- 您现在的位置：买卖IC网 > Datasheet目录542 > 1-47387-0 (TE Connectivity)TOOL HEAD CRIMP 16-14AWG PIDG Datasheet资料下载
参数资料
| 型号： | 1-47387-0 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/9页 |
| 文件大小： | 0K |
| 描述： | TOOL HEAD CRIMP 16-14AWG PIDG |
| 标准包装： | 1 |
| 系列： | PIDG™, Plasti-Grip™ |
| 压接或电缆尺寸： | 14-16 AWG |
| 压接手柄： | 1213563-1，1213804 |
| 连接器类型： | 端子及连接件 |
| 配用： | 8-321233-1-ND - CONN SPADE 14-16AWG #8 BLUE 8-36158-1-ND - CONN RING 14-16AWG #6 BLUE 9-160402-2-ND - CONN PIN WIRE 14-16AWG BLUE PIDG 8-326882-1-ND - CONN RING 14-16AWG #6 BLUE 324603-ND - CONN TERM PIDG RECT 14-16AWG #10 324170-ND - CONN SPADE FLNG 14-16AWG #8 BLUE 8-324159-1-ND - CONN RING 14-16AWG #4 BLUE 8-321283-1-ND - CONN TERM PIDG RECT 14-16AWG #8 8-320575-1-ND - CONN RING 14-16AWG #5/16 BLUE 8-320562-5-ND - CONN BUTT SPLICE 14-16AWG BLUE 更多... |
| 相关产品： | 1213563-1-ND - TOOL DAHT ADAPTER ASSEMBLY |
PIDG and PLASTI- GRIP Terminal and Splice Crimping Heads
1. Remove quick pins from the adapter assembly.
Refer to Figure 1.
PIDG and PLASTI--GRIP Terminals
408- 10029
“B”
2. Insert crimping head into the adapter assembly.
3. After the crimping head is properly aligned,
insert the quick pins through the two holes in the
adapter and through the holes in the crimp head.
NOTE The quick pins will “snap” into position when they
are properly inserted.
i
“C”
“C”
“ B ”
“ B ”
PIDG
Terminal
PLASTI--GRIP
Terminal
“C ”
PIDG
Nylon Insulation
Restricting
Terminal
“B” Equals Wire Barrel
“C” Equals Insulation Barrel
3.3. Removal
Locator
DANGER
To avoid personal injury, ALWAYS disconnect the
battery from the tool before removing crimping
head.
Terminal Tongue
Positioned Under
Locator
Remove the quick pins from the crimping head; then
remove the crimping head from the tool holder.
4. CRIMPING PROCEDURES
DANGER
To avoid personal injury, ALWAYS keep fingers
clear of crimping jaws when operating the tool.
Never place anything within the crimping jaws
except Tyco Electronics terminals or splices.
Locator
Wire Barrel Against Locator
Figure 3
4.1. Terminal Crimping Procedure
1. Strip wire to dimensions shown in Figure 2. DO
NOT nick wire strand or use wires with nicked or
missing conductor strands.
2. Center the terminal or splice wire barrel in the
appropriate crimp chamber. See Figure 3.
3. Depress the trigger to advance the moving ram.
This closes the crimp jaws in order to hold the
terminal in place. DO NOT deform the wire barrel.
4. Insert stripped wire into terminal until the end of
the conductor butts against the locator as shown in
Figure 3.
5. Activate the tool to complete the crimp. The
crimp tool automatically returns to the first position
of the cycle when the crimp is complete.
6. Refer to Section 5 and Figure 6 for crimp
inspection.
4.2. Butt Splice Crimping Procedure
1. Strip wire to dimensions shown in Figure 2. DO
NOT nick wire strand or use wires with nicked or
missing conductor strands.
2. Position splice between crimping jaws so that
the window indent slides under the locator of crimp
head. See Figure 4A.
3. Depress the trigger to advance the moving ram.
This closes the crimp jaws to hold the terminal in
place. DO NOT deform the wire barrel.
4. Insert stripped wire into wire barrel of splice until
the end of the conductor is against the splice wire
stop. See Figure 4A.
5. Activate tool to complete the crimp.
6. To crimp the other half of the butt splice,
reposition it in the crimping jaws and repeat Steps
1 through 5. If the splice cannot be turned, rotate
crimping head. See Figure 4B.
Rev B
Tyco Electronics Corporation
3 of 9
相关PDF资料 |
PDF描述 |
|---|---|
| 1-49935-0 | TOOL HEAD CRIMP 22-10AWG SOLIS |
| 0010844061 | 084 DIA ASSY HDR HSG PIN 94V-0 |
| 0011020001 | INSERTION TOOL HT1807 |
| 0011020003 | INSERTION TOOL HT1353 |
| 0011030003 | EJECTOR EXTRACTION TOOL HT1884 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1473870000 | 功能描述:PCB TERMINAL 7.5MM 制造商:weidmuller 系列:* 零件状态:有效 标准包装:175 |
| 1-47387-7 | 功能描述:手工工具 DA BAT TL HD 16-14 PIDG RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool |
| 1473890000 | 功能描述:PCB TERMINAL 7.5MM 制造商:weidmuller 系列:* 零件状态:有效 标准包装:190 |
| 1473898-1 | 功能描述:汽车连接器 025 12POS CAP ASY V TIN RoHS:否 制造商:Amphenol SINE Systems 产品:Contacts 系列:ATP 位置数量: 型式:Female 安装风格: 端接类型: 触点电镀:Nickel |
| 1473898-4 | 功能描述:汽车连接器 025 12 POS CAP ASY V RoHS:否 制造商:Amphenol SINE Systems 产品:Contacts 系列:ATP 位置数量: 型式:Female 安装风格: 端接类型: 触点电镀:Nickel |
发布紧急采购，3分钟左右您将得到回复。