参数资料
| 型号： | 110IMX35D05D15-8 |
| 厂商： | Power-One |
| 文件页数： | 15/15页 |
| 文件大小： | 0K |
| 描述： | CONVERT DC/DC 2X 5V, 2X 15V 35W |
| 标准包装： | 5 |
| 系列： | * |
IMX35 Series Data Sheet
?
Table 17: Electric strength test voltages
35 Watt Quad-Output DC-DC Converters
Characteristic
Factory test >1 s
Equivalent DC voltage
Insulation resistance
Input to
(outputs+case)
20/40IMX35 1
1.2
1.5
>100
Input to
(outputs+case)
70/110IMX35 1
1.8
2.5
>100
Outputs to
case
all models 1
0.5
0.7
–
Between
outputs
all models
0.15 2
0.2 2
–
Unit
kVAC
kVDC
M ?
at 500 VDC
1
2
For open-frame models (option Z), only the insulation input to outputs is tested.
The test voltage between outputs is not applied as routine test.
Isolation
The electric strength test is performed in the factory as a
routine test in accordance with EN 50116, EN 60950, and UL
Options
i: Inhibit (Negative Shutdown Logic)
60950 and should not be repeated in the field. Power-One will
not honor any warranty claims resulting from electric strength
field tests.
should be connected to Vi– to enable the output (active low
logic, fail safe).
Voltage at pin 8:
The outputs of the converter may be enabled or disabled by
means of a logic signal (TTL, CMOS, etc.) applied to the inhibit
pin 8. If the inhibit function is not required the inhibit (pin 8)
Converter operating:
Converter disabled:
–10 V to 0.8 V
2.4 V to 20 V or left
open-circuit
06138a
4 Vi+
8 i
2 Vi –
Fig. 19
If the inhibit pin is not used, connect it to Vi–.
Z: Open Frame
For applications, where the protection by a housing is not
necessary or in the case that the motherboard should be
lacquered after fitting the converter.
Note: The converters shall not be exposed to cleaning processes,
as this will damage the glue of the ferrite cores.
G: RoHS-6
Converters with a type designation ending by G are RoHS-
compliant for all six substances.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical
components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written
consent of the respective divisional president of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on
the date manufactured. Specifications are subject to change without notice.
BCD20009-G Rev AC, 06-May-2013
Page 15 of 15
相关PDF资料 |
PDF描述 |
|---|---|
| 20IMX35D15D15-8 | CONVERT DC/DC 4X 15V 35W |
| 20IMX35D12D12-8 | CONVERT DC/DC 4X 12V 35W |
| OSTEZ235150 | CONN PLUG HEADER 23PS 5.08MM |
| 20IMX35D05D15-8 | CONVERT DC/DC 35W 2X 5V, 2X 15V |
| 20IMX35D05D05-8 | CONVERT DC/DC 4X 5V 35W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 110IMX35D05D15-8G | 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| 110IMX35D05D15-8Z | 功能描述:DC/DC CONVERTER DUAL 5V 15V 制造商:bel power solutions 系列:Melcher IMX35 包装:散装 零件状态:有效 类型:隔离模块 输出数:4 电压 - 输入（最小值）:60V 电压 - 输入（最大值）:150V 电压 - 输出 1:5V 电压 - 输出 2:15V 电压 - 输出 3:15V 电流 - 输出（最大值）:1.4A，600mA，600mA 功率（W） - 制造系列:35W 电压 - 隔离:2.5kV（2500V） 应用:ITE（商业） 特性:远程开/关，OCP，OTP，SCP，UVLO 安装类型:通孔 封装/外壳:19-DIP 模块（17 7 引线） 大小/尺寸:2.87" 长 x 1.88" 宽 x 0.35" 高（72.8mm x 47.8mm x 8.9mm） 工作温度:-40°C ~ 85°C 效率:88% 功率（W） - 最大值:32W 标准包装:15 |
| 110IMX35D12D12-8 | 功能描述:DC/DC转换器 35W (4x 12V) DC Input (60-150V) RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| 110IMX35D12D12-8G | 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| 110IMX35D12D12-8IZ | 制造商:Power-One 功能描述: |
发布紧急采购，3分钟左右您将得到回复。