参数资料
型号: 101-1156
厂商: Rabbit Semiconductor
文件页数: 71/134页
文件大小: 0K
描述: KIT DEVELOPMENT INT'L RCM4200
标准包装: 1
系列: RabbitCore 4000
类型: MPU 模块
适用于相关产品: RCM4200
所含物品: RabbitCore 模块、开发板、交流适配器、缆线和 Dynamic C? 光盘
User’s Manual
35
4.2 Serial Communication
The RCM4200 module does not have any serial driver or receiver chips directly on the
board. However, a serial interface may be incorporated on the board the RCM4200 is
mounted on. For example, the Prototyping Board has an RS-232 transceiver chip.
4.2.1 Serial Ports
There are five serial ports designated as Serial Ports A, B, C, D, and E. All five serial ports
can operate in an asynchronous mode up to the baud rate of the system clock divided by 8.
An asynchronous port can handle 7 or 8 data bits. A 9th bit address scheme, where an
additional bit is sent to mark the first byte of a message, is also supported.
Serial Port A is normally used as a programming port, but may be used either as an asyn-
chronous or as a clocked serial port once application development has been completed and
the RCM4200 is operating in the Run Mode.
Serial Port B is shared by the RCM4200 module’s A/D converter, and is set up as a
clocked serial port. Since this serial port is set up for synchronous serial communication
on the RCM4200 model, you will lose the A/D converter’s functionality if you try to use
the serial port in the asynchronous mode. Serial Port B is available without any restrictions
on the RCM4210.
Serial Port C is shared with the serial flash, and is set up as a clocked serial port. PE7 is set
up to provide the SCLKC output to the serial flash, but PD2 also provides the SCLKC
ouput automatically when Serial Port C is used as a clocked serial port. Since this serial
port is available for synchronous serial communication on either RCM4200 model, you
will lose the serial flash’s functionality if you try to use the serial port in the asynchronous
mode.
NOTE: Since Serial Port C is shared with the serial flash, exercise care if you attempt to
use Serial Port C for other serial communication. Your application will have to manage
the sharing negotiations to avoid conflicts when reading or writing to the serial flash.
Serial Port D may also be used as a clocked serial port. Note that PD0 provides the
SCLKD ouput automatically when Serial Port D is set up as a clocked serial port.
Serial Port E, which is available only on the RCM4210, can also be configured as an
SDLC/HDLC serial port. The IrDA protocol is also supported in SDLC format by Serial
Port E. Serial Port E must be configured before it can be used. The sample program
IOCONFIG_SWITCHECHO.C
in the Dynamic C SAMPLES\RCM4200\SERIAL folder
shows how to configure Serial Port E.
相关PDF资料
PDF描述
101-0533 KIT DEV RABBIT3000/RCM3100
101-1158 KIT DEVELOPMENT INT'L RCM4100
101-0530 KIT TOOL FOR LP3500 INTL
0210390926 CABLE JUMPER 1MM .102M 23POS
ECM18DTBS CONN EDGECARD 36POS R/A .156 SLD
相关代理商/技术参数
参数描述
101-115-6110-EV 功能描述:编码器 1mA PUSH 220gf 12 PULSE 24 DETENTS RoHS:否 制造商:Avago Technologies 产品:Optical Encoders 类型:Absolute 每转脉冲: 制动器数量: 通道数量:2 安装风格:Through Hole 端接类型:Solder Pin 输出: 轴类型: 带开关: 电源电压:5 V 工作温度范围:- 40 C to + 115 C
101-115-6191-EV 功能描述:编码器 1mA PUSH 220gf 12 PULSE 24 DETENTS RoHS:否 制造商:Avago Technologies 产品:Optical Encoders 类型:Absolute 每转脉冲: 制动器数量: 通道数量:2 安装风格:Through Hole 端接类型:Solder Pin 输出: 轴类型: 带开关: 电源电压:5 V 工作温度范围:- 40 C to + 115 C
101-1157 功能描述:开发板和工具包 - 其他处理器 RCM4100 Analog Dev Kit (US) RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
101-1158 功能描述:开发板和工具包 - 其他处理器 RCM4100 Analog Dev Kit (Intl) RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压:
101-1159 功能描述:射频开发工具 WIRELESS CONTROL APP KIT RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V