参数资料
型号: 110IMX35D15D15-8I
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 4-OUTPUT 35 W DC-DC REG PWR SUPPLY MODULE
封装: 3 X 2.500 INCH, 10.50 MM HEIGHT, MA-17
文件页数: 6/15页
文件大小: 191K
代理商: 110IMX35D15D15-8I
AUG 13, 2002
Rev 1.0
Page 14 of 15
www.power-one.com
IMX35 Series: 35W DC-DC Converters
Product Specifications
9-36V, 18-75V, 40-121V & 60-150V Inputs
Aug 2002
Dual/Triple/Quad Outputs 3.3V, 5V, 12V & 15V
Safety and Installation Instructions
Installation Instructions
Installation of the DC-DC converters must strictly follow the
national safety regulations in compliance with the enclo-
sure, mounting, creepage, clearance, casualty, markings
and segregation requirements of the end-use application.
Connection to the system shall be made via a printed cir-
cuit board with hole diameters of 1.5 mm for the pins.
The units should be connected to a secondary circuit.
Check for hazardous voltages before altering any connec-
tions.
Do not open the module.
Ensure that a unit failure (e.g. by an internal short-circuit)
does not result in a hazardous condition. See also: Safety
of operator accessible output circuit.
Input Fuse
To prevent excessive current flowing through the input sup-
ply line in case of a short-circuit across the converter input
an external fuse should be installed in a non earthed input
supply line. We recommend a fast acting fuse F8.0A for
20 IMX 35 types, F4.0 A for 40 IMX 35 types, F2.0 A for
70 IMX 35 types and F2.0 A for 110 IMX 35 types.
Standards and approvals
All DC-DC converters are pending to be UL recognized ac-
cording to UL 1950, UL recognized for Canada to CAN/
CSA C22.2 No. 950-95 and LGA approved to IEC/EN
60950 standards.
The units have been evaluated for:
Building in
Basic insulation input to output, based on their maximum
input voltage
The use in a pollution degree 2 environment
Connecting the input to a secondary circuit which is sub-
ject to a maximum transient rating of 1500 V
After approvals the DC-DC converters are subject to manu-
facturing surveillance in accordance with the above men-
tioned UL, CSA, EN and with ISO 9001 standards.
Isolation
The electric strength test is performed as factory test in ac-
cordance with IEC/EN 60950 and UL 1950 and should not
be repeated in the field. Power-One will not honour any
guarantee claims resulting from electric strength field tests.
Table 17: Electric strength test voltages
Characteristic
Input to output
Output to
Unit
IMX 35
output
Electric strength
1.2
kVrms
test voltage 1 s
1.5
0.2
kV DC
Insulation resistance
>100
-
M
at 500 V DC
Partial discharge
Consult factory
-
kV
extinction voltage
Table 18: Pin allocation
Pin No.
Triple
Quadruple
output
1
PUL
2Vi–
Vi–
3
n.c.
4Vi+
Vi+
5
n.c.
Trim or Trim1
6W
W
7
Ref
8
SD or i
11
Vo3–
12
Vo3+
13
Vo2+
14
Vo2–
15
Vo1–
16
n.c.
Vo1+
17
Vo1+
Vo4+
18
Trim1
Vo4–
19
n.c.
Fig. 21
Pin allocation
Protection Degree
The protection degree of the DC-DC converters is IP 30
(not for option Z).
Cleaning Agents
In order to avoid possible damage, any penetration of
cleaning fluids should be prevented, since the power sup-
plies are not hermetically sealed.
However, open cased units (option Z) which leave the fac-
tory unlacquered may be cleaned and lacquered by the
customer.
09122
1
2
3
4
5
6
7
8
11
12
13
14
15
16
17
18
19
Bottom
view
相关PDF资料
PDF描述
12IXR1-05-12-T 2-OUTPUT 1 W DC-DC REG PWR SUPPLY MODULE
12IXR1-1212-S 2-OUTPUT 1 W DC-DC REG PWR SUPPLY MODULE
153-4029B 3-OUTPUT AC-DC REG PWR SUPPLY MODULE
1024PE-25TE13 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDIP8
1027UI-30TE13 2-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO8
相关代理商/技术参数
参数描述
110IMX35D15D15-8Z 功能描述:CONVERT DC/DC 4X 15V 35W RoHS:否 类别:电源 - 板载 >> DC DC Converters 系列:* 标准包装:5 系列:*
110IMX7-03-9 制造商:POWER-ONE 制造商全称:Power-One 功能描述:7 Watt DC-DC Converters
110IMX7-05-05-8 功能描述:DC/DC转换器 7W (2x 5V) DC Input (60-150V) RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
110IMX7-05-05-8G 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
110IMX7-05-05-9 制造商:POWER-ONE 制造商全称:Power-One 功能描述:7 Watt DC-DC Converters