MKE02Z64VLD4R
NXP
20+
LQFP44
5000多家会员为您找货报价,SO EASY!
品牌: NXP(恩智浦)
型号:MKE02Z64VLD4R
封装:LQFP44
KE02 Sub-Family Data Sheet Supports the following: MKE02Z16VLC4(R), MKE02Z32VLC4(R), MKE02Z64VLC4(R), MKE02Z16VLD4(R), MKE02Z32VLD4(R), MKE02Z64VLD4(R), MKE02Z32VLH4(R), MKE02Z64VLH4(R), MKE02Z32VQH4(R), MKE02Z64VQH4(R), MKE02Z16VFM4(R), MKE02Z32VFM4(R), and MKE02Z64VFM4(R) Key features ? Operating characteristics – Voltage range: 2.7 to 5.5 V – Flash write voltage range: 2.7 to 5.5 V – Temperature range (ambient): -40 to 105°C ? Performance – Up to 40 MHz Arm? Cortex-M0+ core and up to 20 MHz bus clock – Single cycle 32-bit x 32-bit multiplier – Single cycle I/O access port ? Memories and memory interfaces – Up to 64 KB flash – Up to 256 B EEPROM – Up to 4 KB RAM ? Clocks – Oscillator (OSC) - supports 32.768 kHz crystal or 4 MHz to 20 MHz crystal or ceramic resonator; choice of low power or high gain oscillators – Internal clock source (ICS) - internal FLL with internal or external reference, 31.25 kHz pretrimmed internal reference for 32 MHz system clock (able to be trimmed for up to 40 MHz system clock) – Internal 1 kHz low-power oscillator (LPO) ? System peripherals – Power management module (PMC) with three power modes: Run, Wait, Stop – Low-voltage detection (LVD) with reset or interrupt, selectable trip points – Watchdog with independent clock source (WDOG) – Programmable cyclic redundancy check module (CRC) – Serial wire debug interface (SWD) – Bit manipulation engine (BME) ? Security and integrity modules – 64-bit unique identification (ID) number per chip ? Human-machine interface – Up to 57 general-purpose input/output (GPIO) – Two up to 8-bit keyboard interrupt modules (KBI) – External interrupt (IRQ) ? Analog modules – One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC) – Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)
电话:13723468725
联系人:张 (先生)
QQ:
邮箱:eric@tcccoil.com
地址:坂田街道岗头社区新围仔五和大道4010号九层902
100%产品查看率
会员等级
会员年限