Product Data Sheet
3M Moisture Barrier Bag Dri-Shield 2000
3M Moisture Barrier Bag Dri-Shield 3000
Product Data Sheet
This foil moisture barrier bag is designed to provide a static safe environment for
sensitive electronic devices. A nylon layer helps to strengthen the bag. The bags are
heat sealable and suitable for vacuum packaging. Bags are printed with ESD and
moisture warning symbols, and a lot code for traceability.
3M Moisture Barrier Bags Dri-Shield 3000 are manufactured from a laminate of nylon,
foil, and polyethylene. The metal layer is intended to provide shielding of Electrostatic
Discharge (ESD) and to help minimize the penetration of electric field.
These bags are tested to meet or exceed certain electrical and physical requirements
of Moisture Barrier Bags, ANSI/ESD S541, and to be ANSI/ESD S20.20 program
compliant. Bags are RoHS Compliant* and lead-free**.
Physical
Typical Value
Testing Method
Moisture Vapor
Transmission Rate
(MVTR)
< 0.0003 grams/100 sq. in./24
hrs.
ASTM F1249
Tensile Strength
3800 PSI, 26 MPa
ASTM D882
Puncture Resistance
16 lbs, 71 N
MIL-STD-3010C Method 2065
Seal Strength
15 lbs, 66 N
ASTM D882
Thickness
6 mils, .1524 mm +/-15%
MIL-STD-3010C Method 1003
Marking Adhesion
Pass
IPC-TM-650 2.4.1
Electrical
Typical Value
Testing Method
ESD Shielding
<10 nJ
ANSI/ESD STM11.31
Surface Resistance -
Interior
<1x1011 ohms
ANSI/ESD STM11.11
Surface Resistance -
Exterior
<1x1011 ohms
ANSI/ESD STM11.11
Static Decay
< 2 seconds
ETS 406D
EMI Attenuation
45 dB
1 to 10 GHz
Cleanliness
Typical Value
Testing Method
Silicone
Not Detected
FTIR
Heat Sealing Conditions
Typical Value
Temperature
400°F, 204°C
Time
0.6 – 4.5 seconds
Pressure
30 – 70 PSI, 206 – 482 KPa
This product is intended for commercial use only. This product is not on the Qualified
Product Listing under the Defense Standardization Program.
3M Moisture Barrier Bag
Dri-Shield 3000
