产品概述
The MKL26Z256VLL4 is a 32-bit Kinetis KL2x Ultra-low-power MICrocontroller with USB control, based on ARM Cortex-M0+ RISC architecture core operates at a maximum frequency of 48MHz. The device incorporates 256kB internal flash, 32kB internal RAM, one 16-bit SAR A/D converter, one 12-bit D/A converter, general purpose PWM and 80 general-purpose I/O pins. This device also features communication interfaces like three UART modules, one I2S module, two SPI modules and two I2C modules.
48MHz ARM Cortex-M0+ core
Nine low-power modes to provide power optimization based on application requirements
COP software watchdog
4-channel DMA controller, supporting up to 63 request sources
Low-leakage wakeup unit
SWD debug interface and micro trace buffer
Bit manipulation engine
Multi-purpose clock source
Low-power hardware touch sensor interface (TSI)
USB Full-/low-speed on-the-go controller with on-chip transceiver and 5V to 3.3V regulator
Analog comparator (CMP) containing a 6-bit DAC and programmable reference input
6-channel Timer/PWM (TPM)
Two 2-channel Timer/PWM module
Periodic interrupt timers
16-bit Low-power timer (LPTMR)
Real-time clock
80-bit Unique identification number per chip
应用
工业, 自动化与过程控制
产品信息
产品范围: Kinetis L Family KL2x Series Microcontrollers 架构: ARM 皮质-M0+ MCU内核尺寸: 32bit 程序内存大小: 256KB 存储器容量, RAM: 32KB CPU速度: 48MHz 输入/输出数: 80输入 MCU 封装类型: LQFP 针脚数: 100引脚 嵌入式接口类型: I2C, I2S, SPI, UART, USB MCU应用: USB微控制器 电源电压最小值: 1.71V 电源电压最大值: 3.6V MCU系列: Kinetis L MCU系列: KL2x 汽车质量标准: - MSL: MSL 3 - 168小时