- 您现在的位置：买卖IC网 > Datasheet目录590 > 1055439-1 (TE Connectivity)TOOL CABLE FIXTURE SUB-ASSY Datasheet资料下载
参数资料
| 型号： | 1055439-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 4/4页 |
| 文件大小： | 0K |
| 描述： | TOOL CABLE FIXTURE SUB-ASSY |
| 标准包装： | 1 |
| 系列： | * |
| 工具箱： | 1055469-1-ND - TOOL TNC/BNC SOLDER ASSY KIT |
408-8780
DANGER
STOP
To avoid personal injury, be sure to follow all local
safety practices when using solder and solder
equipment.
Use the following instruction to press the dielectric
bushing into the connector subassembly.
1. Thread the insertion tool into connector
subassembly.
NOTE
8. Solder according to the connector specific
instructions.
Fixture should be clamped vertically in vise to keep
housing seated against locator tool.
i
6.2. Using Type B Locating Tools
The solder assembly kit contains two Type B locator
tools. These tools are used to confine the connector
dielectric, which aids in providing proper cable seating
when soldering to flexible cable. To insure proper
connector assembly, follow connector specific
instructions.
7. USING DIELECTRIC TOOLS
Solder Assembly Kit 1055466-1 contains three
dielectric tools. Two dielectric (insertion) tools are
used to insert the dielectric bushing into the connector
housing. The dielectric (recess) tool is used to
compress expanded cable dielectric after soldering
semi-rigid coaxial cable to the connector housing, if
required.
Rev A
2. Insert the dielectric into insertion tool housing.
3. Place insertion tool plunger into position.
4. Press the plunger until the flange bottoms on the
tool housing.
8. USING LOCKING RING PLIERS
The locking ring pliers are used to compress the
retaining ring, allowing installation of the coupling nut
on specific connectors. Use the pliers as follows:
1. Place retaining ring (and gasket) on connector
housing.
2. Compress the retaining ring with the retaining
ring pliers.
3. Push coupling nut on to housing and over the
retaining ring.
4. Check to make sure the coupling nut rotates
freely after the retaining ring is in place.
9. REVISION SUMMARY
Since the previous release of this document, the new
company logo was applied.
4 of 4
相关PDF资料 |
PDF描述 |
|---|---|
| 1060002000 | ST QTERM (3MM PC+)12 W/ADH+ACC |
| 1060002100 | SC QTERM (3MM PC+) 12 CONN |
| 1060002300 | SC QTERM (3MM SM) 12 CONN |
| 1060003000 | LC QTERM MM 1.6&2.0MM CLB 12CONN |
| 1060003100 | LC QTERM MM BARE FIBER 12 CONN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 1055440-1 | 制造商:TE Connectivity 功能描述:Connector Accessories Clamp Insert 制造商:TE Connectivity 功能描述:CONN ACC CLAMP INSERT - Bulk 制造商:TE CONNECTIVITY 功能描述:INTERCONNECT TOOL |
| 1055441-1 | 功能描述:RF 连接器 INSERT ASSY RoHS:否 制造商:Bomar Interconnect 产品:Connectors 射频系列:BNC 型式:Jack (Female) 极性: 触点电镀:Gold 阻抗: 端接类型:Solder 主体类型:Straight Bulkhead 电缆类型: |
| 1055442-1 | 功能描述:折皱器 LOCATOR TOOL RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 10-554422-35S | 制造商:Amphenol Corporation 功能描述:10-554422-35S - Bulk |
| 10-554423-35F | 制造商:Amphenol Corporation 功能描述:10-554423-35F - Bulk |
发布紧急采购，3分钟左右您将得到回复。