Product Data Sheet
3M Metal-Out Static Shielding Bag 1500
Product Data Sheet
3M Metal-Out Static
Shielding Bag1500
Physical
Typical Value
Testing Method
Tensile Strength
4900 PSI, 34 MPa
ASTM D882
Puncture Resistance
10 lbs, 44 N
MIL-STD-3010C Method 2065
Seal Strength
14 lbs, 62 N
ASTM D882
Thickness
3 mils, .0762 mm +/-15%
MIL-STD-3010C Method 1003
Marking Adhesion
Pass
IPC-TM-650 2.4.1
Transparency
40%
Tobias
Electrical
Typical Value
Testing Method
ESD Shielding
<10 nJ
ANSI/ESD STM11.31
Surface Resistance -
Interior
<1x1011 ohms
ANSI/ESD STM11.11
Surface Resistance -
Exterior
<1x106 ohms
ANSI/ESD STM11.11
Static Decay
< 2 seconds
ETS 406D
Charge Retention
<100 volts
CPM-3M TP.21XX
Heat Sealing Conditions
Typical Value
Temperature
300F – 375°F, 149C – 190°C
Time
0.5 – 3.5 seconds
Pressure
30 – 70 PSI, 206 – 482 KPa
Cleanliness
Typical Value
Testing Method
Silicone
Not Detected
FTIR
This transparent metal-out static shielding bag is designed to provide a static safe
environment for sensitive electronic devices. Bags are printed with an ESD warning
symbol and a lot code for traceability. Open top and ZipTop styles are available. The
bags are heat sealable.
3M Static Shielding Bags are manufactured from a top coat, metal, polyester,
polyethylene laminate. The proprietary top coating is designed to protect the metal
layer. Polyester dielectric, in concert with the metal layer, is intended to provide
shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of
electric field.
These bags are tested to meet or exceed certain electrical and physical requirements
of ANSI/ESD S541 and to be ANSI/ESD S20.20 program compliant. Bags are RoHS
Compliant* and lead-free**.
This product is intended for commercial use only. This product is not on the Qualified Product Listing
under the Defense Standardization Progam.
