参数资料
| 型号： | 1-5-3435 |
| 厂商： | 3M (TC) |
| 文件页数： | 3/5页 |
| 文件大小： | 0K |
| 描述： | SHEETING REFLECTIVE 1" X 5YD |
| MSDS 材料安全数据表： | 3430 MSDS |
| 标准包装： | 1 |
| 系列： | 3435 |
| 胶带类型： | 反射 |
| 胶合剂： | 压敏胶合剂（PSA） |
| 宽： | 1.00"（25.40mm） |
| 长度： | 15'（4.6m）5 码 |
| 颜色： | 蓝 |
| 使用： | 标记，反射 |
| 包装： | 散装 |
| 其它名称： | 3M10082 |
Cleaning
Storage and
Packaging
Installation
Health and Safety
Information
General Performance
Considerations
Signs that require cleaning should be flushed with water, then washed with a detergent solution
and a soft bristle brush or sponge. Avoid pressure that may damage the sign face. Flush with water
following washing. Do not use solvents to clean signs. See Information Folder 1.10.
3M ? Engineer Grade Prismatic Sheeting should be stored in a cool, dry area, preferably at 65–75oF
(18–24oC) and 30 –50% relative humidity and should be applied within one year of purchase. Rolls
should be stored horizontally in the shipping carton. Partially used rolls should be returned to the
shipping carton or suspended horizontally from a rod or pipe through the core. Unprocessed sheets
should be stored flat. Finished signs and applied blanks should be stored on edge.
Screen processed signs must be protected with SCW 568 slipsheet paper. Place the glossy side of the
slipsheet against the sign face. Double faced signs must have the glossy side of the slipsheet against
each face of the sign.
Unmounted screened faces must be stored flat and interleaved with SCW 568 slipsheet, glossy side
against the sign face.
Avoid banding, crating, or stacking signs. Package for shipment in accordance with commercially
accepted standards to prevent movement and chafing. Store sign packages indoors on edges.
Panels or finished signs must remain dry during shipment and storage. If packaged signs become
wet, unpack immediately and allow signs to dry. Refer to Information Folder 1.11 for instructions on
packing for storage and shipment.
Nylon washers are required when twist style fasteners are used to mount the sign.
Read all health hazard, precautionary and first aid statements found in the Material Safety Data Sheet,
and/or product label of chemicals prior to handling or use.
Minimum coefficient of retroreflection, chromaticity limits, and daytime luminance factor (Y%) for
the engineer grade prismatic sheeting series 3430 are given in Table A and Table B, respectively.
Durability Considerations
The durability of 3M ? Engineer Grade Prismatic Sheeting and finished signs using 3M’s matched
component materials (Table C) will depend upon substrate selection and preparation, compliance
with recommended application procedures, geographic area, exposure conditions, and maintenance.
Maximum durability of series 3430 can be expected in applications subject to vertical exposure
on stationary objects when processed and applied to properly prepared aluminum according to 3M
recommendations. Periodic sign inspection and regular sign replacement are strongly recommended
in order for sign owners to establish their own effective service life expectation beyond any durability
warranty, if provided.
Substrate Considerations
The user must determine the suitability of any nonmetallic sign backing for its intended use. Substrate
manufacturer recommendations for preparation should be followed as well as guidance provided in
Information Folder 1.7. Applications to unprimed, excessively rough or non-weather resistant surfaces
can shorten the performance of such applications. Sign failures caused by the substrate or
improper surface preparation are not the responsibility of 3M.
Exposure Considerations
Exposure to severe or unusual conditions can shorten the performance of such applications. Signs in
mountainous areas that are covered by snow for prolonged periods may also have reduced durability.
Atmospheric conditions in certain geographic areas may result in reduced durability.
Custom Process Colors Considerations
Custom colors, certain lighter colors, heavily toned color or blends containing yellow or gold may
have reduced durability.
3
相关PDF资料 |
PDF描述 |
|---|---|
| 5-4646-1-3R | 3M 4646 VHB 1" X 3" - 5/PACK |
| 5-4910-1-2R | 3M 4910 VHB 1" X 2" - 5/PACK |
| S-304H-CCTK | CONN SOCKET 4POS W/KEEPER JONES |
| 5-9088-3/4-4R | DOUBLE COAT TAPE 3/4"X4" 5/PACK |
| 5-9088-1-3R | DOUBLE COAT TAPE 1"X3" 5/PACK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1534355 | 功能描述:环形公制连接器 SACCBP-M12MSB- 2CON-M16/1,0-910 RoHS:否 制造商:3M Electronic Solutions Division 产品类型:Connectors 系列:M12 外壳类型:Plug 触点数量:4 安装风格:Cable 端接类型:Solder Cup 电流额定值:4 A |
| 1534358-1 | 制造商:TE Connectivity 功能描述:RETAINER - Bulk 制造商:TE CONNECTIVITY 功能描述:RETAINER |
| 1534368 | 功能描述:环形公制连接器 SACCBP-M12MSB- 2CON-M16/2,0-910 RoHS:否 制造商:3M Electronic Solutions Division 产品类型:Connectors 系列:M12 外壳类型:Plug 触点数量:4 安装风格:Cable 端接类型:Solder Cup 电流额定值:4 A |
| 1-5-3437 | 功能描述:SHEETING REFLECTIVE 1" X 5YD RoHS:是 类别:胶带，粘合剂 >> 带 系列:3437 MSDS 材料安全数据表:42x, 43x, 140x, 141x, 1449, 1450, 433,438,33xx MSDS 标准包装:1 系列:425 胶带类型:铝箔 胶合剂:丙烯酸 背衬，载体:铝，极软的 厚度:0.0046"（4.6 mils，0.117mm） 厚度 - 胶合剂:0.0016"（1.6 mils，0.041mm） 厚度 - 背胶，载体，衬垫:0.0028"（2.8 mils，0.071mm） 宽:2.00"（50.80mm） 长度:15'（4.6m）5 码 颜色:银 使用:热耗散，反射 温度范围:-65 ~ 300°F（-54 ~ 149°C） 包装:散装 工具箱:3M10454-ND - MRO TAPE KIT - PREMIUM3M10451-ND - MRO TAPE KIT - STANDARDTK3434-ND - HOME TAPE KIT - PREMIUM3M10395-ND - DESIGN ENGR SOLUTION SEMINAR KIT3M10394-ND - DESIGN ENGR METAL FOIL TAPE KIT 其它名称:3M9778 |
| 1534370-1 | 功能描述:汽车连接器 MICROPIGTAIL W. HAM.ELEM./POF COD.A RoHS:否 制造商:Amphenol SINE Systems 产品:Contacts 系列:ATP 位置数量: 型式:Female 安装风格: 端接类型: 触点电镀:Nickel |
发布紧急采购，3分钟左右您将得到回复。