- 您现在的位置：买卖IC网 > Datasheet目录905 > 101-1288 (Rabbit Semiconductor)KIT APPLICATION SIMPLE SENSOR Datasheet资料下载
参数资料
| 型号： | 101-1288 |
| 厂商： | Rabbit Semiconductor |
| 文件页数： | 4/4页 |
| 文件大小： | 0K |
| 描述： | KIT APPLICATION SIMPLE SENSOR |
| 特色产品： | Simple Sensor Application Kit |
| 标准包装： | 1 |
| 系列： | RabbitCore 4000 |
| 传感器类型： | 温度 |
| 接口： | 1 线 串行 |
| 电源电压： | 12V |
| 嵌入式： | 是，其它 |
| 已供物品： | 板，模块，线缆，CD，硬件，电源，512 MB miniSD 卡，带 SD 卡适配器 |
| 已用 IC / 零件： | RCM4300 |
| 其它名称： | 316-1178 |
Run a Sample Program
Once the RCM4300 is connected as described in the preceding pages, start Dynamic C by double-clicking on
the Dynamic C icon on your desktop or in your Start menu. Select Store Program in Flash on the “Com-
piler” tab in the Dynamic C Options > Project Options menu. Make sure that the Enable Separate
Instruction & Data Space option is checked. Then click on the “Communications” tab and verify that Use
USB to Serial Converter is selected to support the USB programming cable. Click OK .
You may have to select the COM port assigned to the USB programming cable on your PC. In Dynamic C,
select Options > Project Options , then select this COM port on the “Communications” tab, then click OK .
Use the File menu to open the sample program PONG.C , which is in the Dynamic C SAMPLES folder. Press
function key F9 to compile and run the program.The STDIO window will open on your PC and will display a
small square bouncing around in a box.
Where Do I Go From Here?
You are now ready to go on to other sample programs and to develop your own applications. Application
Note AN420, Simple Sensor Application Kit , takes you through loading and using the sample programs
included with this Application Kit, and describes Rabbit’s software drivers. T he RCM4300 User's Manual
provides complete hardware reference information and describes the software function calls for the
RCM4300 RabbitCore modules. The FAT File System document on the Dynamic C CD describes the FAT
file system and discusses the function calls and sample programs available for the Dynamic C implemen-
tation of the FAT file system.
Troubleshooting
If Dynamic C cannot find the target system (error message "No Rabbit Processor Detected." ):
? Check that the RCM4300 is powered correctly — the red PWR LED on the Prototyping Board should be lit
when the RCM4300 is mounted on the Prototyping Board and the AC adapter is plugged in.
? Check both ends of the programming cable to ensure that they are firmly plugged into the PC and the
PROG connector, not the DIAG connector, is plugged in to the programming port on the RCM4300 with
the marked (colored) edge of the programming cable towards pin 1 of the programming header.
? Ensure that the RCM4300 module is firmly and correctly installed in its socket on the Prototyping Board.
? If a program compiles and loads, but then loses target communication before you can begin debugging, it is
possible that your PC cannot handle the default debugging baud rate. Locate the Serial Options dialog in
the Dynamic C Options > Project Options > Communications menu. Choose a lower debug baud
rate.
Press <Ctrl-Y> to force Dynamic C to recompile the BIOS. You should receive a Bios compiled
successfully message once these steps are completed successfully.
If there are any other problems:
? Use the Dynamic C Help menu to get further assistance with Dynamic C.
? Check the Rabbit Technical Bulletin Board and forums at www.rabbit.com/support/bb/
and at www.rabbit.com/forums/ .
? Use the Technical Support e-mail form at www.rabbit.com/support/ .
NOTE: If you purchased your Simple Sensor Application Kit through a distributor or through a Rabbit
partner, contact the distributor or partner first for technical support.
020–0154
?
090131–A
相关PDF资料 |
PDF描述 |
|---|---|
| 10110818-1005LF | CABLE ASSY SFP+ 32AWG .5M |
| 10110819-3100LF | CABLE ASSY SFP+ 28AWG 10M |
| 101A083-3/42-0 | MOLDED END CAP ROUND SIZE 83 |
| 1025-60 | CABLE TEST BNC MALE-BNC FEMALE |
| 1062672011 | F/O CABLE MTP/JMPR 500MM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 101-1290 | 制造商:Digi International 功能描述:ZIGBEE CONTROL APPLICATION KIT - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT ZIGBEE CTRL APPLICATION 制造商:Rabbit Semiconductor 功能描述:ZigBee Control Application Kit |
| 1011290000 | 功能描述:TERM W/ LEVER 2STB 2.3MM WM WH RoHS:是 类别:连接器，互连式 >> 接线座 - Din 轨道，通道 系列:W 标准包装:1 系列:CLIPLINE UK 类型:断连 断开类型:保险丝，杆 位置数:3 级别数目:1 端子 - 宽度:18.0mm 端接类型:螺钉 电流 - IEC:32A 电压 - IEC:690V 电流 - UL:30A 电压 - UL:600V 线规或范围 - AWG:3-18 AWG 线规或范围 - mm²:1.5-25mm² 特点:- 颜色:黑 保险丝类型:小型，10.3mm x 38mm 材料 - 绝缘体:聚酰胺（PA），尼龙 材料可燃性额定值:UL94 V-0 剥线长度:12mm 其它名称:UK 10.3-HESI N 3POLUK10.3-HESIN3POL |
| 101-1291 | 功能描述:处理器配件 PrSpUni110/240/12VDC 1A, 6 ADAPT Tin Wire RoHS:否 制造商:Olimex Ltd. 产品:Cable 用于: |
| 101-1292 | 功能描述:处理器配件 Antenna Cable Assembly RoHS:否 制造商:Olimex Ltd. 产品:Cable 用于: |
| 101-1293 | 功能描述:Zigbee/802.15.4开发工具 RCM4510 w (ZB) DEVKIT RoHS:否 制造商:Silicon Labs 产品:Development Kits 工具用于评估:EM35x 频率:2.4 GHz 接口类型:USB 工作电源电压: |
发布紧急采购，3分钟左右您将得到回复。