参数资料
型号: 101-1028
厂商: Rabbit Semiconductor
文件页数: 100/172页
文件大小: 0K
描述: MODULE RABBITCORE RCM3750
标准包装: 1
系列: RabbitCore®
模块/板类型: MPU 核心模块
适用于相关产品: RCM3750
User’s Manual
27
4.2 Serial Communication
The RCM3750 board does not have any serial transceivers directly on the board. How-
ever, a serial interface may be incorporated on the board the RCM3750 is mounted on. For
example, the Prototyping Board has RS-232, RS-485 and IrDA transceiver chips.
4.2.1 Serial Ports
There are five serial ports designated as Serial Ports A, C, D, E, and F. All five serial ports
can operate in an asynchronous mode up to the baud rate of the system clock divided by 8.
An asynchronous port can handle 7 or 8 data bits. A 9th bit address scheme, where an
additional bit is sent to mark the first byte of a message, is also supported.
Serial Port A is normally used as a programming port, but may be used either as an asyn-
chronous or as a clocked serial port once application development has been completed and
the RCM3750 is operating in the Run Mode.
Serial Ports C and D can also be operated in the clocked serial mode. In this mode, a clock
line synchronously clocks the data in or out. Either of the two communicating devices can
supply the clock.
Serial Ports E and F can also be configured as HDLC serial ports. The IrDA protocol is
also supported in SDLC format by these two ports.
Serial Port F shares its pins with Serial Ports C and D on header J1, as shown in Figure 7.
The selection of port(s) depends on your need for two clocked serial ports (Serial Ports C
and D) vs. a second HDLC serial port (Serial Port F).
Figure 7. RCM3750 Serial Ports C, D, and F
The serial ports used are selected with the serXOpen function call, where X is the serial
port (C, D, or F). Remember that RxC and RxD on Serial Ports C and D cannot be used if
Serial Port F is being used
TXC
RXC
RXD
TXD
TXF
RXF
PC2
PC3
PC0
PC1
PG2
PG3
J1: 23
J1: 24
J1: 21
J1: 22
相关PDF资料
PDF描述
101-1087 MODULE RABBITCORE RCM 3365
1B31AN IC SIGNAL COND STRAIN GAGE 28DIP
1B32AN IC SIGNAL COND HYBRID 28-DIP
1B41BN IC RTD SIGNAL COND HYBRID 38-DIP
1B51BN IC THERMCPL SGNL COND ISOL 38DIP
相关代理商/技术参数
参数描述
1011-02-CA 功能描述:熔丝座配件 1011-02-CA RoHS:否 制造商:Schurter 产品:Caps 类型:Slot Knob 用于:FEU, FEU (Med), FAU, FAC
1011-03 功能描述:熔丝座配件 1011-03 STAINLSS STL RoHS:否 制造商:Schurter 产品:Caps 类型:Slot Knob 用于:FEU, FEU (Med), FAU, FAC
101-1030-BE-00100 功能描述:CABLE USB 1.1 A MALE-B MALE 1M RoHS:是 类别:电缆组件 >> USB 系列:- 标准包装:1 系列:- 配置:A 公型至 Mini-B 公型(4 位置) 长度:3.28'(1.00m) 技术规格:USB 2.0 屏蔽:屏蔽 样式:- 其它名称:1175-1077
101-1030-BE-00200 功能描述:CABLE USB 1.1 A MALE-B MALE 2M RoHS:是 类别:电缆组件 >> USB 系列:- 标准包装:1 系列:- 配置:A 公型至 Mini-B 公型(4 位置) 长度:3.28'(1.00m) 技术规格:USB 2.0 屏蔽:屏蔽 样式:- 其它名称:1175-1077
101-1030-BE-00300 功能描述:CABLE USB 1.1 A MALE-B MALE 3M RoHS:是 类别:电缆组件 >> USB 系列:- 标准包装:1 系列:- 配置:A 公型至 Mini-B 公型(4 位置) 长度:3.28'(1.00m) 技术规格:USB 2.0 屏蔽:屏蔽 样式:- 其它名称:1175-1077