参数资料
型号: MPC5602CF1MLL6
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: MICROCONTROLLER, PQFP100
封装: 14 X 14 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, LQFP-100
文件页数: 33/106页
文件大小: 1693K
代理商: MPC5602CF1MLL6
MPC560
4B/C
Micr
ocontr
olle
rData
Sheet,
Re
v
.8
Ele
c
trical
cha
rac
te
ristic
s
Fre
e
scale
Semico
nductor
32
4
Electrical characteristics
4.1
Introduction
This section contains electrical characteristics of the device as well as temperature and power considerations.
This product contains devices to protect the inputs against damage due to high static voltages. However, it is advisable to take precautions to avoid application
of any voltage higher than the specified maximum rated voltages.
To enhance reliability, unused inputs can be driven to an appropriate logic voltage level (VDD or VSS). This could be done by the internal pull-up and pull-down,
which is provided by the product for most general purpose pins.
The parameters listed in the following tables represent the characteristics of the device and its demands on the system.
In the tables where the device logic provides signals with their respective timing characteristics, the symbol “CC” for Controller Characteristics is included in
the Symbol column.
In the tables where the external system must provide signals with their respective timing characteristics to the device, the symbol “SR” for System Requirement
is included in the Symbol column.
CAUTION
All 64 LQFPinformation is indicative and must be confirmed during silicon validation.
8 This pad is used on MPC5607B 100-pin and 144-pinto provide supply for the second ADC. Therefore it is recommended not using it to
keep the compatibility with the family devices.
9 Out of reset all the functional pins except PC[0:1] and PH[9:10] are available to the user as GPIO.
PC[0:1] are available as JTAG pins (TDI and TDO respectively).
PH[9:10] are available as JTAG pins (TCK and TMS respectively).
It is up to the user to configure these pins as GPIO when needed, in this case MPC5604B/C get incompliance with IEEE 1149.1-2001.
10 The TDO pad has been moved into the STANDBY domain in order to allow low-power debug handshaking in STANDBY mode. However,
no pull-resistor is active on the TDO pad while in STANDBY mode. At this time the pad is configured as an input. When no debugger is
connected the TDO pad is floating causing additional current consumption. To avoid the extra consumption TDO must be connected.
An external pull-up resistor in the range of 47–100 kOhms should be added between the TDO pin and VDD. Only in case the TDO pin
is used as application pin and a pull-up cannot be used then a pull-down resistor with the same value should be used between TDO pin
and GND instead.
11 Available only on MPC560xC versions and MPC5604B 208 MAPBGA devices
12 Not available on MPC5602B devices
13 Not available in 100 LQFP package
14 Available only on MPC5604B 208 MAPBGA devices
15 Not available on MPC5603B 144-pin devices
相关PDF资料
PDF描述
MPC5604BF1CMG6R MICROCONTROLLER, PBGA208
MAC7131MVF50XX MICROCONTROLLER, PBGA208
MB9AF112MPMC 32-BIT, FLASH, RISC MICROCONTROLLER, PQFP80
MCF51AG128VQH RISC MICROCONTROLLER, PQFP64
MCF51AG128VQH MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
MPC5602CVLL6 制造商:Freescale Semiconductor 功能描述:256K FLASH, 32K RAM - Trays
MPC5602D 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Up to 256 KB on-chip Code Flash supported with Flash controller and ECC
MPC5602DPB 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:MPC5602D Microcontroller Product Brief
MPC5602DXLH 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Up to 256 KB on-chip Code Flash supported with Flash controller and ECC
MPC5602DXLL 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Up to 256 KB on-chip Code Flash supported with Flash controller and ECC