参数资料
| 型号： | 07588 |
| 厂商： | Desco |
| 文件页数： | 1/1页 |
| 文件大小： | 0K |
| 描述： | FOOT GROUND HEEL ECONOMY |
| 标准包装： | 1 |
| 类型： | 鞋跟带 |
| 带闭合： | 钩及环 |
| 带材料： | 橡胶 |
| 电阻（欧姆）： | 1M |
| 尺寸： | 统一尺寸 |
| 颜色： | 黑 |
| 其它名称： | 07588-ND 16-1068 |
DATE:
March
2010
DRAWING
NUMBER:
07588
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710
WEB SITE: www.Desco.com
PHONE (909) 627-8178 FAX (909) 627-7449 FAX REQUEST (909) 627-7126
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
FAX (781) 575-0172
Key:
A.
Two layer rubber composite material. Material consists of a layer which
provides a non-marring interior surface that will not blemish shoes and a
blackconductivelayertogroundviaESDflooring.
B.
Non-marring inner layer.
C.
24” conductive ribbon.
D.
One megohm fully insulated current limiting resistor.
E.
Hook and loop adjustable closure.
F.
Elastic material for comfort.
Meets the requirements of ANSI/ESD S20.20,JEDEC-108/9, MIL-HDBK-263A, MIL-STD-1686,
DOD-STD-2000.
ElectricalPropertiesarenothumiditydependentmeetingANSI/ESDS20.20flooring/footwear
required limit <3.5 x 10E7 ohms tested at 12% and 50% relative humidity per ESD SP9.2
Caution: The foot grounder is for ESD control. It will not reduce or increase your risk of receiv-
ing electric shock when using or working on electrical equipment.
Non-Marking
Inner Layer
Black Outer
Layer
Test Method
Electrical Properties:
Charge Decay
< 0.01 sec.
<0.01 sec.
FTMS-1018, Method 4046
RTG w/1 megohm resistor
<10 megohm
ESD SP.92
Physical Properties:
Abrasion, 1000 grams,
4000 cycles
<1.0 grams loss
<0.1 grams loss
ASTM-D3389 Method B
Hardness
65 ± 5 Shore A
ASTM-D2240
One Megohm Economy Heel Grounder
Note:
“ESD protective footwear is designed to reduce body charge levels by supplying a
conductive path from the body to the floor material. Heel and toe grounders shall be
worn on both feet to insure effective use.
The ability of footwear to remove a charge from a charged person who moves from
an unprotected area to a protected one, or moves about on an ESD floor should be
evaluated. As a person contacts an ESD floor material with static control footwear, the
body charge should dissipate leaving minimal residual charge. (ESD Handbook ESD
TR20.20-2008 section 5.3.3.3.4 Footwear Proper Usage)
For additional information on the use and maintenance of foot grounders please ask
for Technical Bulletins
2010 DESCO INDUSTRIES INC.
Employee Owned
相关PDF资料 |
PDF描述 |
|---|---|
| 07590 | STRAP GROUND ESD FOOT/SOLE 1 MEG |
| 07595 | FOOT GROUND TOE LINED 2MEG |
| 07601 | CLIPBOARD STATIC 9X12 1/2 |
| 07602 | CLIPBOARD STATIC 9X12-1/2" GREEN |
| 09027 | WRISTBAND ELASTIC LARGE 4MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 0758856410 | 制造商:MOLEX 制造商全称:Molex Electronics Ltd. 功能描述:2.00mm (.079) Pitch VHDM? Board-to-Board Daughtercard Receptacle, Right Angle, 6-Row, 2 Blade Power Module, 2 Circuits |
| 0758856870 | 功能描述:CONN RCPT DGHTRCARD 6ROW R/A 2MM RoHS:是 类别:连接器，互连式 >> 背板 - 专用 系列:VHDM® 75885 标准包装:30 系列:GbX® 75237 连接器用途:背板 连接器类型:接头，公引脚 连接器类型:GbX®，左侧导轨 位置数:250 加载位置的数目:全部 间距:0.073"（1.85mm） 行数:10 列数:25 安装类型:通孔 端子:压配式 触点布局，典型:125 差分对 特点:屏蔽 触点表面涂层:金 触点涂层厚度:- 颜色:灰 包装:托盘 额定电流:- 材料可燃性额定值:UL94 V-0 工作温度:- 额定电压:120V 其它名称:75237-2215752372215 |
| 0758886000 | 制造商:Molex 功能描述:Conn Backplane Power RCP 2 POS Press Fit ST Thru-Hole 2 Terminal 1 Port Tube 制造商:Molex 功能描述:VHDM BP 6 ROW POWER ASSY 2CKT - Rail/Tube |
| 0758886050 | 制造商:Molex 功能描述:VHDM BP 6 ROW BP PWR ASSY 50 S 制造商:Molex 功能描述:VHDM BP 6 ROW BP PWR ASSY 50"SAU GF 2CKT - Rail/Tube 制造商:Molex 功能描述:VHDM BP 6 ROW BP PWR GF 2CKT |
| 0758888000 | 制造商:Molex 功能描述:Conn VHDM RCP 3 POS 2mm Solder ST Thru-Hole Tube 制造商:Molex 功能描述:VHDM BP 8 ROW POWER ASSY 3CKT - Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。