参数资料
| 型号： | 10350-1230-00 |
| 厂商： | 3M |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | JUNCTION SHELL 50POS METAL |
| 产品变化通告： | MDR Junction Shell Change 13/Apr/2010 |
| 标准包装： | 100 |
| 系列： | 103 |
| 附件类型： | 两件后壳 |
| 位置数： | 50 |
| 缆线类型： | 扁平 |
| 线缆出口： | 180° |
| 屏蔽： | 屏蔽 |
| 材质： | 金属 - 锌 |
| 镀层： | 镍 |
| 硬件： | 组装硬件，垫圈 |
| 特点： | 销锁 |
| 颜色： | 银 |
| 其它名称： | 05400753621 10350123000 5400753621 54007536215 80610655286 |
3
Instructions for Assembly of Mini D Ribbon
(MDR) Non-Shielded Plugs 101XX-8000
Description
The tools listed are required to assemble the 3M MDR
8000 IDC Wiremount non-shielded plug. These plugs can
be installed as terminal end connectors or in daisy chains.
Note: 3M studies have shown a 30 AWG Solid Conductor Cable
is the preferred cable to terminate to the MDR 101XX-8000
series plug.
Tool Setup
1
10982-4
Height Gauge
Width Gauge
Cable Guides
Assembly press
Locator plate
Platen
Height Gauge
Width Gauge (XX position)
Cable Stopper (XX position)
2
3640 or 10985
10980-3
10981-5
10982-4
10983-XX
10984-XX
3
Place the 10982-4 height gauge on the
base plate of the press (locator plate
removed). Bring the handle down fully
and adjust the shaft to touch the gauge.
Raise the handle, remove the gauge then
turn the adjustment screw one quarter turn
(90 degrees) clockwise.
1
Adjust the width of the cable guides on
the 10980-3 locator plate to correspond to
the connector. Use width gauge 10983-
XX for connectors having XX positions.
Remove the width gauge when finished.
2
Install the 10981-5 platen and the locator
plate on the press.
3
相关PDF资料 |
PDF描述 |
|---|---|
| 10350-52F0-008 | CONN JUNCTION SHELL 50POS STRGT |
| 10380-12R1-00 | JUNCTION SHELL METAL 80POS |
| 10380-A500-00 | CONN JUNCTION SHELL 80POS 60DEG |
| 103A0-12R1-00 | JUNCTION SHELL METAL 100POS |
| 103A0-A200-00 | CONN JUNCTION SHELL 100POS STRGT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 103-5012-EV | 功能描述:滑动开关 ON-ON DPDT Solder RoHS:否 制造商:C&K Components 触点形式:SPDT 开关功能:Momentary 触点额定值: 端接类型: 执行器:Extended, Side 安装风格:SMD/SMT 触点电镀:Silver 封装: |
| 103-5012-EVX | 功能描述:滑动开关 ON-ON DPDT Solder RoHS:否 制造商:C&K Components 触点形式:SPDT 开关功能:Momentary 触点额定值: 端接类型: 执行器:Extended, Side 安装风格:SMD/SMT 触点电镀:Silver 封装: |
| 10350-12T0-00 | 功能描述:JUNCTION SHELL 50POS FLAT RoHS:否 类别:连接器，互连式 >> D-Sub，D 形 - 后壳，防护罩 系列:103 标准包装:1 系列:L17 附件类型:一件后壳 位置数:15 缆线类型:圆形 线缆出口:180° 屏蔽:屏蔽 材质:金属 镀层:- 硬件:组装硬件，缆线夹 特点:- 颜色:银 配用:L717TWA3W3P-ND - CONN D-SUB PLUG 3W3POS HOUSINGFCC17-A15SM-250-ND - FILTER D-SUB 15POS SKT SLD CUPFCC17-A15PM-250-ND - FILTER D-SUB 15POS PIN SLD CUP17HD026SAA000-ND - CONN D-SUB RCPT 26POS SLD CUP17HD026PAA000-ND - CONN D-SUB PLUG 26POS SLD CUPFCE17-A15SM-250-ND - FILTER D-SUB 15POS SCKT SLD CUPFCE17-A15PM-250-ND - FILTER D-SUB 15POS PIN SLD CUPL77SDA15S-ND - CONN D-SUB RCPT 15POS GOLD FLASHL717SDA15P-ND - CONN D-SUB PLUG 15POS GOLD FLASHL77DA15S-ND - CONN DSUB RCPT 15POS SLD CUP更多... |
| 1035013 | 制造商:SAWTEK 功能描述:ELECTRONIC COMPONENT |
| 103-5013 | 功能描述:滑动开关 ON-ON DPDT Right Angle PC Mount RoHS:否 制造商:C&K Components 触点形式:SPDT 开关功能:Momentary 触点额定值: 端接类型: 执行器:Extended, Side 安装风格:SMD/SMT 触点电镀:Silver 封装: |
发布紧急采购，3分钟左右您将得到回复。