- 您现在的位置：买卖IC网 > PDF目录16708 > VERSAFIT-3X-1-0-SP (TE Connectivity)HEAT SHRINK TUBING PDF资料下载
参数资料
| 型号： | VERSAFIT-3X-1-0-SP |
| 厂商： | TE Connectivity |
| 文件页数： | 3/7页 |
| 文件大小： | 0K |
| 描述： | HEAT SHRINK TUBING |
| 标准包装： | 250 |
| 系列： | Versafit; 3X |
| 类型： | 套管，弹性 |
| 收缩比率： | 3 至 1 |
| 内径 - 提供： | 1.000"（25.4mm） |
| 内径 - 恢复： | 0.334"（8.5mm） |
| 已恢复的墙壁厚度： | 0.025"（0.64mm） |
| 材质： | 聚烯烃 |
| 特点： | 阻燃 |
| 颜色： | 黑 |
| 其它名称： | 7145794002 |
SPECIFICATION RW-3009 ISSUE 3
Page 3
4.3
4.3.1
TEST PROCEDURES
Unless otherwise specified, tests shall be performed on specimens which have been fully recovered by
conditioning in accordance with 4.3.1 Prior to all testing, the test specimen (and measurement gauges, when
applicable) shall be conditioned for 3 hours at 23 ± 3°C (73 ± 5°F) and 50 ± 5 percent relative humidity. All
ovens shall be of the mechanical convection type in which air passes the specimens at a velocity of 30 - 60 m
(100 to 200 feet) per minute.
Dimensions and Longitudinal Change
Three 150-mm (6-inch) specimens of tubing, as supplied, shall be measured for length, to an accuracy of ± 1
mm (±1/32 inch), and inside diameter in accordance with ASTM D 2671. The specimens then shall be
conditioned for 3 minutes in a 200 ± 3°C (392 ± 5°F) oven, removed from the oven, cooled to 23 ± 3°C (73 ±
5°F), re-measured for length, inside diameter, and wall thickness in accordance with ASTM D 2671. The
longitudinal change shall be calculated as follows:
C =
L1 - L0
L0
x 100
Where:
C = Longitudinal Change (percent)
L0 = Length Before Conditioning [mm (inches)]
L1 = Length After Conditioning [mm (inches)]
4.3.2
4.3.3
4.3.4
Tensile Strength and Ultimate Elongation
The tensile strength and ultimate elongation of the tubing shall be determined in accordance with ASTM D
2671 using 25-mm (1-inch) benchmarks and a 25-mm (1-inch) initial jaw separation. The speed of jaw
separation shall be 500 ± 50 mm (20 ± 2 inches) per minute.
Secant Modulus
The secant modulus of the tubing shall be tested using tubing as supplied in accordance with ASTM D 2671.
Copper Stability
Three 150-mm (6-inch) specimens of tubing shall be slipped over a snug filling, straight, clean, bare copper
conductor. For tubing sizes 1/4 and smaller a solid conductor shall be used; for tubing sizes 3/8 and larger a
solid or tubular conductor shall be used. The specimens on the conductors shall be conditioned for 24 hours
in a desiccator or similar humidity chamber at 90 to 95 percent relative humidity and 23 ± 3°C (73 ± 5°F).
Three specimens shall be conditioned for 7 days in 158.0 ± 1.0°C (316.4± 1.8°F) oven. After conditioning,
the specimens shall be removed from the oven and cooled to 23 ± 3°C (73 ± 5°F). The copper conductor
than shall be removed from the tubing, and the tubing and conductor shall then be examined. Darkening of
the copper due to normal air oxidation shall not be cause for rejection. The tubing then shall be conditioned
at room temperature for 16 to 96 hours and tested for ultimate elongation in accordance with 4.3.2.
If this document is printed it becomes uncontrolled. Check for the latest revision.
相关PDF资料 |
PDF描述 |
|---|---|
| RBC22DRYI | CONN EDGECARD 44POS DIP .100 SLD |
| HMM08DSXN | CONN EDGECARD 16POS DIP .156 SLD |
| V48C28T75BF3 | CONVERTER MOD DC/DC 28V 75W |
| MT2000-3.0-6-SP | HEAT SHRINK TUBING |
| A3AAH-1436G | IDC CABLE - ASC14H/AE14G/ASC14H |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC10EL31DTR2G | 功能描述:触发器 5V ECL D-Type w/Set and Reset RoHS:否 制造商:Texas Instruments 电路数量:2 逻辑系列:SN74 逻辑类型:D-Type Flip-Flop 极性:Inverting, Non-Inverting 输入类型:CMOS 输出类型: 传播延迟时间:4.4 ns 高电平输出电流:- 16 mA 低电平输出电流:16 mA 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:X2SON-8 封装:Reel |
| MC10EL32D | 功能描述:时钟驱动器及分配 5V ECL Divide By 2 RoHS:否 制造商:Micrel 乘法/除法因子:1:4 输出类型:Differential 最大输出频率:4.2 GHz 电源电压-最大: 电源电压-最小:5 V 最大工作温度:+ 85 C 封装 / 箱体:SOIC-8 封装:Reel |
| MC10EL32DG | 功能描述:时钟驱动器及分配 5V ECL Divide By 2 Divider RoHS:否 制造商:Micrel 乘法/除法因子:1:4 输出类型:Differential 最大输出频率:4.2 GHz 电源电压-最大: 电源电压-最小:5 V 最大工作温度:+ 85 C 封装 / 箱体:SOIC-8 封装:Reel |
| MC10EL32DR2 | 功能描述:时钟驱动器及分配 5V ECL Divide By 2 RoHS:否 制造商:Micrel 乘法/除法因子:1:4 输出类型:Differential 最大输出频率:4.2 GHz 电源电压-最大: 电源电压-最小:5 V 最大工作温度:+ 85 C 封装 / 箱体:SOIC-8 封装:Reel |
| MC10EL32DR2G | 功能描述:时钟驱动器及分配 5V ECL Divide By 2 Divider RoHS:否 制造商:Micrel 乘法/除法因子:1:4 输出类型:Differential 最大输出频率:4.2 GHz 电源电压-最大: 电源电压-最小:5 V 最大工作温度:+ 85 C 封装 / 箱体:SOIC-8 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。