- 您现在的位置：买卖IC网 > PDF目录18489 > 1-576782-0 (TE Connectivity)TOOL HEAD CRIMP 14AWG STRATO PDF资料下载
参数资料
| 型号： | 1-576782-0 |
| 厂商： | TE Connectivity |
| 文件页数： | 3/7页 |
| 文件大小： | 0K |
| 描述： | TOOL HEAD CRIMP 14AWG STRATO |
| 标准包装： | 1 |
| 系列： | Strato-Therm |
| 压接或电缆尺寸： | 14 AWG |
| 压接手柄： | 1901235，525432-1 |
| 连接器类型： | PIDG Strato-Therm 端子 |
| 配用： | 50841-ND - CONN RING 14AWG #1/4 WHITE 50839-1-ND - CONN RING TONG 14AWG #6 PIDG 50840-ND - TERMINAL,PIDG TFL R 14 8 50840-1-ND - CONN RING TONGUE 14AWG #10 |
| 相关产品： | 525432-1-ND - TOOL ADAPTER HEAVY HEAD ASSY |
3. Insert stripped wire into terminal until the end of
the conductor butts against the locator as shown in
Figure 3.
Refer to Figure 3 and the following steps for terminal
crimping procedures.
Figure 3
1. Strip the wire to the dimension provided in
Figure 2, being careful to avoid nicking or
damaging the conductor(s).
4. Activate the tool to complete the crimp. The
crimp tool automatically returns to the first position
of the cycle when the crimp is complete.
5. Observe the dot code on the finished crimp to
ensure that the correct terminal and crimping head
combination was used. See Figure 2.
6. Refer to Section 4 and Figure 4 for terminal
crimp inspection procedure.
Inspect crimped terminals by checking the features
described in Figure 4. Terminals, not meeting the
described conditions should NOT Be used.
The insulation crimping section of the crimping head
has three positions: 1 (tight), 2 (medium), and 3
(loose). To adjust the section:
1. Insert the insulation crimp adjustment pins into
the No. 3 position. Refer to Figure 1.
2. Place the terminal into the crimping jaws as
shown in Figure 3.
3. Insert the UNSTRIPPED wire into ONLY the
insulation barrel (refer to Figure 3) portion of the
terminal.
4. Close the tool to complete the crimp.
5. Removed the crimped terminal and check the
insulation crimp by bending the wire back and forth
once. The terminal should retain its grip on the wire
insulation. If the wire pulls out, set the insulation
crimp adjustment pins to the next higher position
(No. 2).
6. Perform another crimp and repeat the
adjustment as necessary until the correct insulation
grip is attained. Do not use a tighter setting than
required.
2. Depress the trigger to advance the moving ram.
This action closes the crimp jaws in order to hold
the terminal in place. DO NOT deform the wire
barrel.
相关PDF资料 |
PDF描述 |
|---|---|
| 51AAA-B24-A13L | POT 5K OHM 1/2" SQ 1W CERMET |
| 7L-38.400MCG-T | OSC TCXO 38.400 MHZ 2.5V SMD |
| 39SB-1NB-103 | POT 10K OHM 1/4W PLASTIC WO/SW |
| 91A1A-B28-D20L | POT 100K OHM 5/8" SQ 1/4W PLAS |
| B32520C104K289 | FILM CAP 0.1000UF 10% 63V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 157687 | 制造商:NGC 功能描述: |
| 15-7695-10 | 功能描述:IC 与器件插座 ELEVATOR STRIP LINE 15 PINS RoHS:否 制造商:Molex 产品:LGA Sockets 节距:1.02 mm 排数: 位置/触点数量:2011 触点电镀:Gold 安装风格:SMD/SMT 端接类型:Solder 插座/封装类型:LGA 2011 工作温度范围:- 40 C to + 100 C |
| 1576AS667-5 | 功能描述:环形MIL规格后盖 RoHS:否 制造商:Amphenol PCD MIL 类型:MIL-DTL-38999 III, IV 系列:AS85049 产品类型:Environmental EMI/RFI Backshells 外壳类型:Straight 外壳大小:18 外壳材质:Aluminum Alloy |
| 1576AS667-7 | 功能描述:环形MIL规格后盖 RoHS:否 制造商:Amphenol PCD MIL 类型:MIL-DTL-38999 III, IV 系列:AS85049 产品类型:Environmental EMI/RFI Backshells 外壳类型:Straight 外壳大小:18 外壳材质:Aluminum Alloy |
| 1576AS735-1 | 功能描述:Circular Connector 制造商:amphenol industrial operations 系列:- 包装:- 零件状态:有效 连接器类型:- 针脚数:- 外壳尺寸 - 插件:- 外壳尺寸，MIL:- 安装类型:- 端接:- 紧固类型:- 朝向:- 侵入防护:- 外壳材料，镀层:- 触头镀层:- 特性:- 触头镀层厚度:- 额定电流:- 电压 - 额定:- 工作温度:- 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。