- 您现在的位置：买卖IC网 > PDF目录22559 > 011AL FEMTOCLOCKS-TM CRYSTAL-TO- 3.3V LVPECL CLOCK GENERATOR PDF资料下载
参数资料
| 型号： | 011AL |
| 英文描述： | FEMTOCLOCKS-TM CRYSTAL-TO- 3.3V LVPECL CLOCK GENERATOR |
| 中文描述： | FEMTOCLOCKS -商标晶体至3.3V的LVPECL时钟发生器 |
| 文件页数： | 12/13页 |
| 文件大小： | 231K |
| 代理商： | 011AL |
843011AG
www.icst.com/products/hiperclocks.html
REV. B DECEMBER 10, 2004
8
Integrated
Circuit
Systems, Inc.
ICS843011
FEMTOCLOCKSCRYSTAL-TO-
3.3V LVPECL CLOCK GENERATOR
POWER CONSIDERATIONS
This section provides information on power dissipation and junction temperature for the ICS843011.
Equations and example calculations are also provided.
1. Power Dissipation.
The total power dissipation for the ICS843011 is the sum of the core power plus the power dissipated in the load(s).
The following is the power dissipation for V
CC = 3.3V + 5% = 3.465V, which gives worst case results.
NOTE: Please refer to Section 3 for details on calculating power dissipated in the load.
Power (core)
MAX = VCC_MAX * IEE_MAX = 3.465V * 93mA = 322.2mW
Power (outputs)
MAX = 30mW/Loaded Output pair
Total Power
_MAX (3.465V, with all outputs switching) = 322.2mW + 30mW = 352.2mW
2. Junction Temperature.
Junction temperature, Tj, is the temperature at the junction of the bond wire and bond pad and directly affects the reliability of the
device. The maximum recommended junction temperature for HiPerClockSTM devices is 125°C.
The equation for Tj is as follows: Tj =
θ
JA * Pd_total + TA
Tj = Junction Temperature
θ
JA = Junction-to-Ambient Thermal Resistance
Pd_total = Total Device Power Dissipation (example calculation is in section 1 above)
T
A = Ambient Temperature
In order to calculate junction temperature, the appropriate junction-to-ambient thermal resistance
θ
JA must be used. Assuming a
moderate air flow of 1 meter per second and a multi-layer board, the appropriate value is 90.5°C/W per Table 6 below.
Therefore, Tj for an ambient temperature of 85°C with all outputs switching is:
85°C + 0.352W * 90.5°C/W = 116.9°C. This is below the limit of 125°C.
This calculation is only an example. Tj will obviously vary depending on the number of loaded outputs, supply voltage, air flow,
and the type of board (single layer or multi-layer).
TABLE 6. THERMAL RESISTANCE
θθθθθ
JA
FOR
8-PIN TSSOP, FORCED CONVECTION
θθθθθ
JA by Velocity (Meters per Second)
0
1
2.5
Multi-Layer PCB, JEDEC Standard Test Boards
101.7°C/W
90.5°C/W
89.8°C/W
相关PDF资料 |
PDF描述 |
|---|---|
| 0398900406 | 17.5 A, STRIP TERMINAL BLOCK, 1 ROW, 1 DECK |
| 0399-0-15-01-47-01-04-0 | BERYLLIUM COPPER, TIN LEAD (200) OVER NICKEL FINISH, PCB TERMINAL |
| 0399-0-15-15-47-27-04-0 | BERYLLIUM COPPER, GOLD (30) OVER NICKEL FINISH, PCB TERMINAL |
| 0399-1-15-01-47-14-04-0 | BERYLLIUM COPPER ALLOY, GOLD FINISH, PCB TERMINAL |
| 0300-2-15-15-47-14-10-0 | BERYLLIUM COPPER ALLOY, GOLD FINISH, PCB TERMINAL |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 011DZ156A-0082 | 制造商:Airpax 功能描述: |
| 011KD210A-180A | 制造商:Airpax 功能描述:CIRCUIT BREAKER |
| 011RR215A-0231 | 制造商:Airpax 功能描述: |
| -012 | 制造商:Teledyne Industrial 功能描述: |
| 012.9 | 制造商:TEKO 功能描述: |
发布紧急采购，3分钟左右您将得到回复。