P
o
wer
Distrib
ution
PD
20
.
01
*
Han Q 8/0
500 V
16 A
Features
Technical characteristics
o 8 contact chambers taking
the Han E power contacts
o Space-saving and compact design
o Leading protective ground
o Crimp terminal with standard
Han E contacts
o Use of standard tools
o Insert is suitable for the hoods and housings
of the series Han Q 8/0
o The contacts can be removed with
the aid of a removal tool from the
termination side
o
conform product
Current carrying capacity
The current carrying capacity is limited by maximum temperature
of materials for inserts and contacts including terminals. The
current capacity-curve is valid for continuous, not interrupted
current-loaded contacts of connectors when simultaneous power
on all contacts is given, without exceeding the maximum termpe-
rature.
Control and test procedures according to DIN IEC 60 512-3.
W
o
rking
current
(A)
Ambient temperature (C°)
Control and test procedures according to DIN IEC 512-3
Wire gauge:
2.5 mm2
1.5 mm2
* DESINA is a registered trademark
Specifications
DIN VDE 0627
DIN VDE 0110
DINEN61 984
Approvals
,
Inserts
Number of contacts
8 + PE
Electrical data
acc. to DIN EN 61 984
16 A
500 V
6 kV
3
Rated current
Rated voltage
Rated impulse voltage
Pollution degree
Mounted metal hood
16 A 230/400 V 4 kV
– Pollution degree 2 also
16 A 400/690 V 6 kV 2
Rated voltage
acc. to UL/CSA
600 V
Insulation resistance
≥ 1010
Material
Polycarbonate
Temperature range
– 40 OC … + 125 OC
Flammability acc. to UL 94
V 0
Mechanical working life
- mating cycles
≥ 500
Contacts
Material
Copper alloy
Surface
- hard-silver plated
3 m Ag
- hard-gold plated
2 m Au over 3 m Ni
Contact resistance
Crimp terminal
< 1 m
- mm
0.5 - 2.5 mm
partly loaded up to 4 mm
is possible
- AWG
20 - 14
Plastic hoods/housings
Material
Polycarbonate RAL 9005
Locking element
Polyamide RAL 9005
Flammability acc. to UL 94
V 0
Hood/Housings seal
NBR
Temperature range
– 40 OC … + 125 OC
Degree of protection
acc. to DIN EN 60 529
in locked position
IP 65
Inserts
Number of contacts
8