- 您现在的位置：买卖IC网 > Datasheet目录862 > HKS48T30120-PCA0 (Power-One)DC/DC HALF BRICK 20V 0UT 48V IN Datasheet资料下载
参数资料
| 型号： | HKS48T30120-PCA0 |
| 厂商： | Power-One |
| 文件页数： | 13/14页 |
| 文件大小： | 0K |
| 描述： | DC/DC HALF BRICK 20V 0UT 48V IN |
| 标准包装： | 50 |
| 系列： | * |
HKS48T30120 DC-DC Series Data Sheet
Half-Brick with 48VDC Input; 12VDC @ 32A Output
Safety Considerations
The HKS converters feature 1500 VDC isolation from
the input-to-output. The input-to-output resistance is
greater than 10M ? . These converters are provided
with Basic insulation between input and output
circuits according to all IEC60950 based standards.
Nevertheless, if the system using the converter
In order for the output of the HKS converter to be
considered as SELV (Safety Extra Low Voltage) or
TNV-1, according to all IEC60950 based standards,
one of the following requirements must be met in the
system design:
needs to receive safety agency approval, certain
rules must be followed in the design of the system.
In particular, all of the creepage and clearance
requirements of the end-use safety requirements
must be observed. These documents include
UL60950 - CSA60950-00 and EN60950, although
other or additional requirements may be needed for
specific applications.
The HKS converters have no internal fuse. The
external fuse must be provided to protect the
system from catastrophic failure. Refer to the
“Input Fuse Selection for DC/DC converters”
application note on www.power-one.com for proper
selection of the input fuse. Both input traces and the
chassis ground trace (if applicable) must be capable
of conducting a current of 1.5 times the value of the
fuse without opening. The fuse must not be placed
in the grounded input line, if any.
Converter Part Numbering Ordering Information
?
?
?
If the voltage source feeding the module is SELV
or TNV-2, the output of the converter may be
grounded or ungrounded.
If the voltage source feeding the module is ELV,
the output of the converter may be considered
SELV only if the output is grounded per the
requirements of the standard.
If the voltage source feeding the module is a
Hazardous Voltage Secondary Circuit, the voltage
source feeding the module must be provided with
at least Basic insulation between the source to the
converter and any hazardous voltages. The
entire system, including the HKS converter, must
pass a dielectric withstand test for Reinforced
insulation. Design of this type of system requires
expert engineering and understanding of the
overall safety requirements, and should be
performed by qualified personnel.
Series
# Out
Vin nom.
I/O type
Io
Vo
-
On/Off
Height
Pin
Special
(Approx.)
(nom. X 10)
logic
length
options
HK
S
48
T
30
120
-
P, N
C A, B, C
0
?-Brick,
Single
35 – 75 VDC
Thru-hole
ADC
VDC
See table below
output
Features & Options :
Remote ON/OFF
Unit Height
Pin Length
Special Options
RoHS
RoHS lead solder
exemption
RoHS compliant for all six
substances
FEB 14, 2006 revised to MAY 17, 2006
Descriptions:
Positive logic
Negative logic
0.50” nom. (fixed value, no alternative height)
0.18” (standard model length)
0.145”
0.110”
None (standard model, no special options)
Customer-specific models
Add to Part Number
No RoHS character required.
Add "G" as the last character of the part number.
Page 13 of 14
Suffix code:
-P xxx
-N xxx
- x C xx
- xx A x
- xx B x
- xx C x
- xxx 0
- xxx S#
www.power-one.com
相关PDF资料 |
PDF描述 |
|---|---|
| HL01R05S12YC | CONV DC/DC 12V 83MA REGULATED |
| HL02100GTTR | INDUCTOR 10NH 235MA 0402 |
| HL02R24S05YC | CONV DC/DC 5V 400MA REGULATED |
| HM100-252R0LFTR13 | HIGH CURR LOW PROFILE INDUCTORS |
| HM11-11001LF | VERTICAL MOUNT INDUCTORS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HKS48T30120-PCA0G | 制造商:Power-One 功能描述: |
| HKS48T30120-PCAO | 制造商:Power-One 功能描述:- Bulk |
| HKSW0101WP | 制造商:Maxxtro 功能描述: |
| HKT | 制造商:KINGTRONICS 制造商全称:KINGTRONICS 功能描述:HKT Chip Capacitor a?? SMD |
发布紧急采购，3分钟左右您将得到回复。