参数资料
型号: LTC1749CFW#TR
厂商: Linear Technology
文件页数: 8/20页
文件大小: 0K
描述: IC ADC 12BIT 80MSPS SMPL 48TSSOP
标准包装: 1,800
位数: 12
采样率(每秒): 80M
数据接口: 并联
转换器数目: 1
功率耗散(最大): 1.69W
电压电源: 单电源
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 48-TFSOP(0.240",6.10mm 宽)
供应商设备封装: 48-TSSOP
包装: 带卷 (TR)
输入数目和类型: 2 个单端,双极;1 个差分,双极
16
LTC1749
1749f
Maximum and Minimum Encode Rates
The maximum encode rate for the LTC1749 is 80Msps. For
the ADC to operate properly the encode signal should have
a 50% (
±4%) duty cycle. Each half cycle must have at least
6ns for the ADC internal circuitry to have enough settling
time for proper operation. Achieving a precise 50% duty
cycle is easy with differential sinusoidal drive using a
transformer or using symmetric differential logic such as
PECL or LVDS. When using a single-ended encode signal
asymmetric rise and fall times can result in duty cycles that
are far from 50%.
At sample rates slower than 80Msps the duty cycle can
vary from 50% as long as each half cycle is at least 6ns.
The lower limit of the LTC1749 sample rate is determined
by droop of the sample-and-hold circuits. The pipelined
APPLICATIO S I FOR ATIO
WU
UU
architecture of this ADC relies on storing analog signals on
small valued capacitors. Junction leakage will discharge
the capacitors. The specified minimum operating fre-
quency for the LTC1749 is 1Msps.
DIGITAL OUTPUTS
Digital Output Buffers
Figure 9 shows an equivalent circuit for a single output
buffer. Each buffer is powered by OVDD and OGND, iso-
lated from the ADC power and ground. The additional
N-channel transistor in the output driver allows operation
down to low voltages. The internal resistor in series with
the output makes the output appear as 50
to external
circuitry and may eliminate the need for external damping
resistors.
Figure 7. Transformer Driven ENC/ENC
Figure 8a. Single-Ended ENC Drive,
Not Recommended for Low Jitter
Figure 8b. ENC Drive Using a CMOS-to-PECL Translator
VDD
LTC1749
1749 F07
BIAS
VDD
5V
ENC
ANALOG INPUT
2V BIAS
1:4
0.1
F
CLOCK
INPUT
50
6k
TO INTERNAL
ADC CIRCUITS
1749 F08a
ENC
2V
VTHRESHOLD = 2V
ENC
0.1
F
LTC1749
1749 F08b
ENC
130
3.3V
130
D0
Q0
MC100LVELT22
LTC1749
83
83
相关PDF资料
PDF描述
LTC1747CFW#TR IC ADC SMPL 12BIT 80MSPS 48TSSOP
SN74ACT7807-20PAG IC SYNC FIFO MEM 2048X9 64-TQFP
CXC3106A2821P CONN PLUG 37POS STRGHT PIN
AD7892BRZ-1REEL IC ADC 12BIT LP 500KSPS 24SOIC
MS3101R14S-2P CONN RCPT 4POS PANEL MNT W/PINS
相关代理商/技术参数
参数描述
LTC1749IFW 功能描述:IC ADC 12BIT 80MSPS SMPL 48TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率(每秒):83k 数据接口:串行,并联 转换器数目:1 功率耗散(最大):95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP(0.600",15.24mm) 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端,双极
LTC1749IFW#PBF 功能描述:IC ADC 12BIT 80MSPS SMPL 48TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 位数:12 采样率(每秒):3M 数据接口:- 转换器数目:- 功率耗散(最大):- 电压电源:- 工作温度:- 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-23-6 包装:带卷 (TR) 输入数目和类型:-
LTC1749IFW#TR 功能描述:IC ADC 12BIT 80MSPS SMPL 48TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率(每秒):83k 数据接口:串行,并联 转换器数目:1 功率耗散(最大):95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP(0.600",15.24mm) 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端,双极
LTC1749IFW#TRPBF 功能描述:IC ADC 12BIT 80MSPS SMPL 48TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 位数:12 采样率(每秒):3M 数据接口:- 转换器数目:- 功率耗散(最大):- 电压电源:- 工作温度:- 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-23-6 包装:带卷 (TR) 输入数目和类型:-
LTC1750CFW 功能描述:IC ADC 14BIT 80MSPS SMPL 48TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率(每秒):83k 数据接口:串行,并联 转换器数目:1 功率耗散(最大):95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP(0.600",15.24mm) 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端,双极