产品概述
The DRV8870DDAR is a 3.6A brushed DC motor driver in 8 pin SO PowerPAD package. The DRV8870 devICe is a brushed-DC motor driver for printers, appliances, industrial equipment and other small machines. Two logic inputs control H bridge driver which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6A peak current. The inputs can be PWM to control motor speed using a choice of current-decay modes. Setting both inputs low enters a low-power sleep mode. It features integrated current regulation based on the analogue input VREF and the voltage on the ISEN pin which is proportional to motor current through an external sense resistor. The ability to limit current to a known level can significantly reduce the system power requirements and bulk capacitance needed to maintain stable voltage especially for motor start-up and stall conditions. The device is fully protected from faults and short circuits, including undervoltage, overcurrent and overtemperature.
Drives one DC motor, one winding of a stepper motor or other loads
Wide 6.5V to 45V operating voltage
Typical RDS(on) (HS + LS) of 565mohm
Peak current drive of 3.6A
PWM control interface
Integrated current regulation
Low power sleep mode
应用
电机驱动与控制, 工业, 便携式器材
产品信息
电机类型: 直流有刷 输出数: 1输出 输出电流: 2A 输出电压: - 驱动器封装类型: SO PowerPAD 针脚数: 8引脚 电源电压最小值: 6.5V 电源电压最大值: 45V 工作温度最小值: -40°C 工作温度最高值: 125°C 产品范围: - 汽车质量标准: - MSL: MSL 1 -无限制
免责声明: 以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责。买卖IC网对此不承担任何保证责任。
以上是,DRV8870DDAR正品保障公司现货量大从优,品牌:TI 型号:DRV8870DDAR的信息