ESD High Temp Polymide Tape
Used in applications masking PCB gold features for wave
soldering and IR reflow ovens
? Removal leaves little or no residue
? Static charge generation during unwind and peel off stainless
steel plate application is 5 volts @ 50% RH
? 1.0 mil thick (0.001" or 0.0254 mm) Polyimide Film (DuPont Kapton ?
or equivalent)
? 1.4 mil thick (0.0014" or 0.0356 mm) conductive polysiloxide adhesive
? Adhesive surface resistivity 10E3 to 10E4 ohms
? Max Temperature 260°C (500°F)
? For best results, apply to board using a rubber roller
Tape is wound on a plastic core.
Width
Tape
0.25"
0.5"
0.75"
1"
Core
Length
Wescorp Tape Storage and Limited Warranty:
The user must determine the suitability for use of an antistatic tape for his particular
ESD High Temp Polyimide
3"
36 yd
application. For best results, tape inventory should be continually replenished. It
is recommended that rolls of tape be stored flat and rotated (flipped over to the
other side) periodically. Tapes should be stored in a dry, well ventilated room with a
Width tolerance ±1/32"
reasonably consistent temperature of 68°F (20°C) and be protected from exposure
to direct sunlight. Tape should not be stored in ultraviolet sunlight, moisture,
or heat.Tape over one year old should be evaluated by the user to determine
acceptability for the user’s application. Protektive Pak recommends those tracking
useful life of product to use shipping/invoice date as Protektive Pak expressly
warrants that for a period of one (1) year from the date of purchase, our Wescorp
Brand Antistatic Tape will be free of defects in material (parts) and workmanship
Tape widths are nominal
metric ±0.8 mm (±1/32").
1/4” is 6 mm nominal or 0.236"
1/2” is 12 mm nominal or 0.472"
3/4” is 18 mm nominal or 0.709"
RoHS Compliance Statement
None of the following materials are
intentionally added in manufacturing this
product: lead, mercury, cadmium,
hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1. See
1”
is
24 mm
nominal
or
0.945"
Desco Industries Inc. letter on-line at
Specifications and procedures subject to change without notice.
*Wescorp is a Desco Industries brand.
WESCORP* ESD HIGH TEMP POLYIMIDE TAPE, PLASTIC CORE
? 2012 DESCO INDUSTRIES INC.
Employee Owned
PROTEKTIVE PAK
13520 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE (909) 627-2578, FAX (909) 363-7331
ProtektivePak.com
DRAWING NUMBER
47026
DATE:
March
2012
