- 您现在的位置：买卖IC网 > PDF目录19624 > NCP1230P100G (ON Semiconductor)IC CTRLR PWM SMPS OVP OCP 7DIP PDF资料下载
参数资料
| 型号： | NCP1230P100G |
| 厂商： | ON Semiconductor |
| 文件页数： | 2/21页 |
| 文件大小： | 0K |
| 描述： | IC CTRLR PWM SMPS OVP OCP 7DIP |
| 标准包装： | 50 |
| 输出隔离： | 隔离 |
| 频率范围： | 100kHz |
| 输入电压： | 8.4 V ~ 18 V |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 8-DIP（0.300"，7.62mm），7 引线 |
| 供应商设备封装： | 7-PDIP |
| 包装： | 管件 |
NCP1230
HV
+
V out
+
CBulk
1
2
3
4
8
7
6
5
PFC_V CC
OVP
1
2
3
4
8
7
6
5
OVP
GN
D
MC33262/33260
NCP1230
Ramp Comp
Rsense
10 k
V CC Cap
GND
Figure 1. Typical Application Example
PIN FUNCTION DESCRIPTION
Pin No.
1
2
3
4
5
6
7
8
Pin Name
PFC V CC
FB
CS/OVP
GND
DRV
V CC
NC
HV
Function
This pin provides
the bias voltage to
the PFC controller.
Feedback Signal
Current Sense
IC Ground
Driver Output
V CC Input
?
High ? Voltage
Pin Description
This pin is a direct connection to the V CC pin (Pin 6) via a low impedance switch. In
standby and during the startup sequence, the switch is open and the PFC V CC is
shut down. As soon as the aux. winding is stabilized, Pin 1 connects to the V CC pin
and provides bias to the PFC controller. It goes down in standby and fault conditions.
An optocoupler collector pulls this pin low to regulate. When the current setpoint
reaches 25% of the maximum peak, the controller skips cycles.
This pin incorporates three different functions: the current sense function, an internal
ramp compensation signal and a 3.0 V latch ? off level which latches the output off
until V CC is recycled.
?
With a drive capability of +500 mA / ? 800 mA, the NCP1230 can drive large Qg
MOSFETs.
The controller accepts voltages up to 18 V and features a UVLO turn ? off threshold of
7.7 V typical.
?
This pin connects to the bulk voltage and offers a lossless startup sequence. The
charging current is high enough to support the bias needs of a PWM controller
through Pin 1.
http://onsemi.com
2
相关PDF资料 |
PDF描述 |
|---|---|
| V150A48E400BG2 | CONVERTER MOD DC/DC 48V 400W |
| R2D12-2405/HP | CONV DC/DC 2W +/-5VOUT SMD |
| DEHR33A221KA2B | CAP CER 220PF 1KV 10% RADIAL |
| F751A337KDC | CAP TANT 330UF 10V 10% 2917 |
| R2D12-2412/HP | CONV DC/DC 2W +/-12VOUT SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NCP1230P133 | 功能描述:电流型 PWM 控制器 Low Standby Power RoHS:否 制造商:Texas Instruments 开关频率:27 KHz 上升时间: 下降时间: 工作电源电压:6 V to 15 V 工作电源电流:1.5 mA 输出端数量:1 最大工作温度:+ 105 C 安装风格:SMD/SMT 封装 / 箱体:TSSOP-14 |
| NCP1230P133G | 功能描述:电流型 PWM 控制器 Low Standby Power High Performance PWM RoHS:否 制造商:Texas Instruments 开关频率:27 KHz 上升时间: 下降时间: 工作电源电压:6 V to 15 V 工作电源电流:1.5 mA 输出端数量:1 最大工作温度:+ 105 C 安装风格:SMD/SMT 封装 / 箱体:TSSOP-14 |
| NCP1230P65 | 功能描述:交流/直流开关转换器 Low Standby Power RoHS:否 制造商:STMicroelectronics 输出电压:800 V 输入/电源电压（最大值）:23.5 V 输入/电源电压（最小值）:11.5 V 开关频率:115 kHz 电源电流:1.6 mA 工作温度范围:- 40 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:SSO-10 封装:Reel |
| NCP1230P65G | 功能描述:电流型 PWM 控制器 Low Standby Power High Performance PWM RoHS:否 制造商:Texas Instruments 开关频率:27 KHz 上升时间: 下降时间: 工作电源电压:6 V to 15 V 工作电源电流:1.5 mA 输出端数量:1 最大工作温度:+ 105 C 安装风格:SMD/SMT 封装 / 箱体:TSSOP-14 |
| NCP1231 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Low−Standby Power High Performance PWM Controller |
发布紧急采购，3分钟左右您将得到回复。