- 您现在的位置：买卖IC网 > PDF目录67307 > 101250418 EINSCHRAUBVERBIND GERADE 4MM G0.125 PDF资料下载
参数资料
| 型号： | 101250418 |
| 英文描述： | EINSCHRAUBVERBIND GERADE 4MM G0.125 |
| 中文描述： | EINSCHRAUBVERBIND收听毫米G0.125 |
| 文件页数： | 17/17页 |
| 文件大小： | 269K |
| 代理商： | 101250418 |
Philips Semiconductors Programmable Logic Devices
Product specification
10H20EV8/10020EV8
ECL programmable array logic
October 22, 1993
121
AC TEST CIRCUIT
PULSE
GENERATOR
SCOPE
RT
L1
L3
VCC
VCO1
VCO2
VEE
SCOPE
L2
RT
CL
I1
I11
CLK/I12
FM
FN
FX
FY
DUT
+2.0V + 0.010V
–2.5V + 0.010V FOR 10020EV8
–3.2V + 0.010V FOR 10H20EV8
25
F
0.01
F
NOTES:
1. Use decoupling capacitors of 0.1
F and 25F from GND to VCC, and 0.01F and 25F from GND to VEE (0.01 and 0.1F capacitors
should be NPO Ceramic or MLC type). Decoupling capacitors should be placed as close as physically possible to the DUT and lead
length should be kept to less than 1/4 inch (6mm).
2. All unused inputs should be connected to either HIGH or LOW state consistent with the LOGIC function required.
3. All unused outputs are loaded with 50
to GND.
4. L1 and L2 are equal length 50 impedance lines. L3, the distance from the DUT pin to the junction of the cable from the Pulse
Generator and the cable to the Scope, should not exceed 1/4 inch (6mm).
5. RT = 50 terminator internal to Scope.
6. The unmatched wire stub between coaxial cable and pins under test must be less than 1/4 inch (6mm) long for proper test.
7. CL = Fixture and stray capacitance ≤ 3pF.
8. Any unterminated stubs connected anywhere along the transmission line between the Pulse Generator and the DUT or between the
DUT and the Scope should not exceed 1/4 inch (6mm) in length (refer to section on AC setup procedure).
9. All 50
resistors should have tolerance of ± 1% or better.
10. Test procedures are shown for only one input or set of input conditions. Other inputs are tested in the same manner.
25
F
0.1
F
相关PDF资料 |
PDF描述 |
|---|---|
| 101250618 | EINSCHRAUBVERBIND GERADE 6MM G0.125 |
| 101250628 | EINSCHRAUBVERBIND GERADE 6MM G0.25 |
| 101250818 | EINSCHRAUBVERBIND GERADE 8MM G0.125 |
| 101250828 | EINSCHRAUBVERBIND GERADE 8MM G0.25 |
| 101250838 | EINSCHRAUBVERBIND GERADE 8MM G0.375 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 101250518 | 制造商:IMI NORGREN 功能描述:PNEUFIT ST ADP 5 1/8 |
| 10125055-101LF | 功能描述:HEADER 制造商:amphenol fci 系列:* 零件状态:要求报价 标准包装:564 |
| 10125055-11JLF | 功能描述:HEADER 制造商:amphenol fci 系列:* 零件状态:要求报价 标准包装:360 |
| 10125055-12JLF | 功能描述:HEADER 制造商:amphenol fci 系列:* 零件状态:要求报价 标准包装:360 |
| 101250618 | 制造商:NORGREN 功能描述:STRAIGHT ADAPTOR 6MM1/8 制造商:NORGREN 功能描述:STRAIGHT ADAPTOR, 6MM1/8 制造商:NORGREN 功能描述:STRAIGHT ADAPTOR, 6MM1/8; Fitting Type:Straight Adaptor; Bore Size:6mm; External Diameter:6mm; SVHC:No SVHC (18-Jun-2012); Bore Diameter Max:6mm; Material:Brass; Operating Temperature Max:80C; Operating Temperature Min:-20C; Outer ;RoHS Compliant: NA |
发布紧急采购，3分钟左右您将得到回复。