADC.
PRODUCT HIGHLIGHTS
1. 2-channel, 1 MSPS, 10-/12-bit ADCs in TSOT package.
2. High throughput with low power consumption.
3. Flexible power/serial clock speed management.
The conversion rate is determined by the serial clock. The
parts also feature a power-down mode to maximize power
efficiency at lower throughput rates. Average power
consumption is reduced when the power-down mode is
used while not converting. Current consumption is 1 A
maximum and 50 nA typically when in power-down mode.
4. Daisy-chain mode.
5. No pipeline delay.
The parts feature a standard successive approximation ADC
with accurate control of the sampling instant via a CS input
and once-off conversion control.
1 Protected by U.S. Patent Number 6,681,332.
相关PDF资料
PDF描述
D38999/20WE6PNLC CONN HSG RCPT 6POS WALL MT PINS
MS27473T14B35SA CONN PLUG 37POS STRAIGHT W/SCKT
D38999/20WJ11SNLC CONN HSG RCPT 11POS WALL MT SCKT
MS27484T16A26P CONN PLUG 26POS STRAIGHT W/PINS
MS27466T17B55P CONN RCPT 55POS WALL MT W/PINS
相关代理商/技术参数
参数描述
AD7922ARMZ-REEL7 功能描述:IC ADC DUAL 12BIT 2CH 8MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率(每秒):45k 数据接口:串行 转换器数目:2 功率耗散(最大):315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC(0.295",7.50mm 宽) 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端,单极
AD7922AUJ-R2 制造商:Rochester Electronics LLC 功能描述:DUAL 12-BIT, 1MSPS, ADC I.C - Bulk
AD7922AUJ-REEL 制造商:Analog Devices 功能描述:ADC Single SAR 1Msps 12-bit Serial 8-Pin TSOT T/R
AD7922AUJ-REEL7 制造商:Analog Devices 功能描述:ADC Single SAR 1Msps 12-bit Serial 8-Pin TSOT T/R 制造商:Rochester Electronics LLC 功能描述:DUAL 12-BIT, 1MSPS, ADC I.C - Tape and Reel
AD7922AUJZ-REEL7 功能描述:IC ADC DUAL 12BIT 2CH TSOT-23-8 RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 其它有关文件:TSA1204 View All Specifications 标准包装:1 系列:- 位数:12 采样率(每秒):20M 数据接口:并联 转换器数目:2 功率耗散(最大):155mW 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-TQFP 供应商设备封装:48-TQFP(7x7) 包装:Digi-Reel® 输入数目和类型:4 个单端,单极;2 个差分,单极 产品目录页面:1156 (CN2011-ZH PDF) 其它名称:497-5435-6