Shield Bonding Products
Scotchlok? 4460 Shield Bond Connector
(No Tabbing Required)
The 4460 Shield Bond Connector is designed to make a stable, low-resistance
electrical connection between the shield of a communications cable and a
conductor such as a strap, bar, or wire. The connector consists of four parts: lower
member (base), upper member (top), and two securing nuts (lock nuts). The base
teeth are set at such an angle as to permit easy insertion under the cable shield.
Top and base members are made of tin-plated tempered brass, slightly curved to
307
exert a continuous spring force on sheath and shield after clamping.
Scotchlok 4460-S Shield Bond Connector
The 4460-S Shield Bond Connector is designed to make a stable, low-resistance
electrical connection between the shield of a communications cable and a
conductor such as a strap, bar, or wire. The connector consists of ?ve parts: lower
member (base), upper member (top), two securing nuts (lock nuts) and a plastic
shoe to aid connector insertion and to protect conductors. The base teeth are set
at such an angle as to permit easy insertion under the cable shield. Top and base
members are made of tin-plated tempered brass, slightly curved to exert a
continuous spring force on sheath and shield after clamping.
308
Scotchlok 4460-D Shield Bond Connector
The 4460-D Shield Bond Connector is a downsized version of the 4460 Shield
Bond Connector. Its small size makes it an excellent choice for cables of 100-pair
or less. Its current-carrying capacity is equal to or better than aluminum-shielded
cables of 100-pair or less and can be used on all cable with 20.3 mm (0.8") or
smaller O.D.
309
Scotchlok 4460-D/FO Shield Bond Connector
Assembly
The 4460-D/FO Shield Bond Connector is speci?cally designed to meet the
bonding needs of ?ber optic cables that contain metallic or ?berglass strength
members. The connector is a version of the 4460-D Connector Assembly which
utilizes two additional plates to capture and secure the strength members. Its
current-carrying capacity is equal to or better than aluminum-shielded ?ber
optic cable and can be used on all cables with 20.3 mm (0.8") or smaller O.D.
310
Scotchlok 4462 Shield Bond Connector (Designed
Speci?cally For C.A.C.S.P. Cable)
The 4462 Shield Bond Connector is designed to make a stable, low resistance
electrical connection between the shield of a communications cable and a
conductor such as a strap, bar, wire or braid.
Scotchlok 4462-FN Shield Bond Connector
Includes ?anged nuts.
311
Closures
Fiber Protection
pg. 113
pg. 236
