参数资料
| 型号： | 1.5KE82AG |
| 厂商： | ON Semiconductor |
| 文件页数： | 5/8页 |
| 文件大小： | 0K |
| 描述： | TVS 1500W 82V UNIDIRECT AXIAL |
| 产品变化通告： | Specification Update Storage Temp Range 14/Aug/2008 Product Discontinuation 02/Jan/2007 |
| 标准包装： | 500 |
| 系列： | Mosorb™ |
| 电压 - 反向隔离（标准值）： | 70.1V |
| 电压 - 击穿： | 77.9V |
| 功率（瓦特）： | 1500W |
| 电极标记： | 单向 |
| 安装类型： | 通孔 |
| 封装/外壳： | DO-201AD，轴向 |
| 供应商设备封装： | 轴向 |
| 包装： | 散装 |
1N6267A Series
1N6373, ICTE-5, MPTE-5,
through
1N6389, ICTE-45, C, MPTE-45, C
1.5KE6.8CA
through
1.5KE200CA
24 V
1000
500
200
T L = 25 ° C
t P = 10 m s
V BR(NOM) = 6.8 to 13 V
20 V
43 V
1000
500
200
T L = 25 ° C
t P = 10 m s
V BR(NOM) = 6.8 to 13 V
20 V
24 V
43 V
75 V
100
50
100
50
20
10
5
2
20
10
5
2
180 V
120 V
1
0.3 0.5 0.7 1 2 3 5 7 10 20 30
1
0.3 0.5 0.7 1 2 3 5 7 10 20 30
D V BR , INSTANTANEOUS INCREASE IN V BR ABOVE V BR(NOM) (VOLTS)
D V BR , INSTANTANEOUS INCREASE IN V BR ABOVE V BR(NOM) (VOLTS)
Figure 6. Dynamic Impedance
1
0.7
0.5
0.3
0.2
0.1
0.07
0.05
0.03
0.02
10 m s
PULSE WIDTH
10 ms
1 ms
100 m s
0.01
0.1
0.2
0.5
1
2 5 10
20
50
100
D, DUTY CYCLE (%)
Figure 7. Typical Derating Factor for Duty Cycle
APPLICATION NOTES
RESPONSE TIME
In most applications, the transient suppressor device is
placed in parallel with the equipment or component to be
protected. In this situation, there is a time delay associated
with the capacitance of the device and an overshoot
condition associated with the inductance of the device and
the inductance of the connection method. The capacitance
effect is of minor importance in the parallel protection
scheme because it only produces a time delay in the
transition from the operating voltage to the clamp voltage as
shown in Figure 8.
The inductive effects in the device are due to actual
turn-on time (time required for the device to go from zero
current to full current) and lead inductance. This inductive
effect produces an overshoot in the voltage across the
equipment or component being protected as shown in
Figure 9. Minimizing this overshoot is very important in the
application, since the main purpose for adding a transient
suppressor is to clamp voltage spikes. These devices have
excellent response time, typically in the picosecond range
and negligible inductance. However, external inductive
effects could produce unacceptable overshoot. Proper
circuit layout, minimum lead lengths and placing the
suppressor device as close as possible to the equipment or
components to be protected will minimize this overshoot.
Some input impedance represented by Z in is essential to
prevent overstress of the protection device. This impedance
should be as high as possible, without restricting the circuit
operation.
DUTY CYCLE DERATING
The data of Figure 1 applies for non-repetitive conditions
and at a lead temperature of 25 ° C. If the duty cycle increases,
the peak power must be reduced as indicated by the curves
of Figure 7. Average power must be derated as the lead or
http://onsemi.com
5
相关PDF资料 |
PDF描述 |
|---|---|
| TMM-148-01-S-S | CONN HEADER 48POS SNGL 2MM T/H |
| TMM-149-01-S-S | CONN HEADER 49POS SNGL 2MM T/H |
| 1.5KE8.2ARL4G | TVS 1500W 8.2V UNIDIRECT AXIAL |
| RGH1608-2C-P-184-B | RES 180K OHM 1/6W 0.1% 0603 SMD |
| TSW-101-26-T-D | CONN HEADER 2POS .100" DUAL TIN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 15KE82CA | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:1500W TRANSIENT VOLTAGE SUPPRESSOR |
| 15KE8V2A | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:1500W TRANSIENT VOLTAGE SUPPRESSOR |
| 15KE8V2CA | 制造商:DIODES 制造商全称:Diodes Incorporated 功能描述:1500W TRANSIENT VOLTAGE SUPPRESSOR |
| 15KE91 | 制造商:ONS 功能描述:ON SEMICONDUCTOR S7C5B |
| 15KE91A | 制造商:GI 功能描述:New |
发布紧急采购，3分钟左右您将得到回复。