- 您现在的位置：买卖IC网 > PDF目录22831 > 03-AP24XS IMPACT PRINTER PANEL MTD PDF资料下载
参数资料
| 型号： | 03-AP24XS |
| 英文描述： | IMPACT PRINTER PANEL MTD |
| 中文描述： | 撞击式印表机面板线粒体 |
| 文件页数： | 5/10页 |
| 文件大小： | 546K |
| 代理商： | 03-AP24XS |
- 4 -
4
PRINTING
4.1
CHARACTER PRINTING
Characters are formed from a 5 x 7 matrix, except for some with descenders which use a 5 x 8
matrix. A standard capital letter is 7 dots high and there is a one dot space between columns. If
there are no descenders present in the dot line then the controller optimises throughput by skipping
the dot line.
The character set includes the full 224 IBM characters as shown in Fig 1.
Text mode prints left to right like a typewriter.
Data mode (reversed/inverted printing) is used in panel-mounting applications.
4.2
GRAPHICS PRINTING
Graphics codes are received as 6-bit dot groups when the control Bit 1 has been set by the
appropriate 'ESC' sequence, for example 'ESC & H02'. Since the graphics mode is cleared after
every dot line, this sequence must be sent each time. Graphics patterns are built up as a
succession of dot lines across the paper, rather like a TV picture. The number of dots and dot
groups varies according to the mechanism, as follows:
Mechanism
M190
M192
Dots/line
144
240
Dot groups
24
40
The most significant bit of each group of 6 dots is always printed first (ie. at the left hand end in text
mode). The printer must always receive a full dot line's worth of code, even if some are blank,
before it will print. Large areas of solid dots are not recommended as they cause overheating and
shorten ribbon life: try shading instead. Heavy graphics printing may also require a higher current
power supply.
4.3
PAPER FEEDING AND SELF TEST
The front panel paper feed button will cause paper to be fed through the mechanism at a rate of
about 6 lines a second. If the paper feed button is pressed during power up then a self test
message and the full character set will be printed. The character set will continue to be printed until
the paper feed button is released. The controller will then revert to normal data entry mode.
4.4
PAPER TAKE-UP
The Ap24XS has the capability via connector J2 to drive a suitable 5V paper take-up device (for
example the Able Systems Ap24PTD).
This signal only drives the PTD when the printer paper feed motor is energised.
相关PDF资料 |
PDF描述 |
|---|---|
| 03-AP24XS40 | IMPACT PRINTER PANEL MTD |
| 03-AP25-24 | IMPACT PRINTER PANEL MTD |
| 0701ATEXFREQ1 | CRYSTAL OSCILLATOR, CLOCK, 0.04 MHz - 12 MHz, TTL OUTPUT |
| 0718BTEXFREQ2 | CRYSTAL OSCILLATOR, CLOCK, 12.1 MHz - 32 MHz, TTL OUTPUT |
| 0718XTEXFREQ3 | CRYSTAL OSCILLATOR, CLOCK, 32 MHz - 60 MHz, TTL OUTPUT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 03-AP24XS40 | 制造商:ABLE SYSTEMS 功能描述:PRINTER IMPACT PANEL MTD 制造商:ABLE SYSTEMS 功能描述:PRINTER, IMPACT PANEL, MTD 制造商:ABLE SYSTEMS 功能描述:PRINTER, IMPACT PANEL, MTD; Printer Type:Desktop; Printer Interface:Serial; Print Speed:1.7 lines/sec; SVHC:No SVHC (19-Dec-2012); Dots per Line:240; External Depth:96mm; External Length / Height:66mm; External Width:113.5mm; ;RoHS Compliant: Yes |
| 03-AP25-24 | 制造商:ABLE SYSTEMS 功能描述:PRINTER IMPACT PANEL MTD 制造商:ABLE SYSTEMS 功能描述:PRINTER, IMPACT PANEL, MTD |
| 03AR2D | 制造商:DELTA ELECTRONICS 功能描述:EMI FILTER 115/250VAC 3A 制造商:Delta Electronics Inc 功能描述:Power Entry Module EMI Filtered M 3 POS 115VAC/250VAC 6A/4A Switch/Fuse ST 1 Port |
| 03ASR-30S | 制造商:JST Manufacturing 功能描述:ASR Series Twin U-Slot Insulation Displacement Connector 3 Point Grip Construction 3 positions |
| 03ATS2187 | 制造商: 功能描述: 制造商:GENISCO FILTER CORPORATIO 功能描述: 制造商:undefined 功能描述: |
发布紧急采购，3分钟左右您将得到回复。