参数资料
型号: MB91661PMC
厂商: FUJITSU LTD
元件分类: 微控制器/微处理器
英文描述: 32-BIT, MROM, 33 MHz, RISC MICROCONTROLLER, PQFP120
封装: 16 X 16 MM, 1.70 MM HEIGHT, 0.50 MM PITCH, PLASTIC, LQFP-120
文件页数: 55/128页
文件大小: 3660K
代理商: MB91661PMC
MB91660 Series
32
DS07-16905-4E
Latch-up
Semiconductor devices are constructed by the formation of P-type and N-type areas on a substrate. When
subjected to abnormally high voltages, internal parasitic PNPN junctions (called thyristor structures) may be
formed, causing large current levels in excess of several hundred mA to flow continuously at the power supply
pin. This condition is called latch-up.
Note: The occurrence of latch-up not only causes loss of reliability in the semiconductor device, but can cause
injury or damage from high heat, smoke or flame. To prevent this from happening, do the following:
(a) Be sure that voltages applied to pins do not exceed the absolute maximum ratings. This should include
attention to abnormal noise, surge levels, etc.
(b) Be sure that abnormal current flows do not occur during the power-on sequence.
Observance of Safety Regulations and Standards
Most countries in the world have established standards and regulations regarding safety, protection from elec-
tromagnetic interference, etc. Customers are requested to observe applicable regulations and standards in the
design of products.
Fail-Safe Design
Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or
loss from such failures by incorporating safety design measures into your facility and equipment such as redun-
dancy, fire protection, and prevention of over-current levels and other abnormal operating conditions.
Precautions Related to Usage of Devices
FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation
and other office equipment, industrial, communications, and measurement equipment, personal or household
devices, etc.).
CAUTION: Customers considering the use of our products in special applications where failure or abnormal
operation may directly affect human lives or cause physical injury or property damage, or where extremely high
levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters,
vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales
representatives before such use. The company will not be responsible for damages arising from such use without
prior approval.
相关PDF资料
PDF描述
MPC8266ACZULHDX 32-BIT, 250 MHz, RISC PROCESSOR, PBGA480
MPC8266ACZUPIBX 32-BIT, 300 MHz, RISC PROCESSOR, PBGA480
MPC8266AZULHDX 32-BIT, 250 MHz, RISC PROCESSOR, PBGA480
MPC8266AZUPIBX 32-BIT, 300 MHz, RISC PROCESSOR, PBGA480
MK10N512VML100R RISC MICROCONTROLLER, PBGA104
相关代理商/技术参数
参数描述
MB-9-187 功能描述:MOUNTING BUTTON 9/32 TO 11/32 RoHS:是 类别:硬件,紧固件,配件 >> 铆钉 系列:MB 产品培训模块:Rivets and Hardware Engineering Technology Injection Molding and Plastics Plastic Materials 标准包装:1,000 系列:SR 类型:卡入式 铆钉直径:0.197"(5.00mm) 接头直径:0.354"(8.99mm) 铆钉长度:0.260"(6.60mm) 孔直径:0.203"(5.16mm) 面板厚度:0.098 ~ 0.138"(2.49 ~ 3.51mm) 接头高度:0.087"(2.21mm) 特点:阻燃 颜色:黑 材质:尼龙 其它名称:61100367SRVO-5055 BSRVO-5055 B-NDSRVO5055B
MB91F109 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit RISC Microcontroller
MB91F109PF 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit RISC Microcontroller
MB91F109PFR-GE1 制造商:FUJITSU 功能描述:
MB91F109PFV 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit RISC Microcontroller