3M Toe Grounder
Toe Grounder
p
r
o
d
u
c
t
d
a
t
a
s
h
e
t
Toe grounder
item number
see above
1130-a
datasheet
product
Toe Grounder
Standards
Meets the requirements of AnSI/eSd S-20.20, eIA 625, MIL-STd-1686, and MIL-HdBK-263.
Fits high heels and shoes when heel grounders won’t. Made in the uSA, this quality grounder features a
durable three layer sole, lot number, and 12 inch multi-strand ribbon.
3M uses time-tested construction tech-
niques including computer controlled stitching, riveting, die cutting, and heat cutting to ensure consistent
performance.
Specifications
resistor:
1 megohm
Color:
Black
ribbon:
Multi-strand, carbon suffused nylon on polyester,
sewn in sinusoidal pattern to provide side to side
conductivity.
Hook and Loop: 3/4” Black
elastic Strap
3/4” Black
Sole exterior:
<105 ohms
Part Numbers
Tg1M
Toe grounder, 1 meg resistor
See 3M Data Sheets for these
related items:
3M Foot grounder Tester
3M Floor Mats
How Foot Grounders Work
Foot grounders discharge static from a person to ground by connect-
ing the person to a grounded walking surface. A conductive ribbon
placed inside the wearer’s shoe or sock makes electrical contact with
the skin through perspiration. The ribbon is joined to a resistor which
limits current should accidental exposure to electricity occur. The other
end of the resistor is joined to a conductive sole. This sole contacts a
grounded eSd floor mat or eSd flooring system. Foot grounders must
be worn on both feet to maintain ground contact while walking.
Back View
Front View
3 layer sole for durability.
12” conductive
ribbon.
Adjustable nylon strap
1 megohm resistor
3M Electronic Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
uS and Canada: 866-722-3736
Fax: 866-722-3735
Intl: 919-718-0000
; Fax: 919-774-8174
email: 3Mstaticinfo@mmm.com
; www.3M.com/static
2008
3M is a trademark of 3M Company.
All other trademarks herein are the property
of their respective owners.