- 您现在的位置：买卖IC网 > PDF目录20225 > T95R686M025HSSL (Vishay Sprague)CAP TANT 68UF 25V 20% 2824 PDF资料下载
参数资料
| 型号： | T95R686M025HSSL |
| 厂商： | Vishay Sprague |
| 文件页数： | 9/21页 |
| 文件大小： | 0K |
| 描述： | CAP TANT 68UF 25V 20% 2824 |
| 标准包装： | 300 |
| 系列： | TANTAMOUNT® T95 |
| 电容： | 68µF |
| 电压 - 额定： | 25V |
| 容差： | ±20% |
| ESR（等效串联电阻）： | 95 毫欧 |
| 类型： | 保形涂层 |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 2824（7260 公制） |
| 尺寸/尺寸： | 0.283" L x 0.236" W（7.20mm x 6.00mm） |
| 高度 - 座高（最大）： | 0.150"（3.80mm） |
| 制造商尺寸代码： | R |
| 特点： | COTS（高可靠性） |
| 包装： | 带卷 (TR) |
Typical Performance Characteristics
www.vishay.com
CAPACITOR ENVIRONMENTAL CHARACTERISTICS
Vishay Sprague
ITEM
CONDITION
ENVIRONMENTAL CHARACTERISTICS
Humidity tests
At 40 °C/90 % RH 1000 h, no voltage applied. ?
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Not to exceed 150 % of initial ?
+25 °C requirement
Temperature cycles
Moisture resistance
Thermal shock
At -55 °C/+125 °C, 30 min each, for 5 cycles.
MIL-STD-202, method 106 at rated voltage,
42 cycles.
Capacitors are subjected to 5 cycles of the
following: ?
-55 °C (+0 °C, -5 °C) for 30 min, then ?
+25 °C (+10 °C, -5 °C) for 5 min, then ?
+125 °C (+3 °C, -0 °C) for 30 min, then ?
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor ?
Leakage current
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor ?
Leakage current
Capacitance change ?
Cap. ? 600 μF ?
Cap. > 600 μF ?
Dissipation factor ?
Leakage current
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Initial specified value or less ?
Initial specified value or less
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Initial specified value or less ?
Initial specified value or less
?
Within ± 10 % of initial value ?
Within ± 20 % of initial value ?
Initial specified value or less ?
Initial specified value or less
+25 °C (+10 °C, -5 °C) for 5 min
MECHANICAL PERFORMANCE CHARACTERISTICS
TEST CONDITION
CONDITION
POST TEST PERFORMANCE
Shear test
Apply a pressure load of 5 N for 10 s ± 1 s
horizontally to the center of capacitor side body.
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Substrate bend
Vibration
With parts soldered onto substrate test board,
apply force to the test board for a deflection
of 3 mm, for a total of 3 bends at a rate of 1 mm/s.
MIL-STD-202, method 204, condition D, 10 Hz to
2000 Hz, 20 g peak
Capacitance change ?
Dissipation factor ?
Leakage current
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Shock
MIL-STD-202, method 213B shock (specified
pulse), condition I, 100 g peak
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Resistance to solder heat
? Recommended reflow profiles temperatures
and durations are located within the Capacitor
Series Guides
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
? Pb-free and lead-bearing series caps are
backward and forward compatible
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Solderability
MIL-STD-2002, method 208, ANSI/J-STD-002,
test B. Applies only to solder and tin plated
terminations. ?
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
Does not apply to gold terminations.
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Resistance to solvents
MIL-STD-202, method 215
Capacitance change ?
Dissipation factor ?
Leakage current
Within ± 10 % of initial value ?
Initial specified value or less ?
Initial specified value or less
There shall be no mechanical or visual damage to
capacitors post-conditioning.
Flammability
Encapsulent materials meet UL 94 V-0 with an
oxygen index of 32 %.
Revision: 03-Feb-14
3
Document Number: 40088
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
相关PDF资料 |
PDF描述 |
|---|---|
| HR-4/5AUL2X2 | BATT PACK 4.8V 4/5A 1900MAH NIMH |
| T95R686K025HSSL | CAP TANT 68UF 25V 10% 2824 |
| ASC22DRYH-S93 | CONN EDGECARD 44POS DIP .100 SLD |
| T95R397M6R3HSSL | CAP TANT 390UF 6.3V 20% 2824 |
| PSAA20R-033-R-C4 | ADAPTER WALL R-SERIES 20W 3.3V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS3254N# | 功能描述:网络控制器与处理器 IC Quad DS3/E3/STS-1 Line Interface Unit RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
| DS3254N+ | 功能描述:网络控制器与处理器 IC Quad DS3/E3/STS-1 Line Interface Unit RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
| DS3254NA3 | 制造商:Maxim Integrated Products 功能描述:QUAD ENH DS3/E3 LIU REV A3 IND - Rail/Tube |
| DS3256 | 功能描述:网络控制器与处理器 IC X6 T3/E3 Line Interface Unit RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
| DS3256N | 功能描述:网络控制器与处理器 IC X6 T3/E3 Line Interface Unit RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
发布紧急采购，3分钟左右您将得到回复。