hitron品牌200w led驱动电源

品牌：hitron

specification  
input specification  output specification
input voltage: typ. 90-264vac.
output voltage: +26v.
input connector: b-s connector.
output current: typ. 7a, max and peak 7.7a.
input frequency: 47-63hz.
inrush current: typ. 10arms @230vac.  output wattage: typ. 200 watts.
input current: typ. 2.4a @115vac, 1.1a @ 230vac.
output connector: b-s connector.
dielectric withstand: meet iec 60950-1.
emi: meet cispr pub.22 & fcc class a.  line regulation: typ. 0.5%.
hold-up time: typ. 30ms @115vac, 80ms @230vac.
load regulation: typ. ±5%.
power factor & harmonic correction:
total regulation: typ. ±5%.
meet iec61000-3-2, pfc 0.965-0.997.
earth leakage: typ. 0.5ma @230vac.  noise & ripple: typ. 180mv.
remote on/off: available.
ovp: built-in(latch).
over load protection: 100% at 115vac.
over temperature protection: build-in.  adjustability: factory set.
general specification
efficiency: typ. 86%.  operating temperature:-30 to +60°c with derating.
(please refer to the derating chart)
switching frequency: 80 khz.   
storage temperature: -20 to +85°c.
circuit topology: forward step-up circuit.
cooling: free air convection.
transient response: peak deviation is 200mv and output
construction: u-bracket format.
voltage returns in less than 3ms following a 25% load
change.  power density: 1.376watts / cubic inch.
safety standard:iec 60950-1/ul 60950-1 class i.
note: due to requests in market and advances in technology, specifications subject to change without notification.