产品概述
The MK10DX256VLH7 is a 32-bit Kinetis K1x Baseline MICrocontroller based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 72MHz. The device incorporates 288kB internal flash, 66kB internal RAM, 2kB EEPROM, two 16-bit SAR A/D converter, one 12-bit D/A converter and 44 general-purpose I/O pins. This device also features communication interfaces like three UART modules, one SPI module, two I2C modules and one I2S module.
3 to 32MHz Crystal oscillator
Multi-purpose clock generator
Multiple low-power modes to provide power optimization based on application requirements
16-channel DMA controller, supporting up to 128 request sources
External watchdog monitor
Software watchdog
Low-leakage wakeup unit
Hardware CRC module to support fast cyclic redundancy checks
128-bit Unique identification (ID) number per chip
Low-power hardware touch sensor interface (TSI)
General-purpose input/output
Three analog comparators (CMP) containing a 6-bit DAC and programmable reference input
Voltage reference
Programmable delay BLOCK
Eight channel motor control/general purpose/PWM timers
Two 2-channel quadrature decoder/general purpose timers
Periodic interrupt timers
16-bit Low-power timer
Carrier modulator transmitter
Real-time clock
应用
工业
产品信息
产品范围: Kinetis K Family K1x Series Microcontrollers 架构: ARM 皮质-M4 位数: 32位 CPU速度: 72MHz 程序内存大小: 256KB 存储器容量, RAM: 64KB 针脚数: 64引脚 MCU 封装类型: LQFP 输入/输出数: 44输入 嵌入式接口类型: CAN, I2C, I2S, SPI, UART 电源电压最小值: 1.71V 电源电压最大值: 3.6V MCU系列: Kinetis K MCU系列: K1x MSL: MSL 3 - 168小时