- 您现在的位置：买卖IC网 > Datasheet目录578 > 0638814670 (Molex Inc)TOOL KIT Datasheet资料下载
参数资料
| 型号： | 0638814670 |
| 厂商： | Molex Inc |
| 文件页数： | 4/7页 |
| 文件大小： | 0K |
| 描述： | TOOL KIT |
| 标准包装： | 1 |
| 系列： | * |
| 其它名称： | 063881-4670 63881-4670 638814670 |
Mechanical Feed Metal Strip Applicator
Tool Calibration
To recalibrate this applicator, make sure the power is completely
shut off on the press.
1. The Mini-Mac applicator must be properly installed in the
press.
CONDUCTOR
CRIMP DIE
E2
USE SOFT METAL
SLUG METHOD
2. Crimping dies must be properly installed in the Mini-Mac
applicator.
3. The recommended method of measuring the crimp height of
the conductor dies is the soft metal slug method. See
Figure 4.
4. The slug must have a diameter 0.51mm (.020”) larger than
the “X” No Go dimension before crimping.
5. Place the soft metal slug (solder) into the nest of the bottom
die and crimp (by hand cycling the press) similar to a
terminal. The crimp height can be measured with a blade
“X” CRIMP
HEIGHT
E1
CRIMP PROFILE
Use soft metal slug (solder) method to measure the
“X” dimension. Verify tooling crimp height calibration
by referring to the Go/No Go dimensions shown in
the chart on page 3.
Figure 4
type micrometer or dial caliper, (Dimension “X”).
6. Adjustment of the crimp height can be accomplished by indexing the conductor cam. The letter “A” gives the
loosest position and “K” gives the tightest position. A total adjustment of 0.50mm (.020”) can be achieved by
adjusting the conductor cam.
Note: If the crimp height is too tight on the setting “A”, check the shut height of the press. See the Industrial Mini-
Mac Applicator Manual Section 2.1 for adjustments.
Doc No: ATS-638814600
Revision: C
Release Date: 05-27-11
Revision Date: 05-16-12
UNCONTROLLED COPY
Page 4 of 7
相关PDF资料 |
PDF描述 |
|---|---|
| 0638815670 | TOOL KIT |
| 0638815770 | TOOL KIT |
| 0638815800 | MINI MAC APPLICATOR METAL STRIP |
| 0638821070 | TOOL KIT |
| 0638821170 | TOOL KIT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 0638815200 | 制造商:Molex 功能描述:MINI MAC APPLICATOR - METAL STRIP 制造商:Molex 功能描述:MINI MAC APPLICATOR - METAL STRIP - Bulk |
| 0638815270 | 制造商:Molex 功能描述:TOOL KIT 制造商:Molex 功能描述:TOOL KIT - Bulk |
| 0638815300 | 制造商:Molex 功能描述:Mini-Mac Applicator 制造商:Molex 功能描述:CONN ACC MINI MAC APPLICATOR TOOL - Bulk |
| 0638815370 | 制造商:Molex 功能描述:TOOL KIT 制造商:Molex 功能描述:TOOL KIT - Bulk |
| 0638815400 | 制造商:Molex 功能描述:MINI-MAC APPLICATOR 制造商:Molex 功能描述:MINI MAC APPLICATOR - METAL STRIP - Bulk |
发布紧急采购，3分钟左右您将得到回复。