产品概述
The STM32F429NIH6 is a STM32 F4 series 32-bit MICrocontroller based on the high-performance ARM Cortex-M4 RISC core operating at a frequency of up to 180MHz. Its Cortex-M4 core features a FPU single precision which supports all ARM single precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The device incorporate high-speed embedded memories (up to 2048kB of Flash memory, up to 256kB of SRAM), up to 4kB of backup SRAM and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix. This device offer three 12-bit ADC, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timer for motor control, two general-purpose 32-bit timers, as well as standard communication interfaces up to three I2Cs, six SPIs, two I2Ss, four USARTs and four UART.
225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
LCD parallel interface, 8080/6800 modes
LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator?
4 to 26MHz Crystal oscillator
Internal 16MHz factory-trimmed RC (1% accuracy)
32kHz Oscillator for RTC with calibration
Internal 32kHz RC with calibration
Sleep, stop and standby modes
VBAT supply for RTC, 20x32 -bits backup registers + optional 4kB backup SRAM
16-stream DMA Controller with FIFOs and burst support
SWD and JTAG interfaces
Cortex-M4 Trace Macrocell?
1 x SAI (serial audio interface)
2 x CAN (2.0B Active) and SDIO interface
USB 2.0 full speed device/host/OTG controller with on-chip PHY
USB 2.0 high-speed/full-speed device/host/OTG controller
10/100 Ethernet MAC with dedicated DMA - supports IEEE 1588v2 hardware, MII/RMII
8 to 14-bit parallel camera interface up to 54Mbps
True random number generator
CRC calculation unit
应用
电机驱动与控制, 自动化与过程控制, 医用, 消费电子产品, 电源管理, 安全, 成像, 视频和目视, HVAC, 音频
产品信息
产品范围: STM32 Family STM32F4 Series Microcontrollers 架构: ARM 皮质-M4 位数: 32位 CPU速度: 180MHz 程序内存大小: 2MB 存储器容量, RAM: 256KB 针脚数: 216引脚 MCU 封装类型: TFBGA 输入/输出数: 168输入 嵌入式接口类型: CAN, 以太网, I2C, SPI, UART, USART, USB 电源电压最小值: 1.8V 电源电压最大值: 3.6V MCU系列: STM32 MCU系列: STM32F4 MSL: MSL 3 - 168小时