Antistatic Cellulose Tape
For general purpose applications
? 2.4 mil (0.06 mm) total thickness
? Cellulose film resistance 10E10 - 10E11 ohms
? Rubber based adhesive absorbs moisture
? Adhesive surface resistance 10E10 - 10E11 ohms
? Temperature Range -10°C - 71°C (14°F - 160°F);
meets MIL-B-81705 of 100°C for 10 min max
? Available in clear, clear with ESD symbols, and
clear with ESD symbols with yellow stripe. Marking
Antistatic Tape
Imprint on Clear Cellulose
with Symbols
Antistatic Tape
Imprint on Clear Cellulose
w/Symbols w/Yellow Stripe
is approved symbols of Mil STD-1285* and ESD
Association.
Symbols printed in between film and adhesive; will not rub off.
46911
46915
Width
Tape
Antistatic Clear Cellulose
Antistatic Clear Cellulose
with Symbols
0.5"
46900
46903
46909
.75"
46901
46904
46910
1"
46902
46905
46911
2"
46906
46912
Core
1"
3"
3"
Length
36 yds
72 yds
72 yds
46900
Tape is wound on a low-
sloughing plastic core.
Antistatic Clear Cellulose
w/Symbols w/Yellow Stripe 46913
46914
46915
46916 3" 72 yds
Width tolerance ±1/32"
The user must determine the suitability
for use of an antistatic tape for his
particular application.
Note: For best results, tape inventory should be continually replenished. It is
recommended that rolls of tape be stored flat and rotated (flipped over to the
other side) periodically. Tapes should be stored in a dry, well ventilated room
Tape widths are nominal
metric ±0.8 mm (±1/32").
1/4" is 6 mm nominal or 0.236"
1/2" is 12 mm nominal or 0.472"
3/4" is 18 mm nominal or 0.709"
1" is 24 mm nominal or 0.945"
2" is 48 mm nominal or 1.890"
No sulfur, surfactants or
silicone based material
(adhesive, film backing,
release material) is
used in the manufacture
of our cellulose tape.
RoHS Compliance Statement
None of the following materials are
intentionally added in manufacturing
this product: lead, mercury, cadmium,
hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1.
See Protektive Pak Inc. letter on-line at
ProtektivePak.com .
with a reasonably consistent temperature of 68°F (20°C) and be protected
from exposure to direct sunlight. Tape should not be stored in ultraviolet
sunlight, moisture, or heat. See Limited Warranty; Protektive Pak expressly
warrants that for a period of one (1) year from the date of purchase, our
Wescorp Brand Antistatic Tape will be free of defects in material (parts) and
workmanship (labor). Tape over one year old should be evaluated by the user
to determine acceptability for the user's application.
*Military organizations sometimes use MIL-STD-1285 for hardware marking and that
document once required the use of the "three arrows in a circle" symbol. That symbol
has been changed for consistency with industry marking to the "hand in triangle" ESD
Susceptibility symbol. (Ref: TR20.20 section 5.3.14.1)
*Wescorp is a Desco Industries brand.
WESCORP* ANTISTATIC CELLULOSE TAPE
? 2007 DESCO INDUSTRIES INC.
Employee Owned
PROTEKTIVE PAK
13520 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE (909) 627-2578, FAX (909) 363-7331
www.protektivepak.com
DRAWING NUMBER
46900
DATE:
6/07
