参数资料
型号: CY7C4225-25AC
厂商: CYPRESS SEMICONDUCTOR CORP
元件分类: DRAM
英文描述: 64/256/512/1K/2K/4K x18 Low-Voltage Synchronous FIFOs
中文描述: 1K X 18 OTHER FIFO, 15 ns, PQFP64
封装: 14 X 14 MM, PLASTIC, TQFP-64
文件页数: 1/25页
文件大小: 409K
代理商: CY7C4225-25AC
64, 256, 512, 1K, 2K, 4K x 18 Synchronous FIFOs
fax id: 5410
CY7C4425/4205/4215
CY7C4225/4235/4245
Cypress Semiconductor Corporation
3901 North First Street
San Jose
CA 95134
408-943-2600
April 1995 - Revised August 18, 1997
1CY7C4225
Features
High-speed, low-power, first-in first-out (FIFO)
memories
64 x 18 (CY7C4425)
256 x 18 (CY7C4205)
512 x 18 (CY7C4215)
1K x 18 (CY7C4225)
2K x 18 (CY7C4235)
4K x 18 (CY7C4245)
High-speed 100-MHz operation (10 ns read/write cycle
time)
Low power (I
CC
=45 mA)
Fully asynchronous and simultaneous read and write
operation
Empty, Full, Half Full, and Programmable Almost
Empty/Almost Full status flags
TTL-compatible
Retransmit function
Output Enable (OE) pin
Independent read and write enable pins
Center power and ground for reduced noise
Supports free-running 50% duty cycle clock inputs
Width Expansion Capability
Depth Expansion Capability
Space saving 64-pin 10x10 TQFP, and 14x14 TQFP
68-pin PLCC
Functional Description
T
he CY7C42X5 are high-speed, low-power, first-in first-out
(FIFO) memories with clocked read and write interfaces. All
are 18 bits wide and are pin/functionally compatible to
IDT722x5. The CY7C42X5 can be cascaded to increase FIFO
depth. Programmable features include Almost Full/Almost
Empty flags. These FIFOs provide solutions for a wide variety
of data buffering needs, including high-speed data acquisition,
multiprocessor interfaces, and communications buffering.
These FIFOs have 18-bit input and output ports that are con-
trolled by separate clock and enable signals. The input port is
controlled by a free-running clock (WCLK) and a write enable
pin (WEN).
When WEN is asserted, data is written into the FIFO on the
rising edge of the WCLK signal. While WEN is held active, data
is continually written into the FIFO on each cycle. The output
port is controlled in a similar manner by a free-running read
clock (RCLK) and a read enable pin (REN). In addition, the
CY7C42X5 have an output enable pin (OE). The read and
write clocks may be tied together for single-clock operation or
the two clocks may be run independently for asynchronous
read/write applications. Clock frequencies up to 100 MHz are
achievable.
Retransmit and Synchronous Almost Full/Almost Empty flag
features are available on these devices.
Depth expansion is possible using the cascade input (WXI,
RXI), cascade output (WXO, RXO), and First Load (FL) pins.
The WXO and RXO pins are connected to the WXI and RXI
pins of the next device, and the WXO and RXO pins of the last
device should be connected to the WXI and RXI pins of the
first device. The FL pin of the first device is tied to V
SS
and the
FL pin of all the remaining devices should be tied to V
CC
.
The CY7C42X5 provides five status pins. These pins are de-
coded to determine one of five states: Empty, Almost Empty,
Half Full, Almost Full, and Full (see Table 2). The Half Full flag
shares the WXO pin. This flag is valid in the standalone and
width-expansion configurations. In the depth expansion, this
pin provides the expansion out (WXO) information that is used
to signal the next FIFO when it will be activated.
The Empty and Full flags are synchronous, i.e., they change
state relative to either the read clock (RCLK) or the write clock
(WCLK). When entering or exiting the Empty states, the flag is
updated exclusively by the RCLK. The flag denoting Full states
is updated exclusively by WCLK. The synchronous flag archi-
tecture guarantees that the flags will remain valid from one
clock cycle to the next. As mentioned previously, the Almost
Empty/Almost Full flags become synchronous if the
V
CC
/SMODE is tied to V
SS
. All configurations are fabricated
using an advanced 0.65
μ
N-Well CMOS technology. Input
ESD protection is greater than 2001V, and latch-up is prevent-
ed by the use of guard rings.
相关PDF资料
PDF描述
CY7C4225-25AI 64/256/512/1K/2K/4K x18 Low-Voltage Synchronous FIFOs
CY7C4225-25ASC 64/256/512/1K/2K/4K x18 Low-Voltage Synchronous FIFOs
CY7C4225-25ASI 64/256/512/1K/2K/4K x18 Low-Voltage Synchronous FIFOs
CY7C4225-25JC 64/256/512/1K/2K/4K x18 Low-Voltage Synchronous FIFOs
CY7C4225-25JI 64/256/512/1K/2K/4K x18 Low-Voltage Synchronous FIFOs
相关代理商/技术参数
参数描述
CY7C4225-25JC 制造商:Rochester Electronics LLC 功能描述:- Bulk
CY7C4225V-15ASC 功能描述:IC SYNC FIFO MEM 1KX18 64LQFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:CY7C 标准包装:15 系列:74F 功能:异步 存储容量:256(64 x 4) 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP(0.300",7.62mm) 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433
CY7C4225V-15ASXC 功能描述:先进先出 1K X18 LO VLTG SYNC 先进先出 COM RoHS:否 制造商:IDT 电路数量: 数据总线宽度:18 bit 总线定向:Unidirectional 存储容量:4 Mbit 定时类型:Synchronous 组织:256 K x 18 最大时钟频率:100 MHz 访问时间:10 ns 电源电压-最大:3.6 V 电源电压-最小:6 V 最大工作电流:35 mA 最大工作温度:+ 85 C 封装 / 箱体:TQFP-80 封装:
CY7C4225V-15ASXCT 功能描述:先进先出 1K X18 LO VLTG SYNC 先进先出 COM RoHS:否 制造商:IDT 电路数量: 数据总线宽度:18 bit 总线定向:Unidirectional 存储容量:4 Mbit 定时类型:Synchronous 组织:256 K x 18 最大时钟频率:100 MHz 访问时间:10 ns 电源电压-最大:3.6 V 电源电压-最小:6 V 最大工作电流:35 mA 最大工作温度:+ 85 C 封装 / 箱体:TQFP-80 封装:
CY7C4225V-25ASC 制造商:Cypress Semiconductor 功能描述:FIFO Mem Sync Dual Depth/Width Uni-Dir 1K x 18 64-Pin TQFP