- 您现在的位置：买卖IC网 > PDF目录16698 > NT-5/8-0-SP (TE Connectivity)HEAT SHRINK TUBING PDF资料下载
参数资料
| 型号： | NT-5/8-0-SP |
| 厂商： | TE Connectivity |
| 文件页数： | 2/6页 |
| 文件大小： | 0K |
| 描述： | HEAT SHRINK TUBING |
| 标准包装： | 300 |
| 系列： | NT |
| 类型： | 套管，弹性 |
| 收缩比率： | 1.75 至 1 |
| 内径 - 提供： | 0.626"（15.9mm） |
| 内径 - 恢复： | 0.358"（9.1mm） |
| 已恢复的墙壁厚度： | 0.052"（1.32mm） |
| 材质： | 聚烯烃 |
| 特点： | 防水 |
| 颜色： | 黑 |
| 其它名称： | 5550044008 |
Page 2
4.0
4.1
4.1.1
4.1.2
4.2
4.2.1
4.2.2
4.3
SPECIFICATION RT-510 ISSUE 12
Quality Assurance Provisions
Classification of Tests
Qualification Tests
Qualification tests are those performed on tubing submitted for qualification as a satisfactory product and
shall consist of all tests listed in this specification.
Acceptance Tests
Acceptance tests are those performed on tubing submitted for acceptance under contract. Acceptance tests
shall consist of the following:
Dimensions
Longitudinal Change
Tensile Strength
Tensile Stress
Ultimate Elongation
Heat Shock
Flammability
Low Temperature Flexibility
Physical property tests performed at this time qualify subsequent sleeving lots produced from the same
batch of compound. Statistical process control data may be used to demonstrate conformance for
dimensions.
Sampling Instructions
Qualification Test Samples
Qualification test samples shall consist of 50 feet (15 m) of tubing of each size. Qualification of any size
within each size range specified below will qualify all sizes in the same range.
Size Range
1/8 through 7/8
1 through 4
Acceptance Test Samples
Acceptance test samples shall consist of not less than 16 feet (5 m) of tubing selected at random from each
lot. A lot shall consist of all tubing of the same size, from the same production run and offered for
inspection at the same time.
Test Procedures
Unless otherwise specified, tests shall be performed on specimens which have been fully recovered by
conditioning for 10 minutes in a 175 ± 5°C (347 ± 9°F) oven. All ovens shall be of the mechanical
convection type in which air passes over the specimens at a velocity of 100 to 200 feet (30 to 61 m) per
minute. Tubing shall be allowed to cool to room temperature prior to testing. The Heat Shrinkable
Sleeving and Measurement Gages shall be at room temperature with ambient relative humidity prior to
testing before or after heat shrinking.
If this document is printed it becomes uncontrolled. Check for the latest revision.
? 2005-2010 Tyco Electronics Corporation. All rights reserved
相关PDF资料 |
PDF描述 |
|---|---|
| A8MMS-1006G | ADM10S/AE10G/ADM10S |
| H2PXH-1436G | DIP CABLE - HDP14H/AE14G/X |
| VERSAFIT-2-0-SP | HEAT SHRINK TUBING |
| 207W223-25/86-0 | BOOT MOLDED |
| ECM10DCBT-S189 | CONN EDGECARD 20POS R/A .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC74ACT273ML1 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MC74ACT273MR2 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MC74ACT273N | 功能描述:触发器 5V CMOS Octal RoHS:否 制造商:Texas Instruments 电路数量:2 逻辑系列:SN74 逻辑类型:D-Type Flip-Flop 极性:Inverting, Non-Inverting 输入类型:CMOS 输出类型: 传播延迟时间:4.4 ns 高电平输出电流:- 16 mA 低电平输出电流:16 mA 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:X2SON-8 封装:Reel |
| MC74ACT273NG | 功能描述:触发器 5V CMOS Octal D-Type RoHS:否 制造商:Texas Instruments 电路数量:2 逻辑系列:SN74 逻辑类型:D-Type Flip-Flop 极性:Inverting, Non-Inverting 输入类型:CMOS 输出类型: 传播延迟时间:4.4 ns 高电平输出电流:- 16 mA 低电平输出电流:16 mA 电源电压-最大:5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:X2SON-8 封装:Reel |
| MC74ACT299 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:8-Input Universal Shift/ Storage Register with Common Parallel I/O Pins |
发布紧急采购，3分钟左右您将得到回复。