- 您现在的位置：买卖IC网 > PDF目录106295 > 1021ZD4I-28TE13 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, DSO8 PDF资料下载
参数资料
| 型号： | 1021ZD4I-28TE13 |
| 元件分类： | 电源管理 |
| 英文描述： | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, DSO8 |
| 封装： | 3 X 3 MM, 0.80 MM HEIGHT, MSOP FOOTPRINT, TDFN-8 |
| 文件页数： | 4/17页 |
| 文件大小： | 107K |
| 代理商： | 1021ZD4I-28TE13 |
12
CAT1021, CAT1022, CAT1023
Preliminary Information
Doc. No. 3009, Rev. E
Acknowledge Polling
Disabling of the inputs can be used to take advantage of
the typical write cycle time. Once the stop condition is
issued to indicate the end of the host’s write opration, the
CAT1021/22/23 initiates the internal write cycle. ACK
polling can be initiated immediately. This involves issuing
the start condition followed by the slave address for a
write operation. If the device is still busy with the write
operation, no ACK will be returned. If a write operation
has completed, an ACK will be returned and the host can
then proceed with the next read or write operation.
WRITE PROTECTION PIN (WP)
The Write Protection feature (CAT1021 only) allows the
user to protect against inadvertent memory array
programming. If the WP pin is tied to VCC, the entire
memory array is protected and becomes read only. The
CAT1021 will accept both slave and byte addresses,
but the memory location accessed is protected from
programming by the device’s failure to send an
acknowledge after the first byte of data is received.
Read Operations
The READ operation for the CAT1021/22/23 is initiated
in the same manner as the write operation with one
exception, the R/
W bit is set to one. Three different
READ operations are possible: Immediate/Current
Address READ, Selective/Random READ and
Sequential READ.
SCL
SDA
8TH BIT
STOP
NO ACK
DATA OUT
89
SLAVE
ADDRESS
S
A
C
K
DATA
N
O
A
C
K
S
T
O
P
BUS ACTIVITY:
MASTER
SDA LINE
S
T
A
R
T
Figure 10. Immediate Address Read Timing
相关PDF资料 |
PDF描述 |
|---|---|
| 110IMY15-15-15-8RI | 2-OUTPUT 16.8 W DC-DC REG PWR SUPPLY MODULE |
| 110IMY15-24-24-8RZ | 2-OUTPUT 16.8 W DC-DC REG PWR SUPPLY MODULE |
| 12IWR1-15-NT | 1-OUTPUT 1 W DC-DC REG PWR SUPPLY MODULE |
| 15D18GT40 | 2-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 12ICR1-15-15-S | 2-OUTPUT 1 W DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1022 | 功能描述:电池座、电池扣和电池接头 "AAA" DUAL SMT battery holder RoHS:否 制造商:Eagle Plastic Devices 产品:Battery Snaps 电池组电池大小:9 V 电池数量:1 端接类型:Snaps 颜色:Black 材料:Polyvinyl Chloride (PVC) 安装风格:Snap-In |
| 1022.0101 | 功能描述:基本/快动开关 SNAP ACTION RoHS:否 制造商:Omron Electronics 触点形式:SPDT 执行器:Lever 电流额定值:5 A 电压额定值 AC:250 V 电压额定值 DC:30 V 功率额定值: 工作力:120 g IP 等级:IP 67 NEMA 额定值: 端接类型:Wire 安装:Panel |
| 1022.09.565-003 | 制造商:Walter schrickel 功能描述:Bulk |
| 1022.09.780-005 | 制造商:Walter schrickel 功能描述:Bulk |
| 1022.09.780-006 | 制造商:Walter schrickel 功能描述:Bulk |
发布紧急采购，3分钟左右您将得到回复。