参数资料
| 型号： | AXN360C238S |
| 厂商： | Panasonic Electric Works |
| 文件页数： | 12/13页 |
| 文件大小： | 0K |
| 描述： | CONN SOCKET .8MM 60POS SMD |
| 其它有关文件： | Connectors SMD-Technical Info |
| 标准包装： | 15 |
| 系列： | P8 |
| 连接器类型： | 插口，中央触点带 |
| 位置数： | 60 |
| 间距： | 0.031"（0.80mm） |
| 行数： | 2 |
| 安装类型： | 表面贴装 |
| 特点： | 板导轨 |
| 触点表面涂层： | 金 |
| 包装： | 管件 |
| 配接层叠高度： | 3.5mm，4.5mm，5.5mm |
| 板上方高度： | 0.205"（5.20mm） |
| 配套产品： | AXN460C530S-ND - CONN HEADER .8MM 60POS SMD AXN460C530P-ND - CONN HEADER .8MM 60POS SMD AXN460C430S-ND - CONN HEADER .8MM 60POS SMD AXN460C430P-ND - CONN HEADER .8MM 60POS SMD AXN460C330S-ND - CONN HEADER .8MM 60POS SMD AXN460C330P-ND - CONN HEADER .8MM 60POS SMD AXN460C330J-ND - CONN HEADER .8MM 60POS SMD AXN460C040P-ND - CONN HEADER .8MM 60POS SMD AXN460C030S-ND - CONN HEADER .8MM 60POS SMD AXN460530S-ND - CONN HEADER .8MM 60POS SMD 更多... |
Notes on Using Narrow pitch Connectors
Handling Single Components
1) Make sure not to drop or allow parts to
fall from work bench
2) Excessive force applied to the
terminals could cause warping, come
out, or weaken the adhesive strength of
the solder. Handle with care.
3) Repeated bending of the terminals
may cause terminals to break.
Cleaning ?ux from PC board
1) To increase the cleanliness of the
cleaning ?uid and cleaning operations,
prepare equipment for cleaning process
beginning with boil cleaning, ultrasonic
cleaning, and then vapor cleaning.
2) Carefully oversee the cleanliness of
the cleaning ?uids to make sure that the
contact surfaces do not become dirty
from the cleaning ?uid itself.
Storage of connectors
1) To prevent problems from voids or air
pockets due to heat of re?ow soldering,
avoid storing the connectors in areas of
high humidity. When storing the
connectors for more than six months, be
sure to consider storage area where the
humidity is properly controlled.
2) Depending on the connector type, the
color of the connector may vary from
connector to connector depending on
when it is produced.
Other Notes
1) These products are made for the
design of compact and lightweight
devices and therefore the thickness of the
molded components has been made very
thin. Therefore, be careful during
insertion and removal operations for
excessive forces applied may damage
the products.
2) Dropping of the products or rough
mishandling may bend or damage the
terminals and possibly hinder proper
re?ow soldering.
4) Do not insert or remove the connector
when it is not soldered. Forcibly applied
external pressure on the terminals can
weaken the adherence of the terminals to
the molded part or cause the terminals to
lose their evenness.
5) Excessive prying-force applied to one
end may cause product breakage and
separation of the solder joints at the
terminal.
3) Since some powerful cleaning
solutions may dissolve molded
components of the connector and wipe
off or discolor printed letters, we
recommend aqua pura electronic parts
cleaners. Please consult us if you wish to
use other types of cleaning ?uids.
4) Please note that the surfaces of
molded parts may whiten when cleaned
with alcohol.
Some connectors may change color
slightly if subjected to ultraviolet rays
during storage. This is normal and will not
affect the operation of the connector.
3) When storing the connectors with the
PC boards assembled and components
alreeady set, be careful not to stack them
up so the connectors are subjected to
excessive forces.
3) Before soldering, try not to insert or
remove the connector more than
absolutely necessary.
4) When coating the PC board after
soldering the connector to prevent the
deterioration of insulation, perform the
coating in such a way so that the coating
does not get on the connector.
5) There may be variations in the colors
of products from different production lots.
This is normal.
Excessive force applied for insertion in a
pivot action as shown may also cause
product breakage.
Align the header and socket positions
before connecting them.
Handling the PC board
? Handling the PC board after
mounting the connector
When cutting or bending the PC board
after mounting the connector, be careful
that the soldered sections are subjected
to excessive force.
The soldered areas should not be subjected to force.
4) Avoid storing the connectors in
locations with excessive dust. The dust
may accumulate and cause improper
connections at the contact surfaces.
6) The connectors are not meant to be
used for switching.
7) Be sure not to allow external pressure
to act on connectors when assembling
PCBs or moving in block assemblies.
ACCTB48E 201303-T
Panasonic Corporation
Automation Controls Business Division
industrial.panasonic.com/ac/e/
相关PDF资料 |
PDF描述 |
|---|---|
| AXN360C130S | CONN SOCKET .8MM 60POS SMD |
| AXN360C038S | CONN SOCKET .8MM 60POS SMD |
| 4310R-101-181LF | RES ARRAY 180 OHM 9 RES 10-SIP |
| AXN360238S | CONN SOCKET .8MM 60POS SMD |
| AXN360130S | CONN SOCKET .8MM 60POS SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD8190ACPZ-R7 | 功能描述:IC SW HDMI/DVI 2:1 EQUAL 56LFCSP RoHS:是 类别:集成电路 (IC) >> 专用 IC 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
| AD8190-EVAL | 制造商:Analog Devices 功能描述:EVAL BD FOR AD8190 ,2:1 HDMI/DVI SWIT W/ EQUALIZATION - Bulk |
| AD8191 | 制造商:Analog Devices 功能描述:- Bulk |
| AD8191A | 制造商:AD 制造商全称:Analog Devices 功能描述:4:1 HDMI/DVI Switch with Equalization |
| AD8191AASTZ | 功能描述:IC HDMI/DVI SWITCH 4:1 100LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:- 其它有关文件:STG4159 View All Specifications 标准包装:5,000 系列:- 功能:开关 电路:1 x SPDT 导通状态电阻:300 毫欧 电压电源:双电源 电压 - 电源，单路/双路(±):±1.65 V ~ 4.8 V 电流 - 电源:50nA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:7-WFBGA，FCBGA 供应商设备封装:7-覆晶 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。