参数资料
型号: B25834D4476K4
厂商: EPCOS Inc
文件页数: 11/12页
文件大小: 0K
描述: MKV CAPACITOR 47UF 600V
标准包装: 5
系列: B25834
电容: 47µF
额定电压 - AC: 600V
电介质材料: 聚丙烯,金属化
容差: ±10%
工作温度: -25°C ~ 85°C
安装类型: 底座安装
封装/外壳: 径向,Can
尺寸/尺寸: 3.516" 直径(89.30mm)
高度 - 座高(最大): 4.094"(104.00mm)
端子: 螺钉端子
引线间隔: 1.378"(35.00mm)
特点: 通用
应用: *
包装: 散装
其它名称: B25834D4476K 4
B25834D4476K004
MKV AC Capacitors
B25834
Damping, Commutating
Cautions and warnings
Safety
■ In case of dents of more than 1 mm depth or any other mechanical damage, capacitors must not
be used at all. This applies also in cases of oil leakage.
■ Electrical or mechanical misapplication of capacitors may be hazardous. Personal injury or prop-
erty damage may result from bursting of the capacitor or from expulsion of oil or melted material
due to mechanical disruption of the capacitor.
Ensure good, effective grounding for capacitor enclosures.
Observe appropriate safety precautions during operation (self-recharging phenomena and the
high energy contained in capacitors).
Handle capacitors carefully, because they may still be charged even after disconnection.
The terminals of capacitors, connected bus bars and cables as well as other devices may also
be energized.
Follow good engineering practice.
Failure to follow cautions may result, worst case, in premature failures, bursting and fire.
Thermal load
After installation of the capacitor it is necessary to verify that maximum hot-spot temperature is not
exceeded at extreme service conditions (see www.epcos.com/thermal_design).
Mechanical protection
The capacitor has to be installed in a way that mechanical damages and dents in the aluminum can
are avoided.
Storage and Operating Conditions
Do not use or store capacitors in corrosive atmosphere especially where chloride gas, sulfide gas,
acid, alkali, salt or the like are present. In dusty environments, regular maintenance and cleaning
especially of the terminals is required to avoid conductive path between phases and/or phases and
ground.
Overpressure disconnector
To ensure full functionality of an overpressure disconnector, the following must be observed:
■ The elastic elements must not be hindered, i.e.
– connecting lines must be flexible leads (cables),
– there must be sufficient space (minimum 12 mm) above the connections for expansion of the
overpressure disconnector,
– folding crimps must not be retained by clamps.
■ Stress parameters of the capacitor must be within the IEC61071 specification.
Service life expectancy
Electrical components do not have an unlimited service life expectancy; this applies to self-healing
capacitors too. The maximum service life expectancy may vary depending on the application the
capacitor is used in.
11
09/05
相关PDF资料
PDF描述
D225K1K0E RESISTOR POWER ADJ 1.0K OHM 225W
DA22.1121.11 DA22 POWER ENTRY MOD W/FLTR 1A
DA22.9111.11 POWER ENTRY MOD W/FLTR 10A
D100K10R RESISTOR POWER ADJ 10 OHM 100W
B25834D3686K4 MKV CAPACITOR 68UF 500V
相关代理商/技术参数
参数描述
CS4382A-DQZR 功能描述:音频数/模转换器 IC IC 114dB 192 kHz 8Chn DAC w/DSD supt. RoHS:否 制造商:Texas Instruments 转换器数量: 分辨率:16 bit 接口类型:I2S, UBS 转换速率: 信噪比:98 dB 工作电源电压:5 V DAC 输出端数量:2 工作温度范围:- 25 C to + 85 C 电源电流:23 mA 安装风格:SMD/SMT 封装 / 箱体:TQFP-32 封装:Reel
CS4382A-EQZ 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:114 dB, 192 kHz 8-channel D/A Converter
CS4382A-EQZR 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:114 dB, 192 kHz 8-channel D/A Converter
CS4382-KQZ 功能描述:数模转换器- DAC IC 114dB 24-bit 102kHz 8Ch DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube
CS4382-KQZR 功能描述:数模转换器- DAC IC 114dB 24-bit 102kHz 8Ch DAC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube