参数资料
型号: HY29F800ATG-90
厂商: HYNIX SEMICONDUCTOR INC
元件分类: DRAM
英文描述: 8 Megabit (1Mx8/512Kx16), 5 Volt-only, Flash Memory
中文描述: 512K X 16 FLASH 5V PROM, 90 ns, PDSO44
封装: PLASTIC, SOP-44
文件页数: 2/40页
文件大小: 279K
代理商: HY29F800ATG-90
2
Rev. 1.1/Feb 02
HY29F800A
version operating over 5.0 volts ± 5% is also avail-
able. To eliminate bus contention, the HY29F800A
has separate chip enable (CE#), write enable
(WE#) and output enable (OE#) controls.
The device is compatible with the JEDEC single
power-supply Flash command set standard. Com-
mands are written to the command register using
standard microprocessor write timings, from where
they are routed to an internal state-machine that
controls the erase and programming circuits. De-
vice programming is performed a byte at a time
by executing the four-cycle Program Command.
This initiates an internal algorithm that automati-
cally times the program pulse widths and verifies
proper cell margin.
The HY29F800A
s sector erase architecture allows
any number of array sectors to be erased and re-
programmed without affecting the data contents
of other sectors. Device erasure is initiated by ex-
ecuting the Erase Command. This initiates an in-
ternal algorithm that automatically preprograms the
array (if it is not already programmed) before ex-
ecuting the erase operation. During erase cycles,
the device automatically times the erase pulse
widths and verifies proper cell margin.
To protect data in the device from accidental or
unauthorized attempts to program or erase the
device while it is in the system (e.g., by a virus),
BLOCK DIAGRAM
the device has a Sector Protect function which
hardware write protects selected sectors. The
sector protect and unprotect features can be en-
abled in a PROM programmer. Temporary Sector
Unprotect, which requires a high voltage, allows
in-system erasure and code changes in previously
protected sectors.
Erase Suspend enables the user to put erase on
hold for any period of time to read data from, or
program data to, any sector that is not selected
for erasure. True background erase can thus be
achieved. The device is fully erased when shipped
from the factory.
Addresses and data needed for the programming
and erase operations are internally latched during
write cycles, and the host system can detect
completion of a program or erase operation by
observing the RY/BY# pin, or by reading the DQ[7]
(Data# Polling) and DQ[6] (toggle) status bits.
Reading data from the device is similar to reading
from SRAM or EPROM devices. Hardware data
protection measures include a low V
detector
that automatically inhibits write operations during
power transitions.
The host can place the device into the standby
mode. Power consumption is greatly reduced in
this mode.
STATE
CONTROL
WE#
CE#
OE#
BYTE#
COMMAND
REGISTER
DQ[15:0]
A[18:0], A-1
V
CC
DETECTOR
TIMER
ERASE VOLTAGE
GENERATOR AND
SECTOR SWITCHES
PROGRAM
VOLTAGE
GENERATOR
A
X-DECODER
Y-DECODER
8 Mb FLASH
MEMORY
ARRAY
Y-GATING
DATA LATCH
I/O BUFFERS
I/O CONTROL
RESET#
DQ[15:0]
A[18:0], A-1
RY/BY#
相关PDF资料
PDF描述
HY29F800ATG-90I 8 Megabit (1Mx8/512Kx16), 5 Volt-only, Flash Memory
HY29F800ATR-12 8 Megabit (1Mx8/512Kx16), 5 Volt-only, Flash Memory
HY29F800ATR-12I 8 Megabit (1Mx8/512Kx16), 5 Volt-only, Flash Memory
HY29LV320TF-90 32 Mbit (2M x 16) Low Voltage Flash Memory
HY29LV320BF-12 Dust Cover; For Use With:Anderson Power SB350 Series Connectors; Color:Red
相关代理商/技术参数
参数描述
HY29F800ATG-90I 制造商:HYNIX 制造商全称:Hynix Semiconductor 功能描述:8 Megabit (1Mx8/512Kx16), 5 Volt-only, Flash Memory
HY29F800ATR-12 制造商:HYNIX 制造商全称:Hynix Semiconductor 功能描述:8 Megabit (1Mx8/512Kx16), 5 Volt-only, Flash Memory
HY29F800ATR-12I 制造商:HYNIX 制造商全称:Hynix Semiconductor 功能描述:8 Megabit (1Mx8/512Kx16), 5 Volt-only, Flash Memory
HY29F800ATR-55 制造商:HYNIX 制造商全称:Hynix Semiconductor 功能描述:8 Megabit (1Mx8/512Kx16), 5 Volt-only, Flash Memory
HY29F800ATR-55I 制造商:HYNIX 制造商全称:Hynix Semiconductor 功能描述:8 Megabit (1Mx8/512Kx16), 5 Volt-only, Flash Memory