收藏本站
参数资料
型号： 101-1155
厂商： Rabbit Semiconductor
文件页数： 125/134页
文件大小： 0K
描述： KIT DEVELOPMENT USA RCM4200
标准包装： 1
系列： RabbitCore 4000
类型： MPU 核心模块
适用于相关产品： RCM4200
所含物品： RabbitCore 模块、开发板、交流适配器、缆线和 Dynamic C? 光盘
其它名称： 316-1126
84
RabbitCore RCM4200
6.5 Run the PINGME.C Sample Program
Connect the crossover cable from your computer’s Ethernet port to the RCM4200 mod-
ule’s RJ-45 Ethernet connector. Open this sample program from the SAMPLES\TCPIP\
ICMP
folder, compile the program, and start it running under Dynamic C. The crossover
cable is connected from your computer’s Ethernet adapter to the RCM4200 module’s RJ-45
Ethernet connector. When the program starts running, the green LINK light on the RCM4200
module should be on to indicate an Ethernet connection is made. (Note: If the LINK light
does not light, you may not be using a crossover cable, or if you are using a hub with
straight-through cables perhaps the power is off on the hub.)
The next step is to ping the module from your PC. This can be done by bringing up the
MS-DOS window and running the pingme program:
ping 10.10.6.101
or by Start > Run
and typing the entry
ping 10.10.6.101
The ping routine will ping the module four times and write a summary message on the
screen describing the operation.
6.6 Running Additional Sample Programs With Direct Connect
The following sample programs are in the Dynamic C SAMPLES\RCM4200\TCPIP\
folder.
BROWSELED.C
—This program demonstrates a basic controller running a Web page.
Two “device LEDs” are created along with two buttons to toggle them. Users can use
their Web browser to change the status of the lights. The DS2 and DS3 LEDs on the
Prototyping Board will match those on the Web page. As long as you have not modified
the TCPCONFIG 1 macro in the sample program, enter the following server address in
your Web browser to bring up the Web page served by the sample program.
http://10.10.6.100.
Otherwise use the TCP/IP settings you entered in the TCP_CONFIG.LIB library.
PINGLED.C
—This program demonstrates ICMP by pinging a remote host. It will flash
LEDs DS2 and DS3 on the Prototyping Board when a ping is sent and received.
SMTP.C
—This program demonstrates using the SMTP library to send an e-mail when
the S2 and S3 switches on the Prototyping Board are pressed. LEDs DS2 and DS3 on
the Prototyping Board will light up when e-mail is being sent.
相关PDF资料
PDF描述
M3DGK-6036J IDC CABLE - MKR60K/MC60G/MCS60K
MAX6428OSUR+T IC MONITOR BAT LP SOT23-3
M3DEK-6036J IDC CABLE - MKR60K/MC60G/MCE60K
AFK106M50D16T-F CAP ALUM 10UF 50V 20% SMD
VI-26R-EY-S CONVERTER MOD DC/DC 7.5V 50W
相关代理商/技术参数
参数描述
101-1156 功能描述:开发板和工具包 - 其他处理器 RCM4200 Dev Kit (Intl) RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
101-115-6110-EV 功能描述:编码器 1mA PUSH 220gf 12 PULSE 24 DETENTS RoHS:否 制造商:Avago Technologies 产品:Optical Encoders 类型:Absolute 每转脉冲: 制动器数量: 通道数量:2 安装风格:Through Hole 端接类型:Solder Pin 输出: 轴类型: 带开关: 电源电压:5 V 工作温度范围:- 40 C to + 115 C
101-115-6191-EV 功能描述:编码器 1mA PUSH 220gf 12 PULSE 24 DETENTS RoHS:否 制造商:Avago Technologies 产品:Optical Encoders 类型:Absolute 每转脉冲: 制动器数量: 通道数量:2 安装风格:Through Hole 端接类型:Solder Pin 输出: 轴类型: 带开关: 电源电压:5 V 工作温度范围:- 40 C to + 115 C
101-1157 功能描述:开发板和工具包 - 其他处理器 RCM4100 Analog Dev Kit (US) RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
101-1158 功能描述:开发板和工具包 - 其他处理器 RCM4100 Analog Dev Kit (Intl) RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*